Oil, Gas and Offshore Equipments marketplace, Oil & gas equipments

Untitled Document

Search Here

Rig/Vessel/Equipment Name:
Category:
Subcategory:
Buy/Sell/Hire/Need for hiring:
ID:

Browse equipments

No relevant equipments are found in our database.

Search again

Untitled Document

Featured equipments for sale

Worldoils Marketplace

Worldrigs ID: WR1193

Tug Boat 31m Long for Sale
Tugs for Sale
31m 2700HP Tug Boat for Sale

Vessel Particulars
Length Overall : 31.10 m
L.B.P : 28.72 m
Length Waterline : 30.16 m
Breadth Moulded : 9.50 m
Depth Moulded : 4.20 m
Classification : Bureau Veritas
F.O Capacity : 268 Tons Approx.
F.W Capacity : 46 Tons Approx.
Designed Draft : 3.50 m

Main Machinery
Sea Water Pressure Pump
(3.8 cbm/hr Ejector Pump)
Dirty Oil Pump
(5 cbm/hr Horizontal Gear Pump)

Fresh Water Pressure Pump
(3.8 cbm/hr Ejector Pump)
3tons Anchor Windlass

Bilge / Ballast Pump
(30 cbm/hr Horizontal Self Priming Pump)
50tons Towing Winch

Gs/fire Pump
(30 cbm/hr Horizontal Self Priming Pump)
Oily Water Separator (15ppm)

Fuel Oil Transfer Pump
(10 cbm/hr Horizontal Gear Pump)
3tons Steering Gear

2x99kw@1500rpm Generator
(Cummins)
Twin Disc Mg5321dc Gear Box Ratio = 5.96:1

2x1350hp@1900rpm Main Engine
(Cummins Kta38-m2)
Sewage Treatment Plant

Navigation Equipment
IC-m710 SSB
Furuno FCV-620 Echo Sounder
IC-m320 VHF
Felcom 15 Inmarsat-C
1932 Mark-2 48NM Marine Radar
Mcmurdo ICS Nav5plus Navtex
Furuno SC-50 Saterlite Compass
Furuno GP-32 GPS
SR-150PK Reflector Compass
ACR Pathfinder 3 SART

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
-----------------------------------------------------------------------------------
Search words (for official use only) -
Tug Boat for Sale - 2700hp
31m Length Overall Tugs for Sale
Tugs for Sale
31m 2700hp Tug Boat for Sale
2700hp Tug Boat for Sale
-----------------------------------------------------------------------------------

Tug Boat - 31m 2700HP - for Sale

ID 1193

Worldoils Marketplace

Worldrigs ID: WR1400

16,000TLC Floating Dock for sale
195M Floating Dock for sale

General
Dock type : Integer
Keel laid : 2005
Launched : 2006
Class notation : ZCA Floating Dock

Specifications
Lifting capacity : 16000t
Length over pontoon : 195m
Length of wing walls : 180m
Breadth, between outer wing walls : 45.00m
Breadth of wing wall : 4.00m
Breadth, between inside wing walls : 37.00m

Clear width between fenders : 35.00m
Depth of pontoon at center/side : 4.80 / 4.50m
Depth to top deck above base line : 18.00m
Height of safety deck above base line : 14.20m
Working draft for lifting vessel : 4.30m
Max. immersion draft : 14.50m

Height of keel blocks : 1.50m
Water depth above keel blocks when immersion : 8.20m
Frame spacing : 0.625m
Space between keel blocks : 1.25m
Water ballast tank : 24 sets
Dry pump room : 4 sets
Deballast pump : 6 sets

Time of lifting vessel : ~120 min
Cranes (P/S) : 30tX22m / 15tX22m
Main power supply : From Shore 10kv
Spare power supply : From shore & generator on board 380V

Price & terms : Please enquire using the email form below

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
----------------------------------------------------------------------
Search words (for official use only) :
16,000TLC Floating Dock for sale
2006 Built Floating Dock for sale
195M Floating Dock for sale
Floating Dock - 16,000TLC - For Sale
-----------------------------------------------------------------------

16,000TLC Floating Dock for sale

ID 1400

Worldoils Marketplace

Worldrigs ID: WR361

PSV for sale - 4400bhp
Platform supply vessel PSV UT 705

General :
Porty of Registry : Belize
Year built : 1978
Classification : DNV + 1A1, EO
Length overall : 80.77m
Length bpp : 76.20m

Breadth moulded : 18.00m
Moulded depth : 7.10m
Draft - loaded : 5.61m
Deadweight (approx.) at 4114t
Gross tonnage : 2478 tons
Nett tonnage : 743t

Cargo capacity :
Fuel oil : 600cbm/1.000cbm
Portable water : 470cbm
Drill water/ballast : 1398cbm
Brine : 352cbm
Liquid mud : 424cbm

Cement in bulk : 340cbm
Deck cargo : 2400 tons
Clear deck space : 53m x 15m
Deck strength : 5 tons/sqm
Refrigerated storage capacity
Deep freezer : 7.5 cbm
Cool room : 7.5 cbm

Propulsion :
Main engine : 2 x 2,300 bhp Nohab Polar F212V
Main generators shafts : 2 x 1,040 kVA
Auxiliary engines : Detroit Diesel Allison 12V-71N
Detroit Diesel Allison 6V-71N
Propellers : 2x pitch propellers

Thrusters :
Tunnel thruster : Ulstein 2 x 500hp Ulstein TV 90
Tunnel stern thruster : Ulstein 1x 800hp Ulstein TV 150
Rudders : 2 independent rudders with active flap

Cargo pump capacity :
Fuel oil : 120cbm/hr @ 90m head
Portable water : 100cbm/hr @ 90m head
Drill water : 100cbm/hr @ 90m head
Flowmeter : 01 unit fuel, 01 unit water
Liquid mud : 150cbm/hr @ 60m head
Brine : 150cbm/hr @ 60m head
Cement in bulk : 60cbm/hr at 80m

Performance :
Consumption (approx) : 14 tons/day at 13.0 knots (max speed)
Econ. speed : 11.0t/day at 11 knots (service speed)

Accomodation :
16 persons
Officers and crew 12 person
Pax : 2 x single and 1 x 2 men cabins
Hospital : 2 persons
1 x galley
1 x mess room
Seating capacity : 20 persons, fully air-conditioned

Anchor handling equipment :
Tugger winch : 1 x 10 tons SWL, Hydr. Brattvaag
Towing pins : 2 x Karm Fork
Shark Jaw : 2 x Karm Fork
Capstan: 2 x 10 tons SWL, Hydr. Brattvaag

Deck crane : 1.5 tons SWL
Windlass : 1 x 12.6 tons SWL, Hydr. Brattvaag double drum
Anchors : 2 x 2,460kg
Anchor chain : Port, 14 shackles Stbd 15 shackles

Navigation equipment :
1 Joystick (Ulstein)
2 radars (Decca RM 916 C)
1 gyrocompass (Sperry SR 220)
1 speed log (Galatee)
1 Echo sounder (Simrad EN)
1 Autopilot (Robertson AP 45)
1 GPS navigator (Koden KGP-911)

Communication equipment :
SP radio equipment to GMDSS A3 Standard comprising
VHF & DSC (Sailor)
MF/HF (T2130)
DSC (Skanti 3000)

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
--------------------------------------------------------------------------------
Search words(for official use only) :
4400 bhp PSV for Deepwater operations for sale
PSV UT705 for sale
4400bhp PSV for sale
4400bhp Platform Support Vessel for sale
PSV for Deepwater for Sale
UT705 for sale
4000 hp PSV for sale
-----------------------------------------------------------------------------

Platform supply vessel - UT 705 for deep water operations

ID 361

Massenza Hydraulic Drilling Rig for Sale

Worldoils Marketplace

Worldrigs ID: WR2976

Brand New Massenza Hydraulic Drilling Rig Model Mi8 for Sale
Massenza Hydraulic Drilling Rig for Sale

Description :

Used for water well research, geological findings, mineral research and
geothermal applications.

Work Methods:
Rotary drilling with direct circulation by Water, Mud, Air or Foam
Down the Hole Hammer Drilling
Auger Drilling
Core Drilling

Main Framework:
Made out of electrically welded high quality steel structural members
and tubular pieces.
N°4 hydraulic stabilizers of which two are fixed and the other two
can be manually widened for the leveling and positioning of rig,
complete with check valve and support plate.
Stabilizers dimensions 3 3/4" x 3 5/32" x 2 3/8", stroke 1 ft 3 3/4",
lifting force 26,566 lbs each.
Pre-arrangement for drill pipe box.

Control Panel Fixed:
Unified type, complete with valves, distributors, pressure gauges, diesel
engine and rig control instrumentation and controls for rig positioning.

Diesel Fuel Tank:

Fuel tank 39.6 US Gallons.

Brand New Massenza Hydraulic Drilling Rig Model Mi8 Mounted On Tracks (Crawler)

ID 2976

Worldoils Marketplace

Landing Craft Tank - 45 Meters - For Sale

ID 2682

Worldoils Marketplace

Carrier Mounted 550HP Telescopic Mast Rig For Sale

ID 2545

Worldoils Marketplace

Worldrigs ID: WR1054

Twin Screw Diesel Yacht for Sale
70m Twin Screw Diesel Yacht for Sale
2011 built Yacht for Sale

General :
Year : 2011
Classification : MCA (LY2) Compliant 100 A1 SSC YACHT (P) Mono G6 LMC UMS

Construction :
Steel Hull
Aluminium superstructure
Teak laid decks

Specifications

Dimensions :
Length O.A. : 70m (229.7ft)
Beam : 13.2m (43.3ft)
Draft : 3.4m (11.2ft)

Tonnage :
Gross : 1,642 tons
Net : 492 tons

Machinery
Main engines : 2 x Caterpillar 3516B, 2,525 kW at 1,800 rpm
Hours :
September 2011
Port 296
Stdb : 297

Gear Boxes : REINTJES Type-WAF 1143L
Shafts & Propellers : 2 x 5 Blade Rolle Propellers

Speeds & Fuel Consumptions :
Cruising speed 15 knots
Maximum speed of 16 knots
Range : 5,000 n. miles at 12 knots

Auxiliary Machinery & Electrical System
Generators :
3 x 200 kW Caterpillar C9
1 x 69 kW Caterpillar C4

Hours :
September 2011
DG#1 – 679
DG#2 – 733
DG#3 – 1,075

Electricity : 220V
Shore Power : 2 x Atlas 125KVA

Tank Capacities (approximate)
Fuel : 200,000 L (200cbm)
Water : 50,000 L
Watermakers : Idromar Model MC5 Duplex (550L/hr)
Lub oil : 3130 L
Dirty lub oil : 3330 L
Grey water : 6300 L
Black water : 6300 L

Ancillary Equipment
Steering System : Opem
Rudder angle indicator : San Giorno
Bow thruster : Naiad Marine 200hp
Stern thruster : Caterpillar C7 – Schottel JP57 RD
Stabilizers : Naiad zero speed, 4 blades

Fuel filters :
Main Engine – RACOR 100MA
Generator – SEPAR SWK 2000 5UMK

Fuel sepeartor : Alfa Laval
Oil/water separator : DVZ Type-FSU
Fire/bilge pump : 4 x Gionneschi : ACM 652 BT
Boilers : 4 x Gionneschi : 300Ltr
Sewage treatment : Hammam System – Jet Vacuum pumps
WC's : Jets
Airconditioning : Condaria
Ventilation : Condaria

Safety and Security Equipment
Safety :
3 x Sailor sart
1 x EPIRB

Alarms : Fire- Autronica, Proxy Sensors – Marine Automation

Security :
1 x Sailor LRIT System
4 x Fixed Dome Panasonic Day/Night Camera
2 x PTZ Panasonic Dome Day/Night Camera

Communication Equipment GMDSS Equipped and Certified
Satcom :
VSAT
Inmarsat c & Inmarsat Mini C
Fleet Broadband - 500
GSM

Cellular System : 2 x GSM/GPRS Interface Triban
VHF Radio Telephones :
2 x Sailor RT 6215
1 x Sailor RT 5020
1 x Jotron TR-710 (Aero VHF)
3 x Sailor HandHeld VHF

SSB Radio Telephone : 1 x Sailor Serie 5000
Telephone Exchange : Panasonic PBX 100 System

Intercom System :
Marine Automation – (Bridge, ECR, Engine Room,
Wing Stations, Aft Main Deck, Foredeck & Garage)

Video Conference System : Video Conference Station in Master Suite (Study)

Navigation Equipment
Magnetic Compass : 1 x Plath Jupiter, 180mm Celing Mounted
Gyro Compass : 1 x Plath Navigat X MK1
Automatic Pilot : 1 x Navis AP3000

Log : 1 x Ben Log Anthea Mod.48 (IMO Approved)
Echo Sounder :
1 x Skipper Mod GDS 101 (IMO Approved)
1 x FarSounder FS3DT (Fwd Looking Sonar)

Radar :
1 x Consillium Selesmar Selux T-250 ARPA 12U/6X
1 x Consilium Selesmar Selux T-250 ARPA 30U/12X

Chart Plotter :
2 x Transas TX-97 World Folio 2 (Run off one Licence 2 Screen)
1x ARCS Charts area 4

GPS : 2 x LEICA MX500
Navtex : 1 x Furuno NX7000

Other :
3 x Sailor Radar Transponder
1 x Joystick Manoeuvring System

Deck Equipment
Anchor Wnindlass : 2 x Opem Sistema ASLG 28x 380Watt
AFT Warping Capstans : 2 x Opem Sistema ATLG 50x
Ground Tackle :
2 x 700kg (approx) Volterbolt Anchor with 6 shackles of chain each

Boat Crane & Davits :
1 x Sanguineti Solas Crane 1000kg
4 x Rossi Navi custome overhead cranes. Max 750kg Single, Max 1250kg Double

Passerelle : 1 x Custom Motomar
Side Boarding Ladders : 1 x Custom Motomar
Swimming Platform : 1 x Rossi Navi Custom Hydraulic
Searchlight : 2 x Sunshine
Awning : 4 x custom by Elite (Italia)

Audio/Visual Entertainment Systems
Comprehensive inventory of audiovisual and entertainment equipment including :

Kaleidescape video on demand in all guest cabins, all guest bathrooms, main
dining room, media lounge, gym and sun deck

Kaleidescape audio on demand in all guest cabins, all guest bathrooms,
all internal and external guest areas

SKY television for Mediterranean and sufficient rack space for 2nd supplier

A/V facilities include:
103” Panasonic flatscreen television in bridge deck lounge
42” pop up flatscreen television in dining salon
2 x 42” Sanyo sun-readable televisions on sundeck

Master Suite :
42” television in Owner’s Study
50” Bang & Olufsen television, (to port with lounge area featuring chaise longues) on
extending, articulated arm to position/angle screen to suit viewer
17” television within bathroom mirror
Playstation 3 (with Blu-ray player)
Ipod docking station

Guest Cabins :
46” television on extending, articulated arm to position/angle screen to suit viewer
17” television within bathroom mirror
Playstation 3 (with Blu-ray player)
Ipod docking station

Ipad controller for a/v, lighting, air conditioning and blinds in all guest areas

Built in audio controls in all external areas

DJ decks, lighting / lasers / disco equipment / band facilities on Sundeck

Grand piano with wireless microphone in Main Salon

Office Equipment
Compters : 3 x Laptop, 1 x PC, 1 x rack mounted PC
Photocopier/Printer : 3 x printer/copier/fax

Domestic Equipment
Main Galley :
1 x Main oven- Angelo Po Combi
1 x Under Bench Oven – Angelo Po
1 x Pasta Boiler
1 x Angelo Po griddle

1 x Angelo Po Salamander
1 x Panasonic Microwave
1 x Miele Dishwasher
1 x Miele Glass washer
2 x Angelo Po fridge
3 x Miele freezer
2 x Custom walk in fridge/freezer

Laundry :
4 x Miele washing machine
4 x Miele tumble drier

Pantry :
In each pantry -
1 x SubZero wine fridge
1 x Angelo Po ice machine
I x SubZero drawer fridge
1 x Miele dishwasher

Sundeck :
1 x Vitrifrigo fridge
Selection of disco lights, lasers, speakers, DJ decks input

Main Deck Bar : 1 x Vitifrigo fridge

Spa Deck Fwd :
1 x Techimpex Grill
2 x Vitifrigo fridge

Other Equipment
Jacizzo Dip Pool : 7000 L (approx) pool
Ship's Safes : 5 in guest, 2 in owner, 1 in captains, 1 large in radio room
Barbeque : see Spa Deck fwd (above)
Gym Equipment :
Powerplate Pro5 AIRdaptive
TechnoGym Excite recline 700 exercise Bike
TechnoGym Synchro 700 cross trainer
TechnoGym Visionweb 700 running machine
TechnoGym Unica – strength trainer

Yacht has stability for 100 people on the sundeck while the pool is full.

Tenders & Watersports Equipment
Tenders :
1 x Colombo super indios 24sL (7.2m) (8 guests)
1 x Castoldi jet tender (7.1m) (12 guests)
1 x NDM rescue tender

Watersports :
2 x Yamaha VX cruiser jet skis
2 x sea-Doo explorer 2 seabobs
Selection of towed water toys
Floating bathing pool (jellyfish proof)
Waterskis, wakeboards
2 x kayaks

Accommodation
Owner :
Full width Owner’s suite is located on the main deck and is accessed through the office,
with desk, sofa, audio and video on demand. The suite has a king-size bed, dressing
table and armchair. There is also a TV lounge with 2 chaise longues and 50” Bang &
Olufsen cinema TV. The ensuite bathroom includes free standing oval marble bath
carved from a single piece of marble, vanity unit, his and hers closets / dressing rooms
and a double rainfall shower with waterfall hydro massage and separate audio and
video on demand.

Guests :
VIP is located on the bridge deck with super queen-size bed, 2 large picture windows, desk,
armchair, audio and video on demand. Bathroom with rainfall shower and separate WC.
TV audio and video as per guest cabins.

On the lower deck and accessed by circular staircase and glass lift :
4 cabins, 3 with queen-size beds and 1 with twin beds. All with writing desks, armchairs, audio
and video on demand, bathrooms with rain-shower, audio and video as per cabin, separate
WC.

Crew :
Up to 18 crew with accommodation in Captain’s cabin and 8 crew cabins

Price & terms : Please enquire using the email form below

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Twin Screw Diesel Yacht for Sale
2011 built Twin Screw Diesel Yacht
2011 built Yacht for Sale
70m Twin Screw Diesel Yacht for Sale
-------------------------------------------------------------------------------------------------------------------

Twin Screw Diesel Yacht for Sale

ID 1054

Worldoils Marketplace

This report is built using data and information sourced from proprietary databases,
primary and secondary research and in-house analysis by this team of industry experts.

Scope

- Updated information relating to all active and planned LNG terminals
- Provides historical data from 2005 to 2013, forecast to 2017
- Capacity information of all liquefaction and regasification terminals
- Provides operator information for all active and planned terminals
- Information on the top companies in the sector including business description,
strategic analysis. Key companies covered are BHP Billiton Limited, BP Plc and
Chevron Corporation
- Strategy changes, R&D projects, corporate expansions and contractions and
regulatory changes.
- Key mergers and acquisitions, partnerships, private equity investments and IPOs.

Reasons to buy

- Obtain the most up to date information available on all active and planned
liquefaction and regasification terminals in Oceania
- Identify growth segments and opportunities in the Oceania LNG industry.
- Facilitate decision making on the basis of strong historical and forecast capacity data
- Assess your competitor’s LNG assets
- Understand and respond to your competitors business structure, strategy and prospects.
- Develop strategies based on the latest operational, financial, and regulatory events.
- Do deals with an understanding of how competitors are financed,
and the mergers and partnerships that have shaped the market.
- Identify and analyze the strengths and weaknesses of the leading companies in Oceania.

Price

Single User Price : $5,000
Site License Price : $10,000
Enterprisewide Price (Global Site License) : $15,000

Disclaimer
All Rights Reserved.

No part of this publication may be reproduced, stored in a retrieval system or transmitted
in any form by any means, electronic, mechanical, photocopying, recording or otherwise,
without the prior permission of the publisher.

The facts of this report are believed to be correct at the time of publication but cannot be
guaranteed. Please note that the findings, conclusions and recommendations that the
publisher delivers will be based on information gathered in good faith from both primary
and secondary sources, whose accuracy we are not always in a position to guarantee.
As such the publisher accept no liability whatever for actions taken based on any
information that may subsequently prove to be incorrect.

To order this report, please send an email to mail@worldoils.com
-------------------------------------------------------------------------------------------------
Search words (for official use only) :
LNG Liquefaction Industry in Oceania, Australia
Oceania Planned LNG Terminals
BHP Billiton Limited, SWOT Analysis
BP p.l.c., Business Description
Profile of Chevron Corporation
Woodside Petroleum Browse Marketing Update
Drilling and Production Updates
InterOil Scales-Up PNG Operations
-------------------------------------------------------------------------------------------------

LNG Industry Outlook in Oceania, 2014 - Capacity Analysis, Forecasts and Details

ID 1609

Worldoils Marketplace

Worldrigs ID: WR357

Driltech D40K Drill Rig for sale
1991 Built Driltech D40K Drill Rig for sale

Model : D40K Drill Rig DH (Deep Hole)
Manufacturer : Driltech
Year : 1991
Condition : Used

Description :

1991 Driltech D40K Drill Rig
DH (Deep Hole) at 60,000 lbs of pullback from factory
72,000 In.-Lb. Torque @ 0 - 100 RPM
CAT 3408B Diesel Deck engine - (reman with only 1,600 hours)
1000 cfm / 350 psi Air Compressor
720' ft of (25' x 4-1/2") Drill pipe
FMC/Bean 35 gpm pump
Hammer Lubricator
Control Valves Rebuilt
No carousel
Mounted on a International Truck
Cummins NTC 350 Diesel Engine
25,200 + miles

Location : USA

Price & terms : Please enquire using the email form below

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------------------------------------
Search words(for official use only) -
Driltech D40K Drill Rig for Sale in USA
Used Drilling Rig - 1991 Built Driltech D40K
1991 Built Driltech D40K Drilling Rig for sale in USA
Drilling Rig - Driltech D40K - For Sale
Driltech Land Drilling Rig - 1991 Built - for Sale
--------------------------------------------------------------------------------------------------------------

Driltech D40K Drill Rig for Sale

ID 357

Ingersoll-Rand CM-780D Blasthole Drilling Rig for Sale

Worldoils Marketplace

Ingersoll-Rand CM-780D Blasthole Drilling Rig - For Sale

ID 2722

Refurbished Underground Scooptram and Rockbreaker

Worldoils Marketplace

Worldrigs ID: WR298

Wagner ST-3.5 Underground Scooptram and Rockbreaker
Refurbished Underground Scooptram Loader for Sale
Atlas Copco Wagner ST-3.5 Scooptram with Rockbreaker

Description :

“Refurbished” Wagner ST-3.5 Underground Scooptram and Rockbreaker
An extremely Versatile Machine, which can be used as a Rockbreaker, or
as a Scooptram Loader

1 Only “Refurbished” Wagner ST-3.5 Underground Scooptram and Rockbreaker

Unit was completely refurbished when fitted with the Rockbreaker Boom
Complete rockbreaker boom attachment (Breaker Not Included)
Includes boom and 3.5 cubic yard bucket attachments (To operate as Scooptram Loader)
Fully hydraulic joy sick operators controls
Low hour Catterpillar 3306 diesel engine

Only 342 hours on unit since rebuild

Tested and serviced Clark Series 28000 powershift transmission, as required
Tested and serviced Clark Series C-270 torque converter, as required
Tested and serviced Rockwell Axles
Tested and serviced fully enclosed (LCB) wet disc service brakes, as required
Tested and serviced spring applied hydraulic released park brakes, as required

Rebuilt ANSUL fire suppression system, as required
New Drive-shafts, as required
New 17.500-25 heavy duty slick mine tires
New or rebuilt hydraulic cylinders, as required
New Wiring, as required
New Hosing, as required
New or rebuilt pumps, as required
New Instruments and Gauges, as required
New pins and bushings, as required
Includes central lube system
Refurbished body, as required
New or refurbished fenders, as required
Cleaned and sandblasted
New paint

Approximate dimensions : 383” long x 77” wide x 65” high
Approximate weight : 38,500 Lbs. (with Rockbreaker Boom)

Inspections : See details below.
This Unit was completely refurbished when fitted with a Rockbreaker Boom and when
desired it can easily be returned for use as an LHD Scooptram Loader.
Although the Rockbreaker Hammer is not Included with the machine,
one can be supplied from an other source, at an extra cost.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------------------------------------------
Search words :
Wagner ST-3.5 Underground Scooptram and Rockbreaker
Underground Scooptram and Rockbreaker for Sale
Mining Equipment - Underground Scooptram Loader for Sale
Refurbished Underground Scooptram Loader for Sale
Underground Scooptram and Rockbreaker for Mining
Mining Equipment - Underground Scooptram and Rockbreaker
----------------------------------------------------------------------------------------------------------------------------

Wagner - Atlas Copco - ST-3.5 Scooptram with Rockbreaker - Refurbished for Sale

ID 298

Worldoils Marketplace

Worldrigs ID: WR900

Name of the Report :
The Russia Onshore Oilfield Services 2010 - 2014

Publication Date : 3 December 2010

Contents

Foreword .................15

1 Executive Summary ...........17
1.1 Market Drivers ...........18
1.2 Performance of Russian OFS in post financial crises .........19
1.3 New Technology ............21
1.4 OFS Market by Activity & Region ...........22
1.5 Equipment Markets ........... 23
1.6 Conclusions ............23

2 Russia in the Context of Global Energy Supply ..........25
2.1 Global Demand & Supply ............26
2.2 Oil Price and Exchange Rate Changes ..........28
2.3 Russian Oil Reserves ...........29
2.4 Russia: Comparison of Oil & Gas Production Forecasts.......32
2.5 Russian Oil & Gas Production ............33
2.6 Russian Production in Context ...........34

3 The Russian Oil & Gas Business .......35
3.1 The Soviet Union – Pre 1990.........36
3.2 Recent History ...........37
3.3 The Development of the Russian OFS Market ........38
3.4 Russian Oil & Gas Policy ...........39
3.5 The Domestic Landscape .............42
3.6 Domestic Drilling Activity by Operator ..........44
3.7 Russian E&P Expenditure.........46
3.8 Geographical Coverage ...........48
3.9 In-house Providers ...........51
3.10 Impact of Western OFS Providers .........52
3.11 Entry Strategies ..........53
3.12 Technology .............54

4 Technical Overview ..........55
4.1 Overview ..............56
4.2 Seismic Evaluation .........56
4.3 Drilling ..........57
4.4 Horizontal/Directional Drilling ..........58
4.5 Drilling Operations .........59
4.6 Workover Operations ..........60
4.7 Artificial Lift Technologies ...........61
4.8 ESP Technology ...........62
4.9 ESP-PMM Technology .........63
4.10 Competing Artificial Lift Technologies..........65
4.11 Capabilities of Artificial Lift Technologies .........66
4.12 EOR Overview ...........67

5 Market Participants ..........69
5.1 Key Trends.........70
5.2 Drilling and Workover ..........72
5.3 Russian Integrated Drilling Landscape ...........73
5.4 Rig Manufacture & Service ...........74
5.5 ESP Market ............75

6 Regional Production Overview ..........77
6.1 All Regions – Oil .............78
6.2 All Regions – Gas .............78
6.3 Timan-Pechora ............79
6.4 Volga-Urals ............79
6.5 Eastern Siberia ..........80
6.6 Western Siberia ..........80

7 Model Assumptions ...........81
7.1 The DW OFS & Equipment Market Model .......82
7.2 Drilling & Workover Splits ...........83
7.3 Exploration & Production Wells Drilled ........84
7.4 Active Drilling & Workover Rigs ..........85
7.5 Workover Operations & Well Depths ..........87
7.6 Wellstock & Service Split ..........88
7.7 Seismic Crews & Rig Manufacture .........89
7.8 Coping with future demand in light of an ageing onshore rig fleet ....... 90
7.9 Pricing Dynamics .............91

8 Market Forecasts ............93
8.1 OFS Market: Total ............94
8.2 OFS Market: Drilling ...........95
8.3 OFS Market: Workover ............96
8.4 OFS Market: Seismic Acquisition ..........97
8.5 OFS Market: Timan-Pechora Region .........98
8.6 OFS Market: Volga-Urals Region ...........99
8.7 OFS Market: Eastern Siberia Region ............100
8.8 OFS Market: Western Siberia Region .............101
8.9 Component Markets: Rig & Crew .............102
8.10 Component Markets: Completions ............102
8.11 Component Markets: Perforation .............103
8.12 Component Markets: Fishing & Milling ..............103
8.13 Component Markets: Bit Programme ..........104
8.14 Component Markets: Cementing ...........104
8.15 Component Markets: Logging .........105
8.16 Component Markets: Fluids .........105
8.17 Component Markets: Casing ...........106
8.18 Component Markets: Directional Drilling .............106
8.19 Component Markets: Tubing .......107
8.20 Component Markets: Fracturing .............107
8.21 Equipment Market: Drilling Rigs ..............108
8.22 Equipment Markets: Artificial Lift Equipment .............110

9 Appendix ...............111
9.1 Major operators ..................112
9.2 Selected Domestic Competitors ...........114
9.3 Selected Foreign Competitors .........117

Figures
Figure 1: Total OFS Market by Activity 2005-2014 ........22
Figure 2: Total OFS Market by Region 2005-2014 .......22
Figure 3: Selected Equipment Market by Type 2005-2014........23
Figure 4: Global Energy Demand 1965- 2009 ....... 26
Figure 5: Global Oil Supply 1930-2025 .......26
Figure 6: Global Oil Production 1930-2025 ........27
Figure 7: Global Gas Production 1930-2025 .........27
Figure 8: Oil Price (Urals) and Ruble/US$ Exchange Rate ......28
Figure 10: Oil Production Forecast 2005-2014 .......32
Figure 11: Gas Production Forecast 2005-2014 ........32
Figure 12: Russian Oil & Gas Production 1930-2020 .......33
Figure 14: Global Gas Production 1930-2020 ........34
Figure 16: Post Soviet Industry Expansion ........37
Figure 15: Development of the Russian OFS Industry ........37
Figure 17: Evolution of the Integrated Service Companies........38
Figure 18: Market Liberalisation in Russia 1991-2008 (illustrative) .......39
Figure 20: Average Capex per barrel of Oil 2003-2009 ........41
Figure 21: Russian Oil Production by Operator (000 bpd) .......42
Figure 22: Russian Oil Reserves by Operator (million barrels)......42
Figure 23: Russian Exploration Drilling by Operator (Kilometres Drilled) ......... 44
Figure 24: Russian Development Drilling by Operator ......... 45
Figure 25: Global E&P Company Spend 2005-2010 ...........46
Figure 26: Russian Upstream Capex by Select Oil Companies 2003-10 ......... 46
Figure 27: Geographical Coverage of Russian Production .........48
Figure 28: Russian OFS Competitor Classification ............49
Figure 30: Diagram of Seismic Evaluation ...........56
Figure 31: Basic Onshore Drilling Rig ..........57
Figure 32: Directional Drilling .........58
Figure 33: Basic Onshore Development Well (not to scale) ..........59
Figure 34: Workover: Basic Vertical Onshore Development Well (not to scale)........60
Figure 35: Artificial Lift Types ...........61
Figure 36: Artificial Lift Systems Comparison ..........64
Figure 37: Competing Artificial Lift Types ........66
Figure 38: Steam Flooding via Dedicated Injection Well .........67
Figure 39: CO2 Gas Injection ..........68
Figure 40: Estimate share of Overall OFS Revenues 2009 ........70
Figure 41: Service Split by Contractor Type 2005-2014 .......70
Figure 42: Russian Services Model (illustrative) .........71
Figure 43: Competitive Landscape – Drilling and Workover ........72
Figure 44: Competitive Landscape: Integrated Drilling Services .........73
Figure 46: Competitive Landscape – ESP Market ........75
Figure 47: All Regions Onshore Oil Production 2005-2014 .........78
Figure 48: All Regions Onshore Gas Production 2005-2014 ........78
Figure 49: Timan-Pechora Onshore Hydrocarbon Production 2005-2014 ....... 79
Figure 50: Volga-Urals Onshore Hydrocarbon Production 2005-2014 ............. 79
Figure 51: Eastern Siberia Onshore Hydrocarbon Production 2005-2014 ....... 80
Figure 52: Western Siberia Onshore Hydrocarbon Production 2005-2014 ...... 80
Figure 53 The DW OFS Equipment Market Model .........82
Figure 54: Drilling and Workover Cost-Splits .........83
Figure 55: E&P Wells Drilled 2005-2014 ........84
Figure 56: E&P Wells Metres Drilled 2005-2014 .........85
Figure 57: Active Drilling Rigs 2005-2014 ........85
Figure 58: Active Workover Rigs 2005-2014 .......86
Figure 59: Workover Operations 2005-2014 ..........87
Figure 60: Average Regional Well Depths ...........87
Figure 61: Russian Production Wellstock 2005-2014 .........88
Figure 62: Service Split by Contractor 2005-2014 ............88
Figure 63: Number of Active Seismic Crews 2005-2014 ........89
Figure 64: Russia Rig Newbuild Requirements 2003-2015 .......89
Figure 66: Russian Workover Price per Operation by Region 2005-2014 ....91
Figure 67: Rig Dayrates by Region 2005-2014 .........92
Figure 68: Total OFS Market by Activity 2005-2014 ...........94
Figure 69: Total OFS Market by Region 2005-2014 ........94
Figure 70: Total Drilling Market by Component 2005-2014 .......95
Figure 71: Total Drilling Market by Region 2005-2014 .........95
Figure 72: Total Workover Market by Component 2005-2014 .........96
Figure 73: Total Workover Market by Region 2005-2014 .........96
Figure 74: Total Seismic Acquisition Market by Type 2005-2014 ....... 97
Figure 75: Total Seismic Acquisition Market by Region 2005-2014 ...........97
Figure 76: OFS Market: Timan-Pechora by Component 2005-2014 ........98
Figure 77: OFS Market: Timan-Pechora by Activity 2005-2014 .........98
Figure 78: OFS Market: Volga-Urals by Component 2005-2014 ........99
Figure 79: OFS Market: Volga-Urals by Activity 2005-2014 .......99
Figure 80: OFS Market: Eastern Siberia by Component 2005-2014 .......100
Figure 81: OFS Market: Eastern Siberia by Activity 2005-2014 ......100
Figure 82: OFS Market: Western Siberia by Component 2005-2014 .......101
Figure 83: OFS Market: Western Siberia by Activity 2005-2014 .........101
Figure 84: Component Market: Rig & Crew 2005-2014 ..........102
Figure 85: Component Market: Completions 2005-2014 .......102
Figure 86: Component Market: Perforation 2005-2014 .......103
Figure 87: Component Market: Fishing & Milling 2005-2014 .......103
Figure 88: Component Market: Bit Programme 2005-2014 ........104
Figure 89: Component Market: Cementing 2005-2014 ......104
Figure 90: Component Market: Logging 2005-2014 ........105
Figure 91: Component Market: Fluids 2005-2014 .........105
Figure 92: Component Market: Casing 2005-2014 .........106
Figure 93: Component Market: Directional Drilling 2005-2014 ........106
Figure 94: Component Market: Tubing 2005-2014 ..........107
Figure 95: Component Market: Fracturing 2005-2014 .........107
Figure 96: Total Expenditure on Rig Manufacture <1250 HP ..........108
Figure 97: Topdrive Units Manufactured 2005-2014 .........109
Figure 98: Expenditure on Topdrive Units.........109
Figure 99: Equipment Market: New Artificial Lift Systems 2005-2014 ............ 110
Figure 100: Equipment Market: Replacement Artificial Lift Systems 2005-14.....110

Tables
Table 1: 2010 E&P Capex Budgets ......20
Table 2: Mineral Extraction Tax Calculation (As of 1st Jan 2009) $/bbl .....41
Table 3: All Regions Oil Production 2005-2014 .........78
Table 4: All Regions Gas Production 2005-2014 ......78
Table 5: Timan-Pechora Onshore Hydrocarbon Production 2005-2014 ....79
Table 6: Volga-Urals Onshore Hydrocarbon Production 2005-2014 ......79
Table 7: Eastern Siberia Onshore Hydrocarbon Production 2005-2014 .....80
Table 8: Western Siberia Onshore Hydrocarbon Production 2005-2014 ....80
Table 9: E&P Wells Drilled 2005-2014 ........84
Table 10: E&P Wells Thousand Metres Drilled 2005-2014 .......85
Table 11: Active Drilling Rigs 2005-2014 .....85
Table 12: Active Workover Rigs 2005-2014 .......86
Table 13: Workover Operations 2005-2014 .......87
Table 14: Russian Production Wellstock 2005-2014 ......88
Table 15: Number of Active Seismic Crews 2005-2014 ...89
Table 16: Number of Domestic Newbuild Rigs 2005-2014 ......89
Table 17: Russian Drilling Price per Metre by Region 2005-2014 .....91
Table 18: Russian Workover Price per Operation by Region 2005-2014 .....91
Table 19: Rig Dayrates by Region 2005-2014 ......92
Table 20: Average Metres drilled per Active Drilling Rig 2005-2014 .....92
Table 21: Total OFS Market by Activity 2005-2014 .....94
Table 22: Total OFS Market by Region 2005-2014 .....94
Table 23: Total Drilling Market by Component 2005-2014 .....95
Table 24: Total Drilling Market by Region 2005-2014 .......95
Table 25: Total Workover Market by Component 2005-2014 ....96
Table 26: Total Workover Market by Region 2005-2014 .......96
Table 27: Total Seismic Acquisition Market by Type 2005-2014 .....97
Table 28: Total Seismic Acquisition Market by Region 2005-2014 ......97
Table 29: OFS Market: Timan Pechora 2005-2014 .......98
Table 30: OFS Market: Volga-Urals 2005-2014 .......99
Table 31: OFS Market: Eastern Siberia 2005-2014 ......100
Table 32: OFS Market: Western Siberia 2005-2014 .......101
Table 33: Component Market: Rig & Crew 2005-2014 .......102
Table 34: Component Market: Completions 2005-2014 ......102
Table 35: Component Market: Perforation 2005-2014 ......103
Table 36: Component Market: Fishing & Milling 2005-2014 .....103
Table 37: Component Market: Bit Programme 2005-2014 ......104
Table 38: Component Market: Cementing 2005-2014 ......104
Table 39: Component Market: Logging 2005-2014 ......105
Table 40: Component Market: Fluids 2005-2014 .....105
Table 41: Component Market: Casing 2005-2014 .....106
Table 42: Component Market: Directional Drilling 2005-2014 ......106
Table 43: Component Market: Tubing 2005-2014 .......107
Table 44: Component Market: Fracturing 2005-2014 ........107
Table 45: Equipment Markets: Domestic Drilling Rig Manufacture 2005-14 .. 108
Table 46: Equipment Markets: Drilling Rig Service Market 2005-14 .....108
Table 47: Topdrive Units Manufactured 2005-2014 .....109
Table 48: Expenditure on Topdrive Units 2005-2014 .......109
Table 49: Equipment Market: New Artificial Lift Systems 2005-2014 .....10
Table 50: Equipment Market: Replacement Artificial Lift Systems 2005-2014.....110

2 Russia in the Context of Global Energy Supply

2.1 Global Demand & Supply
Growing Global Energy Demand
Global energy demand is the underlying driver for onshore and offshore energy
production levels. As has been acutely demonstrated in recent years, both growth
and contraction of energy consumption affect production. Despite renewable energy
initiatives and planned nuclear development, for the medium term, global demand is
centred on hydrocarbons (specifically oil & gas). In the long term, the trend towards
increasing energy consumption is clear. Global annual energy consumption has more
than tripled over the past fifty years, driven mainly by demand growth in the developing
economies. Inversely, 2008 saw primary energy consumption decrease in a number of
countries because of the global financial crisis.

Due to China’s rapid development since 1991, Asia’s primary energy consumption has
grown at a rate that has eclipsed all other users. Over the period 2000-2009, Asia’s
primary energy consumption had a CAGR of 13.1% – compared to -1.1% and 0.9% in
the North America and the FSU (Former Soviet Union) & Eastern Europe respectively –
and reached 80.5mmboed in 2009.

According to the IEA, China became the world’s largest energy consumer in 2009 at
16.6 billion boe, with the US consuming 15.8 billion boe. Chinese energy consumption in
2009 was more than double that of 2000, when it totalled 8.1 billion boe, while US
consumption was lower than in 2000, at a total of 15.8 billion boe. The opposing trends
in Chinese and US energy consumption are a reflection of how differently the two
economies faired during the global economic recession.

Oil Supply Pressures
In 2010 non-OPEC oil supply was forecast to increase by 0.7mmbpd, with the US, Brazil
and Russia driving the growth. However, production is forecast to fall by 1.7mmbpd in
2011, due to slow economic growth, reduced production in Russia and declining North
Sea production. Should the forecast for 2011 be accurate, it would be only the third time
in the last 15 years that non-OPEC supplies had failed to grow year-on-year. OPEC
crude oil production increased by 0.3mmbpd in 2010, and is predicted to increase by
0.5mmbpd in 2011. This growth reflects a growing demand for energy following the
global economic recession. Despite this growth, 2010 production levels are yet to return
to the levels achieved before the global downturn.
EIA projects world oil consumption growth will be 1.6mmbpd in 2010. For 2011 the
consumption growth forecast has been reduced to 1.4mmbpd, reflecting lower Gross
Domestic Produce (GDP) estimates in major economies.

Far East – Sakhalin – the Sakhalin basin is built up of six regions, the first of which is
already under production. Sakhalin II came on-stream in 2009 and on May 17 2010
Sakhalin Energy delivered the first cargo of Sakhalin LNG to Japanese customer Tohoku
Electric. Production from all regions in the basin should increase over the next decade
depending on the amount of investment into the region. As a prospective area, this oil
basin is just about completely explored and it is unlikely any new significant discoveries
will be made there in the future. Disagreement exists over oil reserve estimates for
Sakhalin, with totals estimated to be between 2 billion bbls and 14 billion bbls (although
natural gas reserves are widely estimated at 80tcf).9

Western Siberia – the majority of Russia’s production increases over the past decade
have come from this region; the basin accounts for over 64% of the country’s oil
production. However, following a production spike in 2008, production is predicted to
decline annually. A large proportion of production is associated with the huge Samotlor
field, which is the largest oilfield in Russia and the sixth largest in the world. Although it
is now in decline, TNK-BP will spend $4.6 billion between 2010 and 2014 on seismic and
3D surveying, to find new oil pools in Samoltor. ESPs, which are in over 90% of oil wells
in Western Siberia, continue to play a large part in optimising production from the region
– TNK-BP estimate a possible 38% recovery factor (currently 25%) in the future. As the
vast basin is isolated, a lot of infrastructure is needed to produce new fields.

Volga-Urals – the most mature Russian basin with very few new developments on the
horizon. The largest field, Romashkino, is now in decline. Major operators such as TNKBP
are pushing Enhanced Oil Recovery (EOR) techniques to maximise oil production
from the declining region.

3.4 Russian Oil & Gas Policy

In 1992 under the guidance of President Yeltsin, the role of energy in Russian politics
was to rebuild and revitalise a post Cold War economy; this led to multibillion dollar
deals with western majors, such as Shell and BP, and the opening up of Russian
resources to the West to stimulate an underinvested nationalistic sector.
In recent years Russian energy policy has been one of nationalisation, where state
owned companies Rosneft and Gazprom influence much of the energy landscape. This
consolidation does not only affect Western majors, such as Shell or BP, but also nonstate
owned Russian companies.

According to the Index of Economic Freedom, investment freedom in Russia has
decreased dramatically over the last 15 years, with the country scoring only 25 of 100
(down from 70 in 1995) – the third lowest in Europe, ahead of Belarus and Ukraine. In
recent years the government has increased levels of intervention in the energy sector,
while corruption is high and financial freedom has been curtailed. Russia is ranked 143rd
out of 179 countries for overall economic freedom, and it is ranked 147th out of 179 by
Transparency International for corruption levels.11

In July 2008 the government introduced a new law entitled “On the Procedure for
Foreign Investment in Companies Strategically Important for the Defense and National
Security of the Russian Federation”. The law covers 42 ‘strategic’ sectors in which
purchases of controlling interests by foreign companies must be pre-approved by the
government, including hydrocarbon exploration and energy production. The energy
sector is further covered by laws under which the government handpicks companies to
develop reserves that are classed as “strategic” (those which are located on the
continental shelf or are over 513mmboe or 50Bcm of gas in size). This new law has
recently affected hydrocarbon developments in Eastern Siberia, Timan-Pechora, and will
have an impact upon exploration and production in the offshore Arctic oil and gas fields.

However, the government is now set to amend the legal regime in January 2011 to allow
foreign firms to develop Russia’s continental shelf and offshore reserves. Following a
review of offshore development, the government has decided that domestic companies
alone will not be sufficient in exploiting the vast offshore reserves. Currently only stateowned
Gazprom and Rosneft are able to develop offshore reserves. It is not yet known
if the amendment will affect the strategic laws covering onshore development and
foreign involvement.

There are also political and financial shortcomings surrounding Russian energy policies
due to Moscow’s refusal to ratify the Energy Charter Treaty (despite being a signatory).
Should the treaty be ratified, internal energy policies would undergo convergence
towards a standardised western (and EU-wide) policy model that covers many areas
such as network unbundling, export tariffs, investment protection, and dispute arbitration.

4.4 Horizontal/Directional Drilling

Horizontal drilling and directional drilling have enabled energy companies to maximise
the volume of gas that is being produced from reservoirs. Reserves that were previously
deemed to have too low flow rates due to their thickness are now able to produce
greater volumes of gas. Horizontal drilling was first pioneered during the 1930s, while
directional drilling began during the 1950s. Modern technological developments of the
processes and economic viability have resulted in their widespread commercial use in
North America.

Horizontal drilling is the process of drilling a well that begins as a standard vertical linear
bore for a certain depth, before arcing, turning or becoming horizontal and entering into
a gas reservoir, where the bore continues at that angle. Most gas (and oil) reservoirs
have a greater horizontal dimension than vertical thickness. Therefore, the number of
productive reservoirs was limited. Horizontal and directional drilling means the wellbore
can be extended for a great distance horizontally through the gas reservoir. A greater
area of the reservoir and greater volume of gas is therefore exposed to the wellbore than
if a traditional vertical wellbore was being used. Horizontal drilling is estimated to
produce between two and seven times more gas from a reservoir than vertical drilling.

While horizontal drilling enables extraction of gas from reservoirs with reduced
thickness, directional drilling provides the technology for wellbores to be drilled in a
manner relevant to the physical characteristics of the rock formation above the reservoir.
Directional drilling allows for a deviation in drilling trajectory from the vertical line towards
a predetermined target area of shale rock (known as the ‘sweet spot’), where potential
gas flow and permeability are at highest.

The drilling techniques also provide a means of avoiding subsurface obstacles or those
on the surface, such as urban areas, bodies of water and environmentally protected
areas of land. For example, the onshore oil production facility at Wytch Farm in Southern
England, the Al Shaheen field in Qatar and the Chayvo field, Sakhalin in Russia all have
directionally drilled wells that extend out under the sea for over 10km.

Horizontal and directional drilling allows advanced hydraulic fracturing to occur. The
hydraulic fracturing process is key to unconventional gas development and extraction.
For the process to be effective, the wellbore must pass throughout the length of the gas
reservoir, which is something horizontal and directional drilling provides. Directional
drilling is done with rotary steerable to allow steering while rotating – creating smoother,
more efficient boreholes. Drilling three horizontal wells in a reservoir may produce the
same volume of gas as drilling 20 vertical wells. The FSU is estimated to have shale gas
reserves of as high as 11,880mmboe (as well as substantial coal-bed methane
deposits). Although there is no shale gas production yet, directional and horizontal
drilling will allow such gas to be extracted. It will also increase reservoir accessibility and
lengthen the production lifetime of mature fields.

7.2 Drilling & Workover Splits

In order to separate the oilfield services market into its individual components, each
drilling and workover operation has been split into a variety of cost centres, based on
different proportions for each region as identified through market research and
discussions with industry experts. In reality, every operation differs in its makeup, but we
believe the proportions we have used in calculating the Russian market result in
accurate figures. There may be additional cost centres for each type of operation, but as
these are of low value they have been incorporated into “other” costs.

Price for this report :
For Hardcopy or PDF Unit (Price £ UK) : £12,600

Disclaimer
All Rights Reserved.

By purchasing this document, your organisation agrees that it will not copy or allow to be
copied in part or whole or otherwise circulated in any form any of the contents without
the written permission of the publishers. Additional copies of this study may be purchased
at a specially discounted rate.

The information contained in this document is believed to be accurate, but no representation
or warranty, express or implied, is made by the publisher as to the completeness, accuracy
or fairness of any information contained in it and we do not accept any responsibility in
relation to such information whether fact, opinion or conclusion that the reader may draw.
The views expressed are those of the individual authors and do not necessarily represent
those of the publishers.

To order this report, please send an email to mail@worldoils.com

----------------------------------------------------------------------------
Search words (for official use only) :
E&P Wells Drilled 2005-2014
Russian Oil & Gas Policy
Western Siberia Onshore Hydrocarbon Production 2005-2014
The Russia Onshore Oilfield Services 2010 - 2014
2010 E&P Capex Budgets
The Russian Oil & Gas Business
Global Demand & Supply
Horizontal/Directional Drilling
Drilling & Workover Splits
---------------------------------------------------------------------------

The Russian Onshore Oilfield Services 2010 - 2014 - Report

ID 900

Worldoils Marketplace

Worldrigs ID: WR861

Landing Craft for sale
Landing Craft 500Ton For sale
Pax/Car Ferry for sale

Description

Type : Landing Craft day pax/car Ferry (open type)
DWT : 550tons
Dimensions : 61m x 15,21m Clear deck space 55m x 13.7)
Built : 1975 Greece / rebuilt 1986

GRT/NRT : 397tons / 123 tons
Engines : Caterpillar D343 2 x 375hp
Speed : 9 knots

Navaids : According to class
Car capacity : 90 European type cars
Pax capacity : 200 pax

Last dry dock 07/2011

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
----------------------------------------------------------
Search words(for official use only) -
Landing Craft for sale
500Ton Landing Craft For sale
Landing Craft For Sale in Medittereanean
550Ton Landing Craft For Sale
Landing Craft For Sale
Landing Craft For sale in Europe
-----------------------------------------------------------

Landing Craft - 550Ton - For Sale

ID 861

Worldoils Marketplace

Worldrigs ID: WR813

Kyle 12K Drilling Rig for Sale
Used 1996 built Drilling Rig for Sale

Model : 12K Drill Rig
Manufacturer : Kyle
Year : 1996
Condition : Used

Description :

1996 Kyle 12K Hydro-Fracturing truck
Kyle 12K Hydro-Frac Unit
12k hoist
Twin pump 250 GPM
Pump will go to 3000 PSI
Baski Fracker
1200 ft. of 2" Schedule 120 Frac pipe
All elevators and tools included, everything needed to frac
Mounted on 1996 Ford F650 truck
p/b Cummins 5.71 diesel engine
Cummins diesel was replaced at 86,000 miles
5 speed transmission with 2 speed rear
Also available and can be included at extra cost : 1970 Peterbilt with tank

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Kyle 12K Drilling Rig for Sale
Used 1996 built Kyle 12K Drill Rig for Sale
Drilling Rig for Sale in USA
Kyle 12K Drilling Rig 1996 Built for Sale
Drill Rig Kyle for Sale in USA
1996 built Kyle 12K Drill Rig
---------------------------------------------------------------------------------------------------------

Kyle 12K - Drilling Rig for Sale 1996 Built

ID 813

Worldoils Marketplace

Worldrigs ID: WR932

Day/Pax Efpatoria type boat for Sale
1994 built Day/Pax Boat for sale
Day/Pax Vessel For sale
Used Efpatoria type vessel for sale - 1994 built
Day Passenger Efpatoria type Vessel

Specifications

Built : 1994
Efpatoria Type

LOA : 40,15m
Beam : 7m
Hull : Steel
Accommodation : Aluminium
GRT/NRT : 181/88

M/E : 3 X 550bhp
Cruising Speed : 16kn
2 Gens
Consumption : 250ltrs/hr

Pax cap. : 220
Navaids 2 radar, GMDSS A2, NAVTEX, SARP,@ EPIRB, GPS
Last DD & SS : 06/2011

Vessel ideal for daily cruises

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
-----------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Day/Pax Efpatoria type boat for sale
Efpatoria Type Vessel for Sale - 1994 built
1994 Built Da/Pax Boat For sale
220 Pax Capacity Vessel for Sale
Used Day Passenger Efpatoria type Vessel
Day/Pax Boat for Sale
------------------------------------------------------------------------------------------------------------

Day/Pax Efpatoria type boat for sale

ID 932

Worldoils Marketplace

Worldrigs ID: WR1482

Ready Mobile Trailers
Used Emergency Trailer offices
Mobile Trailer Command Offices

Description :

(7) 2000 Medicoach (Mobile Workspace)
48’ X 96” Air Assist
Side walls are removable. Units are designed to make double, triple wide etc.
Built on a 48’X 96” Fruehauf Flat Beds
(4) Roadside units, (2) Center units (no door or windows), (1) Curbside
Aluminum Roof
Roll door
Fixed tandem
LR 24.5 Tires (New Virgin)
100% Brakes
Refurbished 2012 (New tires, brakes, Hydraulic lines, paint)
98” Interior Height
Carpeted floors and walls
60” King Pin setting
Climate Controlled (2) 5 ton BARD HVAC units each

Power Gear off highway hydraulic stabilizing system.
(Used to connect the units together)
(2) Personnel entry doors (Keyless Entry)
(4) windows each (Curbside & Roadside)
(2) Sets of OSHA compliant stairs (Curb & Road)
(3) Belly Boxes both sides (Curb & Road)
(1) Tool Box each (Center units)

Load Air System
First Alert Security System
Scorpio Fire Suppression System
6000Series Electronic Steam Humidifier
(1) Commercial Wheelchair lift
Workspace up to (20) workstations.
Interior Lighting
Exterior Security lighting
Sub floor storage space (Climate controlled for electronics)

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------------------
Search words(for official use only) -
Disaster Relief Trailers
Readily available Emergency relief Trailer containers
Used Mobile Workspace
Ready Mobile Work Trailers
Emergency Work trailers
---------------------------------------------------------------------------------------------------------------------

Used Office Trailers for Sale

ID 1482

Worldoils Marketplace

Worldrigs ID: WR76

3300Ton Revolving Floating Crane Barge for Sale
Floating Crane Barge for Sale

Description :

Max Fixed lifting capacity : 3,300Tons
Max revolving lifting capacity : 2,600 Tons
Built in 2011
Length overall : 156m
Breadth(moulded) : 45m
Depth (moulded) : 13.5m

Operating draft : 7-12m
Full load displacement : 59,000MT
Ballast capacity : 35,000MT
Fuel oil capacity : 4,050MT
Fresh water : 2,800MT

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------
Search words (for official use only) :
3000Ton crane barge for sale
Floating Crane for Sale in Asia
3300Ton Revolving Floating Crane in Asia
Floating Crane - 3000 Ton - For Sale
3300Ton Floating Crane for sale
----------------------------------------------------------------------------------------

Fully Revolving Floating Crane Barge - 3300Ton

ID 76

Worldoils Marketplace

2003 Built PSV for Sale

ID 2798

Global Planned Oil and Chemicals Storage Industry

Worldoils Marketplace

No part of this publication may be reproduced, stored in a retrieval system or transmitted
in any form by any means, electronic, mechanical, photocopying, recording or otherwise,
without the prior permission of the publisher.

The facts of this report are believed to be correct at the time of publication but cannot be
guaranteed. Please note that the findings, conclusions and recommendations that the
publisher delivers will be based on information gathered in good faith from both primary
and secondary sources, whose accuracy we are not always in a position to guarantee.
As such the publisher accept no liability whatever for actions taken based on any
information that may subsequently prove to be incorrect.

To order this report, please send an email to mail@worldoils.com
--------------------------------------------------------------------------------------------------
Search words (for official use only) :
Global Planned Oil and Chemicals Storage Industry
Asia Planned Oil and Chemicals Storage Industry
Oiltanking GmbH, SWOT Analysis
Profile of China Petroleum & Chemical Corporation
TransCanada Corporation, Business Description
Strategy and Business Expansion
Hess Plans To Sell Three Terminals In New Jersey
Central America Planned Oil and Chemicals Storage Industry
---------------------------------------------------------------------------------------------------

Global Planned Oil and Chemicals Storage Industry, 2014 - Investment Opportunities, Analysis

ID 1629

Worldoils Marketplace

274FT Well Stimulation Vessel for Sale

ID 2802

Worldoils Marketplace

Worldrigs ID: WR970

A60 Zone 1 Containers for Sale
DNV Approved A60 Zone Containers for Sale
A60 Accomodation Module Containers
Offshore Module Containers for Sale

40' container providing sleeping facilities for 8 persons with external toilet/shower facilities

Description :

- Modules for 10, 40, 80 or more persons :
- Container modules are built to standard footprints
- A60 Zone fire rated
- Approved according to DNV or Germanische Lloyd
- Fire and gas detection system with uplink to master system
- Heating, ventilation and cooling
- Fire dampers
- CSC approved for transportation on land
- Two- or three floor buildings with internal staircases
- Modules in high integrity steel structure

For price & terms : Please enquire using the email form below.

------------------------------------------------------------------------------------------------
Search terms (for official use only) :
A60 Zone 1 Containers for Sale
40' Container Modules for Sale
A60 Accomodation Module Containers
Offshore Container Modules for Sale
Germanische Lloyd Approved A60 Zone Containers for Sale
Containerized Modules - A60
Onshore Module Containers for Sale
----------------------------------------------------------------------------------------------

A60 Zone 1 Containers for Sale - DNV Approved

ID 970

Worldoils Marketplace

Worldrigs ID: WR2880

240FT Offshore Supply Vessel for Sale

Offshore Supply Vessel - 1999 Built - For Sale

Description :

General
Vessel Type : Offshore Supply Vessel
Year Built : 1999
Classification : ABS, USCG, SOLAS, MARPOL

Dimensions
Dimensions : 240 ft X 56 ft X 21 ft (73.15 m X 17.07 m X 6.4m)
Draft (Lightship) : 6 ft. 6 in. (1.98 m)
Draft (Loadline) : 18 ft (5.49 m)
Clear Deck : 165 ft x 46 ft (50.29 m x 14.02 m)
Cargo Deck Area : 7,672 sq. ft. (712.75 sq. m)
Deck Cargo Capacity : 1,750 LT (1,778.08 MT)
Deadweight Tonnage : 3,234 LT (3,285.9 MT)

Capacities
Fuel Oil : 309,433.5 gals. (1,171.33 cu. m)
Ballast : 209,972.2 gals. (794.83 cu. m)
Potable Water : 24,031.6 gals. (90.97 cu. m)
Dry Bulk : 8,106.4 cu. ft. @ 80 psi (229.55 cu. m @ 5.5bars)
Liquid Mud : 6,063 barrels (963.94 cu. m)

Machinery
Main Engines : Two (2) 3516 CAT Diesels, 3,200 BHP
Bow Thrusters : One (1) 340 HP CP Tunnel
Bow Thrusters : One (1) 1,280 HP Dropdown
Stern Thrusters : Two (2) Ulstein 1350 Azimuthing, 1,600 HP
Speed : 14.2 knots
Generators : Two (2) x 500 kW
Generators : One (1) x 170 kW

Special Features
Tuggers : Two (2) x 4 Tons
Ship Motion : Two (2) Passive Type Anti-Roll Tanks
Ship Motion : Bilge Keels
Positioning : DP-2
Cranes : One (1) 3,100 lb SWL Hydraulic Deck Crane
Firefighting : Two (2) x 8,000 GPM Monitors

Life Saving Equipment
Life Rafts : Two (2) X 10-Man Inflatable Life Rafts
Life Rafts : Four (4) x 25-Man Inflatable Life Rafts
Rescue Boat/Craft : One (1) X SOLAS Rescue Boat
Other gear as required by authorities

Electronics
Electronics Package :
Sailor R-501 2182KHZ Watchkeeper Receiver
Young Wind Tracker
NAVTEXNCR-300A Receiver
Seacall 7000 MF/HF DC Watch Receiver
JUE-75C
NDZ-127 CInmarsat Data Terminal
Seator 3000 GMDSS
Two (2) Furuno FR-1510 Mark-2 Radars
Furuno FCV-667 Depth Sounder
Two (2) Sea F156 VHF/FM Radios
Raytheon NAV/398 GPS/Loran
Two (2) Seacall F100 VHF DCS Controllers
NECODE DSC 1000
Kongsberg Simrad STS-01 Autopilot
MarineTechnologies Bridge Mate Dynamic Positioning System
MT V-Sat

Accommodations : 29

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------
Search words (for official use only) :
Used OSV - 240ft - for Sale
ABS Class Offshore Supply Vessel for Sale
1999 Built OSV for Sale
73.15M OSV for Sale
14.2 Knots Offshore Supply Vessel for Sale
---------------------------------------------------------------------------

Offshore Supply Vessel - 1999 Built - For Sale

ID 2880

Worldoils Marketplace

Worldrigs ID: WR1483

OIME 2000 Drilling Rig for Sale
2000 HP SCR Drill Rig for Sale
Drilling Rig with Newly built Components

Description

Drawworks

OIME 2000 HP drawworks, 42VC1200 high drum clutch and 38VC 1200 low

drum clutch, Driven by two (2) GE 752 type series wound DC traction motors

with 10 hp blowers. Complete with Wichita 336 water or glycol cooled
auxiliary brake.

Mast

DSI 150’ beam leg with 1,000,000 lb hook load capacity and mast assembly stand.

Crown Block - 1 x 60” fabricated steel fast line sheave and 6 x 60” working sheaves.

Sheaves grooved for 1-3/8” line. Geronimo line is 9/16” line 1.5 times derrick height in

length. Drill pipe capacity is 242 stands of 5” DP and 10 stands of 9” DC’s. One mast

assembly stand and two stands to elevate the blocks are included.

Deadline Anchor - 100,000 lb deadline anchor, Deadline is on off-driller’s side

Substructure

DSI 30' box-on-box with a casing capacity of 1,000,000 lbs and a setback capacity of

600,000 lbs., Includes a complete set of hand rails and wind walls 8’ high.

V-Door & Catwalk

5’ wide x 18” high x 50’ long catwalk, Cable trays to accommodate air, fuel, water, and

electrical cables.

Drilling Line

1-3/8” drilling line

Drilling Line Spooler - Air powered drill line spooler is designed to accommodate

7500’ steel drill line spool.

Generator Unit

3 Caterpillar 3512C diesel Tier II EPA certified diesel engines, turbocharged

and aftercooled, rated at 1476 hp each @ 1200 rpm with complete instrumentation

packages and automatic shut down systems. Started by 60 to 150 psi airstarters.

Cooled by Mustang conventional style split core radiators (56 square feet) with 2

circuits for engine coolant and aftercooler. Engines each drive a Cat SR4B,

1750 KVA, 2 bearing, 1225 KW, 867 frame, 0.7 PF, 600 volt, 60 cycle generator

complete with stator RTD’s, space heater, bus bar and cable access box.

SCR Unit

Omron 4x4 SCR system powered by 3 Caterpillar 3512C diesel engines with a

spare bay for an additional generator. The SCR House is 10‘ wide x 40’ long x 10’-6” high,
with a plug panel and air conditioning system. System includes 1 x 1000 KVA,
600:480 volt, 3-phase motor control center, a 480 volt motor control center to operate
the auxiliary equipment, 1 x 150 KVA, 600:120Y208 volt, All new external cable
trays to accomodate air, fuel, water, and electrical cables.

Traveling Equipment

Oilwell 500-ton traveling block with (6) sheaves grooved for 1

3/8” line and National 500 ton hook

Rotary Equipment

Lanzou 37 - 1/2” 500 ton capacity rotary table, chain driven from drawworks,

With anti-slip floor matting

Swivel - EMSCO LB-500, with a 500 ton rating.

Mud System

Mud Pumps - (2) Weatherford MP-16 single acting triplex slush pump,

1,600 HP. Each powered by 2 x GE 752 DC traction motors. Charged by

6 x 5 pumps each powered by a 50 hp, 1200 rpm, 480 volt, 3 phase AC motor.

Each pump equipped with Weatherford 20 gal discharge pulsation dampener.

Mud Tanks - 2) Tanks with 1,040 bbls total capacity. Pits have 5/16”

crimped walls and 6” square tubing rims. Each tank compartment has a

mud gun and equalizer valves. A 16” x 18” trough runs the length of each

tank. The shaker tank has four compartments with 520 bbl capacity with 2

Derrick 503 High G shakers, O’Drill/MCM 2 cone desander and O’Drill/MCM

12 cone desilter. The shaker tank has 2 each 8” x 6”centrifugal pumps with

mechanical seals driven by 75 hp, 1800 rpm, 480 volt, 3 phase AC motors

and includes a mud / gas separator. The 3 compartment suction tank includes

a 60 bbl pill pit. There is a 10 hp agitator in the last compartment of the shaker

tank and each compartment of the suction tank. The mud mixing hopper can

suck or discharge to any compartment in the suction tank. High pressure

system is 4”, 5000 psi.

Auxiliary Equipment Storage :

Air Compressors—Service Air - 2 Gardner-Denver HRA2512S compressors

each powered by a 25 hp, 480 volt, 3 phase AC motor. Each complete with a

120 gallon receiver. Dried and cooled with a Gardner Denver RNC-125

refrigerated air dryer.

Air Compressor—Cold Start - Gardner Denver HDR5-3 self contained

cold start unit powered by a Lombardini 9 hp diesel engine. Capacity is

16.5 cfm at 125 psig.

Dog House - 8’ wide x 34’ long x 8’ high doghouse with knowledge box and

workbench.

Change House - One 10’ wide x 38’ long x 8’ tall parts and change house

with lockers and shelving. There is also a small parts storage area on the end.

Fuel Tank- One 8’ diameter x 30’ long fuel tank with 2 Roper AMD-27 gear

pumpsdriven by 3 hp, 1800 rpm, 480 volt, 3 phase, explosion proof motors.

Water Tank - One 10’-6” diameter x 32’ long water tank including 2 3” x 2”

centrifugals. Each pump is powered by a 25 hp , 1800 rpm, 480 volt,

3 phase AC motor.

Accumulator Unit and Control

(5) station Consolidated Pressure Controls system including annular

pressure control with 220 gallon capacity. Unit includes UET25-B triplex

pumps with 1.25” plungers and 2 Speed-Flo air pumps. System includes

a 150’ air umbilical attached to a remote control panel on the rig floor.

Safety and Floor Valves

Subs for the Handling Equipment - Handling tools, slips and

elevators to suit tubular inventory, Bit Subs, Cross over subs,

Lifting subs, Pipe Rack

Drilling Floor Equipment – Slips, Elevators, Tongs, Spinning Wrench:

Catheads - Type 37 AK Foster make-up cathead and Type 24AK break

out cathead.

Wire Line Unit - Five star surveyor wire line unit with 20 HP, 1,800 RPM

motor with one line guide & 20,000’ of .092 wire line.

Dog Collar Safety Clamps

Kelly Spinner - 5-1/4” Hex Kelly x 46’ length with Varco HDP Bushings

Additional Equipment Included:

Spare parts:

Transformers - 3-phase, 60 cycle lighting transformer and a 42 circuit,

120Y208 volt lighting panel

Junk Basket:

Forklift - Caterpillar 950 or similar forklift for jungle and rainy/muddy operations

Manlift - 40’ reach man-lift for safe operations at height.

Winches - Ram-Winch-Houston TX, Model: AG74352

Container - Spare parts

Miscellaneous

All components are mounted on 3 runner oil field skids with loading hitches designed

for tail boarding. All new cable trays build to accommodate air, fuel, water and

electrical cables. Walking areas are decked with ¼” plate and 3/8” plate around

the rotary table

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
OIME 2000 Land Drill Rig for Sale
2000hp SCR Drilling Rig for Sale in USA
SCR Drill Rig for Sale
Land Drill Rig with 2007 Built Components
OIME Drilling Rig 2000 hp for Sale
Good Condition Land Drill Rig in USA
OIME 2000 SCR Drill Rig for Sale
---------------------------------------------------------------------------------------------------------------

OIME 2000 Land Drilling Rig - 2000 hp for Sale

ID 1483

Worldoils Marketplace

Worldrigs ID: WR227

Offshore Tug/Supply Vessel for Sale
OSV For Sale

General
Built : 1983
Classification : Lloyd's: +100A, +E1 tug/supply "Offshore Rug/Supply Vessel" LMC UMS

Cargo Capacities
Dead Weight  :
1700 tons at 5.98 m, draught (=S).
1600 tons at 5.86 m, draught (=W).
Deck cargo : 500 tons
Clear deck space : 38.5 x 11 m, total: 423.5 sqm
Deck strength :
forw. frame 45 ; 5t/sqm
aft of frame 45 ; 7t/sqm
Fuel oil : 582.0 cbm
Base oil (max)  : 263.0 cbm
Drill water : 420.0 cbm
Liquid mud/brine : 470.0 cbm (3000bbls)
Potable water : 453.0 cbm
Dry bulk
2 tanks 62.3 cbm
2 tanks 65.7 cbm
Total: 256 cbm

Machinery/Propulsion
(direct diesel drive)
Main engines :
2 MWM four-cycle Diesel engines
Type: MWM TBD 510 L8, total 9,280 BHP
Propellers : 2 C.P. propellers in fixed nozzles
Bow thruster : C.P. thruster, 680 BHP, 500 Kw, Lips, electric driven
Thrust : 10 tons
Bollard pull : 108 tons
Generators :
Two shaft generators type AEG 687 KVA
Two diesel generators type AEG 330 KVA
Power supplly :
450V - 3 phase - 60 Hz
230 - AC - 60 Hz
24V - DC
To cargodeck consumers / container plugs
1 x 450V / 3 phase / 63 Amp CEE 440V
1 x 450V / 3 phase / 25 Amp CEE 440V
Speed  : Max 15.5 knots
Fuel consumption in tons/day :
10 knots at 6.2 tons
12 knots at 12.5 tons
Rudders : 2 x "flap" type, synchronically controlled
Miscellaneous :
Sewage plant, fuel oil separator, luboil separator, Halon fire
smothering equipment in engine room, fully equipped workshop

Navigation Equipment
Joystick : AEG-Geopos
Gyro Compass : Anschutz - Standard 6
Magnetic Compass : AP Navigator Dantronik
Autopilot : Anschutz 102 834N6
Radar 1 : Decca Racal - Bridgemaster
Radar 2 : Furuno FR 1221 NS
Radio Dir. Finder : Koden KS 540 K
Navtex : J.R.C, N.C.R, 300A
GPS Navigation : J.R.C, Raystar 920
Decca Navigator : AP Dantronik
Echo Sounder : Atlas Echograph 48

Communication Equipment
Radiotel, MF/HF Transmitter : Sailor T1127L
Watchreceiver (distress) : Sailor R501
Life-boat radio  : Skanti-TRP 1
VHF 1   : Sailor RT146 Duplex
VHF 2   : Sailor RT146 Duplex
Satcom C : Capsat Thrance & Thrane 3020B
Walky Talky  : 3 x ICOM IC-M12H
VHF Comm. 2000(airplanes) : Becker Flugfunk
EPIRB : Jotron-305Mk II
Internal Comm. System : A.E.G./Phonico P-2591
Mobile phone (for network communication)
STRT : Jotron-Tronsart

Accommodation
Crew : 12 single cabins; 1 x 2 + 2 x 4 person cabins
Passengers : 10.1 x 2 + 2 x 4 per cabins
Recreation room : 1 x 16.0 sqm
Messroom : 1 x 21.0 sqm
Accomodatgion fully air conditioned/heated

Refrigerated Storage Capacity
Cold Store : 8.3 cbm at -20°C
Cooled store : 8.5 cbm at +4°C

Deck Machinery
Windlass : Hydraulic driven max. pull 16 tons
Anchors/chain : 2 x 21 shackles (32 m/m chain) + 1.5 tons anchor
Deepsea Anchor  : Drum with 1500m, 36m/m wire + 1.5 tons anchor
Capstans :  2 x hydraulic driven max pull 11 tons
Tuggers   : 2 x hydraulic driven max pull 7/11.4 tons
Towing/AH winch  : Hydraulic driven
Towing drum : capacity 1650 m of 76 mm diam wire
2 x AH drum : capacity 1000 m of 62 mm diam wire max pull 250 tons
Wildcats : Max. pull 250 tons. 3"
Crane : Electric Hydraulic SWL 2 tons 8 mtr
Storage reels :
2 hydraulic driven
capacity 1200 m of 70 mm. diam
1500 m. of 62 m. diam
length 4.0 m. diam. 1.85 m
Stopperpins :
2 hydraulic driven (remote controlled)
Make:Karmoy, ......tons SWL
Guide Pins :
2 hydraulic remote controlled pins Karmoy,
2 hydraulic romote controlled

Cargo Pumps/Discharge Rates
Exact rates are depending on discharge height to the platform and piping lay out on the platform.
Dry bulk : 2 compressors: 15sqm/hr (bar)
Barite : approx. 60 tons/hr
Bentonite : approx. 60 tons/hr
Cement : approx. 60 tons/hr
Fuel oil  : 1 x 150sqm/hr. at 75 m.l.c. (8.8bar)
Drillwater : 1 x 150sqm/hr. at 75 m.l.c. (8.8bar)
Potatble water  : 1 x 150sqm/hr. at 75 m.l.c. (8.8bar)
Liquid mud : 2 x discharge/circulation pumps.
Capacity : 80sqm/hr. at 75 head (18 bar)
Brine : 1 x 80 sqm. at 75 m.l.c.
Base oil  : 1 x 80 sqm/hr. at 75 m.l.c. (9 bar)
Couplings : Weco or Avery Hardol. 4" (   bar)

This vessel specification is given in good faith and assumed to be correct.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------
Search words :
Offshore Tug For sale
Offshore Supply Vessel For Sale
OSV vessel for sale
Offshore Tug
Offshore Supply Vessel
--------------------------------------------------------------------------

Offshore Tug Supply Vessel

ID 227

Worldoils Marketplace

Worldrigs ID: WR697

Freestanding Service rig for sale
450hp Single Freestanding Service Rig for Sale
New Single Freestanding Service Rig for Sale

Carrier :
• All welded, wide flange I-beam frame rails
• 24" wide drillers side folding steel walkways with handrails and toe guards
• Drillers side removable stairs with handrails
• Highway lighting package
• One man insulated cab with high back air ride bucket seat
• Tandem front steering axles are Meritor Easy Steer with Q Plus braking
• 20,000 lb front GAWR per axle

• Steering tires are 445/65R22.5
• Tridem rear drive axles are Meritor single-reduction with heavy duty Q Plus braking
• 25,000 lb rear GAWR per axle
• Drive tires are 11R22.5
• All axles are equipped with ABS
• Four hydraulic leveling jacks

• Work platform with folding wings on each side, removable handrails, and V-door
• 125G aluminum fuel tank
• 250G steel hydraulic tank
• One steel toolbox mounted on the carrier deck
• One 5,000 lb winch mounted on the drillers side
• Deadline anchor

Powertrain :
• Detroit Diesel, Caterpillar, or Cummins engine
• Exhaust system with spark arrestor
• Remote fuel filtration
• Air release fan hub
• Tu Flo 750 air compressor with air dryer
• 35GPM hydraulic pump
• Positive air shutdown
• Electornic control panel with diagnostics
• Allison HT750DB automatic transimission

Mast :
• 73' stiff mast, 140,000 lb hook load
• Designed and built in accordance with API specification 4F
• Folding racking paltform complete with an escape frame assembly
• Four sheave crown
• Walk around crown platform and ladder
• Rod board with tie backs and safety cables
• Mast lighting package
• 2", 5,000psi standpipe
• Weight indicator mount

Drawworks :
• Alco 450 Double Drum, 450hp drawworks
• Main Drum
- Main drum size 18 x 36
- Brake rim size 42 x 10
- Sand line capacity 53,000 lbs
• Sand Drum
- Sand drum size 13 x 39
- Brake rim size 38 x 8
- Sand line capacity 10,000ft of 9/16 line
• Safety guards and shields

Optional Equipment :
• Tridem Steering configuration
• Class II accumulator system with pneumatic controls at drillers console
• Wind walls for tubing board
• Hoisting equipment and handling tools
• Raised drillers platform
• Upgraded transmission models

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------------
Search words(for official use only) -
Freestanding Service Rig for Sale
450hp New Single Freestanding Service Rig for sale
New Single Freestanding Service Rig - 450hp
Land Rig for Sale - New 450hp Freestanding Service Rig
Workover Rigs for Sale
-------------------------------------------------------------------------------------------------------

Freestanding Service rig for sale - Newbuilt 450 hp

ID 697

Worldoils Marketplace

Worldrigs ID: WR1941

High End Combination Barges for Sale
350 persons Accomodation Barge for Sale

Description :

Dimensions (LxWxD): (2) 230’x40’x12′ Barges

High end combination barges

460′ Custom Two Unit Berthing Barge: Sleeps 350 persons,
2 full galleys, 6 Lounges, Exercise Room, Shore Power with
125kw emergency generator. Built in 1975.
Hull Material: Steel This berthing facility is up-scale and was
used to house construction workers employed by the
US Army Corp of Engineers while doing riverbank matting work
on the Mississippi River. It was re-built in 2006 by Murphy Oil Company
to house their workers after Katrina. The berthing facility is
composed of 2-230’X 40’ barges and usually operates “end to end”.
Total capacity is 350 persons.

One barge is composed of berthing spaces only and contains
4 units of 9 rooms with 3 beds/room for a total of 108 on the main
deck and 4 units of 9 rooms with 4 beds/room for a total of 144 on
the second deck. Total capacity of this barge is 252. The second
barge is composed of 32 rooms with 3 beds/room for a total of 96 on
the second deck. This barge also contains 6 lounges, 2 dining
facilities, full service galleys, a gym and laundry facilities on
the main deck.

The barges have always operated on the River and are not
ABS rated but are believed capable of being towed in open waters.
It would be feasible to move the structures to ABS rated barges if required.

We can deliver a package consisting of two barges; one is 100-man
and has a galley. The other is a 250-man barge and this has other
facilities. The barge will be useful in accommodating personnel at
work sites offshore.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Two Unit Berthing Barge for Sale
Barge with 350 persons Accomodation
1975 Built Barge for Sale
2006 Rebuilt High End Combination Barges
Two Barges for Sale
230 Length Dimension Barge for Sale
-----------------------------------------------------------------------------------------------------------------

Barges for Sale

ID 1941

Worldoils Marketplace

HT-400 Pump with 4 1/2 Inch Plungers for Sale

ID 575

Worldoils Marketplace

Worldrigs ID: WR2946

Bucyrus Erie 22W Series II Cable Tool Rig for Sale
Bucyrus Erie Cable Tool Rig for Sale

Model : 22W Series II Cable Tool Rig
Manufacturer : Bucyrus Erie
Condition : Used

Description :

Bucyrus Erie 22W Series II Cable Tool Rig - For Sale

ID 2946

Worldoils Marketplace

Worldrigs ID: WR176

5000mt dwt Bunkering Tanker
Bunker Tanker for sale
Modern Double Hull Bunkering Tanker for Sale

General
Length Overall : abt 90mtrs
Length between perpendiculars : abt 85mtrs
Extreme breadth : abt 15.5mtrs
Moulded depth : 7.80mtrs
Summer draft : 6.01mtrs
Summer Deadweight : 4626 MT

Tank Capacities
Capacity (98%) of each natural segregation with double valve (specify tanks):
Group 1: COT 1P, 1S = 798.400 cu. mtrs
Group 2: COT [ 2P, 2S ] & [ 3P,3S ] = 1182.500 + 1249.100 = 2431.600 Cu mtrs
Group3: COT 4P, 4S = 1243.200 Cu mtrs

SBT
Total capacity of SBT : 2005.2 cu.mtrs
What percentage of SDWT can vessel maintain with SBT only : 43.35%

Pumping Systems
Cargo pumps : 3 nos : Screw, self priming : (2 x 500), (1 x 300) cu.m/hr

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
---------------------------------------------------------------------------------------------------------
Search words(For official use only) -
Double Hull Bunker Tanker
Modern Bunkering Tanker for Sale
DH Bunker Tanker for Sale - 5000mt DWT
Double Hull Bunker Tanker for sale
5000mt DWT Bunkering Tanker for sale
Bunkering Tanker for Sale - Abt. 90 meters in length
-------------------------------------------------------------------------------------------------------

Double Hull Bunkering Tanker for Sale - 5000mt dwt

ID 176

Worldoils Marketplace

Worldrigs ID: WR1076

Coiled Tubing Unit for sale
Two Coiled Tubing package for sale
Used Coiled Tubing Rig

Description :

Coiled Tubing Unit Package

2001 Tandem Peterbilt (Manufactured by C-Tech). Powered by CAT C15 – 500 HP
engine w/ Eaton 18 speed transmission
- Split Reel with 1,080 m of ¾” & 1200 m of 1 1/4” CT
-330 CFM x 4 stage Hurricane Compressor (2000 psi max)
-C-Tech 35,000 lb Injector (3/4”-1 ¾” tubing range)
-18993 hours

2005 Tridem Peterbilt (Manufactured by C-Tech). Powered by CAT C15 – 500 HP
engine w/ Eaton 18 speed transmission
- 2000 m of 1 1/2” CT
-600 CFM x 5 stage Revel Compressor (2000 psi max)
-C-Tech 35,000 lb Injector (3/4”-1 ¾” tubing range)
-10831 hours
-Power Spooler
-Side Entry Unit
-Fluid Catch Tank
-2009 Dodge Ram 3500 Cummins Service Truck

These trucks are recently serviced, tooled up and ready to STAY working. Comes with all hand
tools, air tools, an assortment of coiled tubing service tools, extra chains, and elevators.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
--------------------------------------------------------------------------------------------------------
Search words (for official use only) -
CT Rigs for sale
CTU for Sale
Coiled Tubing Unit Package
2 Coiled Tubing Units for Sale
-------------------------------------------------------------------------------------------------------

Coiled Tubing Unit Package for sale

ID 1076

Non-Propelled Split Hopper Barge for Sale

Worldoils Marketplace

Worldrigs ID: WR694

Split Hopper Barge for Sale
440 cubic meters Split Hopper Barge for Sale
Non-Propelled Split Hopper Barge

General Information
Year of Built : 2011 - keel laid end 2009
Class : Turk Loydu
Notation : Pontoon +1A5 Coastal Class

Dimension and Capacities
Lenght Over All : 43.0 m
Breadht : 9.0 m
Depth : 3.5 m
Draft (loaded) : 2.7 m
Hopper Capacity : 440 m3
Lenght of Hopper : 29.0 m
Breadth of Hopper : 6.0 m

Generators
Type :
Deutz 90 BHP - Hydraulic Sunfab 120 lt (SC084 ) , Max pressure 400 bar
Standford 16 kva , Alternator driven from genset. Double pistons working

Others
Steel Tickness :
14 mm bottom of the hold
12 mm sides of the hold
10 mm keel plate
8 mm Hull and remained places

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------------------------------
Search words(for official use only) :
Split Hopper Barge For Sale
440 cubic meters - Non-Propelled Split Hopper Barge
Non-Propelled Barge for Sale
Split Hopper Barge for Sale - Non-Propelled - 2011 Built
Split Hopper Barge for Sale - 440 cubic meters
2011 built Non-Propelled Split Hopper Barge for Sale
----------------------------------------------------------------------------------------------------

Split Hopper Barge for Sale

ID 694

Worldoils Marketplace

Worldrigs ID: WR1512

Manitowoc 12000 Crawler Crane for sale
120T Manitowoc 12000 Crawler Crane for sale

Features
• 110 t (120 USt) Lift Capacity
• 397 mton-m (2,880 ft-kips) Maximum Load Moment
• 70,1 m (230 ft) Heavy-Lift Boom
• 82,3 m (270 ft) Fixed Jib on Heavy-Lift Boom
• 94,5 m (310 ft) Luffing Jib on Heavy-Lift Boom
• 247 kW (332 HP) engine
• 163 mpm (535 fpm) line speed
• 21 180 kg (46,700 lb) Maximum Line Pull
• 11 400 kg (25,100 lb) Rated Line Pull
• 10 000 kg (25,000 lb) Material Rehandling Clamshell capacity
• Fast, efficient self-assembly and disassembly
• Manitowoc Crane CARE comprehensive support

Engine
Hino P11C-UN, 6 cylinder, water-cooled diesel, direct fuel injection with
turbocharger, 247 kW (332 HP) at 2000 high-idle RPM. Maximum torque
1300 N•m (959 lb•ft) net at 1,500 rpm (SAE J 1349).

One diesel fuel tank, 400 liters (105 gallons) capacity.

Two 12 volt 136 AH capacity batteries, 24 volt system and 50 amp alternator.
All wiring harnesses and connectors are numbered for easier servicing. Machine
is equipped with individual fused branch circuits.

Controls
Full-flow hydraulic control system for constant variable pressure to front and rear
drums, boom hoist brakes and clutches. Controls respond instantly to the touch,
delivering smooth function operation.

Relief valve pressures :
Load hoist, boom hoist and propel system . . . 315kg/cm2 (4,480 psi)
Swing system . . . 280 kg/cm2, (3,980psi)
Control system . . . 80 kg/cm2 (1,140 psi)

Additional information regarding this equipment will be shown on request

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------------------
Search words(for official use only -
Manitowoc 12000 Crawler Crane for sale
120T Manitowoc 12000 Crawler Crane for sale
Crawler Crane for sale
120 Tons Crawler Crane for Sale
----------------------------------------------------------------------------

Manitowoc 12000 120tons Crawler Crane for Sale

ID 1512

Worldoils Marketplace

Worldrigs ID: WR2114

BOP Fail Safe Valves for sale

Description
4 x BOP Fail Safe Valves

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------
Search words(for official use only) :
BOP Fail Safe Valves for sale
BOP Fail Safe Valves - for Sale
-----------------------------------------------------------

BOP Fail Safe Valves for sale

ID 2114

Worldoils Marketplace

Worldrigs ID: WR2823

Model 400C Travelift for Sale
Built 2014 (but never used) Travelift for Sale

Specifications

General

Marine Travelift for Sale

ID 2823

Worldoils Marketplace

Worldrigs ID: WR558

Caterpillar CS-563E Roller for Sale
2003 Used Caterpillar CS-563E Roller

Year : 2003
Manufacturer : Caterpillar
Model : CS-563E
Condition : Used

Description
Hours : 2,338 84" smooth drum, push blade
Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
----------------------------------------------------------------------------
Search words(for official use only) -
Caterpillar CS-563E Roller for Sale
Mining Equipment Caterpillar Roller
Used Caterpillar CS-563E Roller
2003 Caterpillar CS-563E Roller for Sale
Caterpillar Roller for Sale in USA
------------------------------------------------------------------------

Caterpillar CS-563E Roller - 2003 built for Sale

ID 558

58m Offshore Support Vessel for sale - 2003 built

Worldoils Marketplace

Worldrigs ID: WR437

Offshore Support Vessel - 58m - for sale - 2003 built
OSV for sale

Specifications :
Type of Vessel : Offshore Support Vessel
Year built : 2002
Registered : 2003
GRT/NRT : 1368/410

Plying Limit : Unrestricted
Classification : American Bureau of Shipping.
Class Notation : ABS + A1 E Offshore Support Vessel *AMS* FiFi Class1
Horse Power : 2 x 2100 BHP
Cruising Speed : 12 Knots

Fuel Consumption :
Cruising Speed 650 Litres/hour
Generator 80 Litres/hour

Main Characteristics :
L.O.A : 57.50 M
Breath Moulded : 13.80 M
Depth Moulded : 5.50 M
Max Draft : 4.50 M
Deck Strength : 7 MT/sq m
Clear Deck space : Approx. 350 sq. m
Deck Cargo : 700 MT
Deadweight : 1369 Tonnes

Capacities :
Fuel Oil : 350 cu.m
Fresh Water : 200 cu.m
Drill Water : 380 cu.m
Liquid Mud : 2 x 125 cu.m
Dry Bulk : 4 x 1650 cu. ft
Foam : 11 cu.m
Detergent : 11 cu. m
Freezer : 6 cu. m
Chiller : 8 cu. m

Auxiliaries :
3 x Caterpillar 3408 C
Genset 315KW/415V/3Ph/50Hz

Pump :
2 x 1200 cbm/hr @ 11 bar cu.m. at head 30m.
Main fire pump : 1 x Allen gwynnes nimbus pump capacity of 50 cu.m at head 100 m.
Emergency fire pump : 1 x Yanmar VDP20E pump capacity 500 ltrs/min at head 30m.

Deck Machinery :
3 x 5 MT electric capstan.
1 x 8 MT @ 12 m/min electric hydraulic type c/w 2 x wildcats plus 2 x warping drums
2 x 1590 kg stockless bower anchors
Total 372 m x 34 mm U2 stud-link chain

Propulsion Machinery :
Main Engines : 2 x Caterpillar 3516 B each of 2100 BHP
Marine Gearbox : 2 x Reintjes WAF 862 L with ratio 5.50 : 1
Propulsion : 2 x Berg controllable pitch in kort nozzles
Bow Thruster : 1 x 325 KW Kawasaki KT-43 B1 (CPP) tunnel units of 5 MT thrust

Navigation & Communication Equipment :
GMDSS : Area 3
Gyro Compass : 1 x Furuno
Radar : 2 x Furuno
Echo sounder : 1 x Furuno
SART : 2 x Joltron
EPIRB : 1 x McMurdo MCM-406A
Navtax Receiver : 1 x Furuno
Autopilot : 1 x Anschuetz
Weather Fax : 1 x Furuno
Speed Log : 1 x Furuno
GPS Plotter : 1 x Furuno

Accommodation :
Fully air conditioning total 50 berth
1 x 2 berth hospital & 1 x office

Fire Fighting Equipment :
Fire Pump : 2 x 1200 cbm/hr @ 11 bar
Fire Monitor : 2 x 1200 cbu/hr @ 12 bar
Fire Extinguish system : Fixed Co2 system for engine room
Fire Hydrants and Extinguishers : As per Classification’s requirement

Life Saving Appliances :
As per SOLAS 74/78, Port of Registry and Classification’s requirements

Other Equipment
Life Rafts : 4 x 25 men
Rescue Boat : 1 x 6 men rigid rescue craft c/w davit & 25 HP outboard engine.
Manoverboard : 2 x Comet.
Deck flood light : 3 x 1000 W deck flood light.
Compressor : 1 x BA recharging compressor

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------------------------
Search words(for official use only) -
Offshore Supply Vessel For Sale
Offshore Supply Vessel For Sale in Singapore, Malaysia, Indonesia
OSV for sale in Singapore, Malaysia, Indonesia
Offshore Support Vessel OSV For Sale
---------------------------------------------------------------------------------------------------------------------------------

OSV - 58m 2003 built - for sale

ID 437

Worldoils Marketplace

Worldrigs ID: WR370

Vetco Style Risers MR6-C for sale

Have available :
12 joints of NEW Vetco MR6-C style risers are 50 foot in length.

They have 39 inch support flanges, Choke & Kill lines are 4-3/8 inch O.D. and they are
Rated for 15,000 PSI working pressure

Booster line is 4 inch O.D. and is rated for 5.000 PSI working pressure.

The main 21 inch O.D. tube has .625 wall (5/8”)

These marine riser joints will be coated with a three coat epoxy and come with a complete set of data books.

All ready to go.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------------------------------------
Search words(for official use only) :
New Vetco Style Marine Risers MR6-C for sale
Subsea Risers for Sale
Vetco Risers for sale
Marine risers for Sale
-----------------------------------------------------------------------------------------------------------

Style risers - Vetco MR6-C for sale - New

ID 370

Worldoils Marketplace

No part of this publication may be reproduced, stored in a retrieval system or transmitted
in any form by any means, electronic, mechanical, photocopying, recording or otherwise,
without the prior permission of the publisher.

The facts of this report are believed to be correct at the time of publication but cannot be
guaranteed. Please note that the findings, conclusions and recommendations that the
publisher delivers will be based on information gathered in good faith from both primary
and secondary sources, whose accuracy we are not always in a position to guarantee.
As such the publisher accept no liability whatever for actions taken based on any
information that may subsequently prove to be incorrect.

To order this report, please send an email to mail@worldoils.com
--------------------------------------------------------------------------------------------------
Search words (for official use only) :
Italy Energy Sector, Market Overview
Italy Exploration and Production Sector
Italy FSO Industry, FSO Capacity Details by Vessel
Italy Pipeline Sector, Crude Oil Pipelines
Italy Oil and Chemicals Storage Sector
Eni S.p.A., Business Description
Profile of Royal Dutch Shell plc
Northern Petroleum Plc, SWOT Analysis
----------------------------------------------------------------------------------------------

Italy Oil Markets, 2013

ID 1747

Anchor Handling Tug Supply Vessel for Sale

Worldoils Marketplace

Worldrigs ID: WR2054

Anchor Handling Tug Supply Vessel for Sale
AHTS - 2009 Built - for Sale

Particulars
Vessel Type : Anchor Handling Tug Supply
Year Built : 2009
Classification :
A1, DP-1 Towing Vessel, Offshore Support Vessel, (E), AMS

Details
Length Oerall : 58.7m
Breadth : 14.6m
GRT-NRT : 1,459/450
Deadweight : 1,350t
Depth Moulded : 5.50m
Maximum draft : 4.76m
Clear deck Space : 350m² ( 7.5 MT/M²)
Deck loading : 300m²
Max Speed : 13.9kts
Economical speed : 10.0kts
Bollard Pull tonnes : 53.02t
Sewage Plant : 1 x Submerged Bio-filter Treatment SBTC-65
Rudders : 2 x high performance streamline type
Joystick : Marine Technology
Flow Meter : Fitted

Capacity
Fuel Oil : 482m³
Potable Water : 213m³
Drill Water : 463m³
Oil Based Mud : 259m³
Dispersant : 13m³
Dry Bulk : 187m³ in 4 tanks
Foam : 13m³

Pumping Rates
Fuel Oil : 1 x 150m³/hr @ 75m head
Potable Water : 1 x 100m³/hr @ 75m head
Drill Water : 1 x 100m³/hr @ 67m head
Oil Based Mud : 2 x 70m³/hr @ 85m head
Dry Bulk : 2 x 13m³/min @ 80psi (5.6 kg/cm³)

Machinery
Main Engines : 2 x Wartsila 9L20 1,800kW
Generators : 3 x Volvo D30A 569kW
Emergency Generators : 1 x Volvo D 7A T @1.500 rpm
Bow Thruster : 2 x 500kW Tunnel Type
Propulsion : 2 x CPP

Accommodation
Berths : 4x8, 2x4, 1x2
Total : 42

Fire Fighting
Class : 1
Monitors : 2 x 1,642 m³/hr
Pumps : 1 x 1,550 m³/hr

Towing Winch
Type : Electro-hydraulic Double Drum Mentrade waterfall
Pull : 150 MT @ 6.0 m/min at 1st layer
Brake Holding : 200t
Wire Capacity : 56 mm x 1,000m

Anchor Handling Winch
Type : Electro-hydraulic Double Drum Mentrade
Pull : 150 MT @ 6.0 m/min at 1st layer
Brake Holding : 200t
Wire Capacity : 56mm x 1,000m

Tugger Winch
Number & Capacity : 10t
Wire Capacity : 22mm x 220m

Other Deck Equipment
Storage Drum : Electro-hydraulic, 52mm x 1,200m
Towing Pins : 2 x 300t Karmoy
Shark Jaws : 1 x 300t Karmfork
Stern Roller : 1 x 200t 1.5m x 5m
Crane : 1 x 1.2t @ 12m
Deck Voltage & Sockets : 6 x 415V, 4 x 220V
Water Maker : 5m³/day Southern Reverse Osmosis

Lifesaving
Liferafts : 4 x 20 man, 2 x 25 man
Lifejackets : 53
FRC/Rescue Boat/Davit : 1 x 6 man rigid inflatable c/w outboard motor
Lifebuoys : 8
Immersion Suits : 3

Specialist
DP Class : Marine Technologies Bridge Mate DP1

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) -
AHTS Vessel for Sale
2009 Built AHTS for Sale
58m Length Anchor Handling Tug Supply Vessel
42 Berth Accommodation AHTS Vessel for Sale
Anchor Handling Tug Supply Vessel for Sale
---------------------------------------------------------------------------------------------------------

AHTS Vessel - 2009 Built - for Sale

ID 2054

Crown Duke CE 750 SD Trailer Mounted Drilling Rig

Worldoils Marketplace

Crown Duke CE 750 SD Trailer Mounted Drilling Rig For Sale

ID 2660

1996 Built Platform Supply Vessel for Sale

Worldoils Marketplace

84M Platform Supply Vessel for Sale

ID 2180

Spencer Harris 7000 Drilling Rig For Sale

Worldoils Marketplace

Worldrigs ID: WR2196

400hp Land Drilling Rig for Sale
Spencer Harris 7000 Drilling Rig for Sale

Description :

Derrick
Derrick - 97ft Mast, 250,000 lbs hook load capacity
Name Plate
Tri-Axle 5th Wheel Trailer
5th Wheel Hydraulic Carrier
Levelling Pump and cylinder c/w 5HP Kohler Gas Engine
Foster catheads
Cathead Break-out line
Cathead Break-up line
Mast Raising cylinder
Drill pipe Set Back Area
Drillfloor in derrick area
Dead line anchor sensor, tension type
Stairways to rigfloor
Hand railings

Sub-Structure, 12ft
Rathole (Kelly hole)
Kelly shuck
Mousehole
Mousehole shuck
V-Door stairway
Doghouse Staircase

Sub-Base, 2ft (Pony)
Catwalk
Pipe Racks
Racking platform (Monkey Board)
Derrick lighting system
Crown block - 1-1/8" Sheaves
Mc Kissick Traveling Block - 4 sheaves
BJ Unimatic 6100 Hook - 100 Ton, BJ Bails, 2 1/4" long, 250 Ton

Standpipe Manifold
Valve 2" - 5000psi, press. gauge 0-5000psi
Weco Unions - 2"
Pressure sensor
Rotary jumper hose (bottom standpipe)
Gardner Denver 200 ton Swivel
Rotary Hose
Upper Kelly Valve
Kelly 3 1/2" Hexagonal
Kelly 5 1/4" Hexagonal
Kelly drive bushing - 3 1/2"
Kelly drive bushing - 5 1/4"
Lower Kelly Valve
Kelly Saver Sub
Cellar jet
SPENCER HARRIS 7000 DRAWWORKS
- Drum lebus grooved 1 1/8", Crown-o-matic, Socket for 1 1/8" Blockline
CAT 3306 DIESEL ENGINE - exhaust muffler

Parmac 15" Hydromatic Brake - bearings, Air clutch,
Cooling Water Pump 2"x3" & 15hp Motor

Foster cathhead - Make-up chain, Break-out wire
Drill Line - 1- 1/8" diameter, 6*19 IWRC, 65 ton, approx 3000 ft
Drill Line Spool
Drillers Console
Gardner Denver Rotary Table - 17 1/2", Rotary Drive
Sprocket, Drive chain, Chain Guard

Masterbushing
Ingersoll-Rand Rig Floor Airwinch
Airwinch Cable's - 5/8"

BOP Control
Shaffer B.O.P. Closing Unit -Shaffer 6 Station, B.O.P.
Accumulator Fluid
Goodal Control Line - 80' * 1"
Remote Control Panel
"11" 5000 PSI Shaffer Annular BOP
Shaffer B.O.P. 11", double studded complete with 2" side outlets.
4" blind flanges and 4 1/16" for choke line and
4 1/16" x 2 1/16" 5000# studded for kill-line in place

Studs & Nuts - 1 3/8" x 10"
Ring Gasket - RX 54

Kill Line Side
Ring Gasket - RX 54
Gate Valve - 2" - 5000#
Check Valve - 2" - 5000#
Studs & Nuts

Choke Line Side
Ring Gasket - RX 39
Ring gasket - RX 35
Gate Valve - 2" - 5000#
Stud & Nuts - 1 1/8" x 7,75"

Mud Treatment Package
SHAKER PIT - 10' x 46' 3 Comparttment with staircase
Single Harrisburg Shale Shaker - double deck, with 5 HP
Marathon Electric Motor & Dumplate Screens

Lightening Agitator - S/N SDS - 225 with 7,5 hp Marathon
Electric Motor Frame 215 T

Desander - 10" Harrisburg Cone Inserts
Desilter - 8" - 4" Harrisburg, 2 Blank Cone Inserts
Harrisburg Centrifugal Pump - 5" x 6" with 40 hp Marathon
Electric Motor, Type TGS, Frame 324 T

DEMCO Centrifugal Pump - 5" x 6" with 50 hp Electric Motor,
Type TGS, Frame 326 T, 62 Amp, 460 V

Mudguns - Stationary
Atmospheric Mud Gas Separator
Degasser -DRILCO Flo-See

Suction Pit
Active compartment
Slug compartment
Staircase
Hoses, connecting tank rigline
Suction lines
Mud Rheology Station
Harrisburg agitator - with 7,5 hp, U.S.electric motor, frame 254T
Harrisburg agitator - with 7,5 hp, Marathonelectric motor, frame 215 T
Harrisburg Centrifugal Pump - 5" x 6" with 40 hp Marathon
Mudgun
Mud Hopper Pump
Water tank - 50m3 Capacity
Centrifugal pump - 2" x 3" Harrisburg with 20 hp Gen. El. motor

Mud Pumps
Mud Pump # 1, AMERMAN GA 550 - 7 1/4" x 2 1/4" x 14" duplex Maximum WP 3000 psi
Suction - 10"
Suction Strainer
Discharge Strainer
Pulsation Dampener - Hydril
Pressure hose to mud Line
Mud Pump # 2, Mud Pump F-1000, triplex, rated stroke length 10”,
Maximum WP 5000 psi

Suction - 10"
Suction Strainer
Discharge Strainer
Pulsation Dampener - Hydril
CATERPILLAR D 353 Engine - for mud pump # 1, 410 hp
Air-operated control lines
CATERPILLAR D 353 Engine - for mud pump # 2, 410 hp
Air-operated control lines

Generator Package
GENERATOR HOUSE - steel enclosed
CENERATOR NO 1- 155 KW
CAT 3306 DIESEL ENGINE, 250HP
GENERAtOR NO 2 - 155 KW
CAT 3306 DIESEL ENGINE, 250HP
Electric Control Panel
Quincey Air Compressor - Model 390-21, 7 1/4" by 4x4,
powered by a 15 hp Marathon Electric Motor

Air Receiver
Air Dryer

Fuel System
Fuel Supply System
Fuel Tank - 188 bbl
Teel 1" x 1" Centrifugal pumps - with 2 hp Marathon Elect. Motors

Rigsite Accommodation
TOOL PUSHER UNIT - container type caravans comprising" 2 bed bedroom,
air-conditioning, office, shower & toilet facilities, washing machine, furniture etc.

10 Man bunkhouse unit - container type caravan with communal shover and toilet facilities
Kitchen Galley -fully equipped kitchen and communal eating facilities
Storage container
Container - mech. shop

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
------------------------------------------------------------------------------------------
Search words (for official use only) -
400hp Land Drilling Rig for Sale
Spencer Harris 7000 Drilling Rig for Sale
Mechanical Drilling Rig for Sale
400hp Mechanical Drilling Rig
Spencer Harris Land Drilling Rig for Sale
---------------------------------------------------------------------------------------------

Spencer Harris 7000 Drilling Rig for Sale

ID 2196

Worldoils Marketplace

Worldrigs ID: WR2825

Crew Boat - 2002 Built - For Sale
2002 Built/Refitted Crewboat for Sale

Description :

General

Year Built / Refitted : 2002
Tonnage : 97-GRT, 67-NRT
Zero Discharge Capable

Main Particulars
Length Overall : 157.0 Ft.
Beam (Hull) : 29.0 Ft.
Beam (Max.) : 31.5 Ft.
Depth : 14.0 Ft.
Draft (Light) : 5.75 Ft.
Draft (Max.) : 9.25 Ft.
Air Draft : 42.0 Ft.
Displacement (Lightship) : 165.4 Lt
Displacement (Max.) : 490.0 Lt

Performance
Speed Light Boat : 25 Kts @ 190 gph
Speed Loaded : 21 Kts @ 265 gph

Deck Cargo
Clear Deck : 100ft X 25ft
Tonnage : 230 Lt (As Per Stability Letter)

Capacities
Fuel : 133.95 M3
Rig Water (Potable) : 192.33 M3
Ships Potable : 3.13M3
Lube Oil Tank : 0.61 M3
Dirty Oil / Bilge Water : 5.51 M3
Rig Water (Grey) : 26.54 M3
Sewage Holding Tank : 3.74 M3
Grey Water Holding Tank : 2.04 M3

Accommodations
Passengers : 65 (Seated)
Staterooms : (6) 2-Man (12 Total Bunks)
Heads : 2
Galley Seating : 8
Air Conditoning/Heating : 2 Units
Walk-In Cooler : 182 Cubic Feet
Walk-In Freezer : N/A

Transfer Rates
Fuel : 280 GPM @ 200 ft.
Rig Water (Potable) : 240 GPM @ 150 ft.

Machinery
Total Horsepower : 6,300 Bhp
Main Engines : (4) Cat 3512b @ 1575 Hp
Gears : (4) 2.52:1 Zf 4600
Propellers : 50 X 50 4-Blade
Bow Thrusters : Cat 3306 With 125 Hp Key Power
Generators :
(2) 75 Kw Cummins 6BT122-1800

Fire Monitor(S) : 1000 Gpm

Additional Equipment
Davit Retrieval System : 1 Stbd. Side
Anchor(S) : 2 @ 150 Lbs

Electronics
VHF : 3
SSB : 1 Furuno
Radars : 2 Furuno
GPS : 1 Furuno
Compass : 1 Magnetic
AIS System : 1 Furuno
Navtex : 1
Depth Sounder : 1 Furuno

Price & terms : Please enquire using the email form below

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
-----------------------------------------------------------
Search words (for official use only) :
157FT Crew Boat for Sale
25 Knots Crew Boat for Sale
65 Passenger Crew Boat for Sale
Crew Boat - 157ft - for Sale
47.85M Crewboat for Sale
-------------------------------------------------------------

Crew Boat - 2002 Built - For Sale

ID 2825

2007 Built Atlas Copco RD20 Range III Drill Rig

Worldoils Marketplace

Atlas Copco RD20 Range III Drilling Rig - For Sale

ID 1047

Worldoils Marketplace

Worldrigs ID: WR2758

Foremost DR-24 Drilling Rig for Sale
Drilling Rig - Foremost DR-24 - For Sale

Model : DR-24 Drill Rig
Manufacturer : Foremost Barber
Year : 2001
Condition : Used

Description :

2001 Foremost DR-24 Drill Rig
Mounted on 2001 Freightliner Truck
Caterpillar C-15 Diesel Engine (rated 500 HP)
4,100 Hours as of 10/16/20
Atlas Copco 900 cfm / 350 psi Air Compressor
24” Diameter Dual Rotary Power Head
Set up for 2-7/8" IF Drill Rod and 6” Beco Rod
4 piston FMC Bean water injection pump

Oil injection system

Jaws 6, 8, 10, 12, 14, 16, 18, 20, 24 inch
Welding (Cage) Clamp 6, 8, 10, 12, 14, 16, 18, 20, 24 inch
Divertor for 4-1/2 inch Drill Rod with adaptors for 6, 8, 10,
12 inch casings
Divertor for 10-3/4 inch drill rod with adaptors for 12, 14, 16, 18,
20, 24 inch casings
Drive Shoes 6, 8, 10, 12, 14, 16, 18, 20, 24 inch
24 - 4-1/2 inch x 20 ft x 2-7/8 IF thread drill rods
6 - 10-3/4 x 20 ft x 6-5/8 Beco thread drill rods
1 – 10-3/4 x 15ft x 6-5/8 Beco thread drill rod
1 - 10-3/4 x 10ft x 6-5/8 Beco thread drill rod
2 – 10-3/4 x 5ft x 6-5/8 Beco thread drill rods
New Miller Welder

Oxy/Acetalene Torch Setup

Foremost DR-24 Drilling Rig - For Sale

ID 2758

Worldoils Marketplace

Worldrigs ID: WR1248

Vacuum Truck for Sale - 2004 built
Used Vacuum Truck for Sale

Specifications
Year of manufacture : 2004
MAWP : 14.9 psig at 200 °F (102.7 KPa at 93.3 °C)
MDMT : -20 °F at 14.9 psig (-28.9 °C at 102.7 KPa)
Nominal capacity : 19,193 L (5,070 US Gal)
Designed temperature range : -29 °C to 93 °C (-20 °F to 200 °F)
Designed pressure rating : 172 KPa (24.9 psig)
Test pressure : 275 KPa (39.9 psig)

Shell material : SA36
Head material : SA285C
Min shell thickness : 5.5 mm (0.22”)
Min head thickness : 7.1 mm (0.28”)
Manufactured shell thickness : 7.9 mm (0.31”)
Manufactured head thickness : 7.9 mm (0.31”)
Weld material : EM12K
Max product load : 15,354 L (4,056 US Gal)
Max lading density : 1.0 kg / L (2.2 lb / L)

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
------------------------------------------------------------------
Search words (for official use only) :
Vacuum Truck for Sale - 2004 built
2004 built Vacuum Truck for Sale
Used Vacuum Truck for Sale
-----------------------------------------------------------------

Vacuum Truck for Sale - 2004 built

ID 1248

18,000 LPG Propane Tank - 1948 Built - for Sale

Worldoils Marketplace

1948 Built 18,000 LPG Propane Tank - For Sale

ID 2863

Worldoils Marketplace

Worldrigs ID: WR2098

Trailer Mounted Crown 1000 Drilling Rig for Sale
2008 Built Crown 1000 Drilling Rig for Sale

Description :

Drawworks: Crown 1000 powered by (2) Detroit diesel series 60, 14L 680 HP each, two
Allison model S5610H transmissions, eaton break, hydraulic make up and break
out cathead, Pason Systems automatic driller and recorder

Mast: Crown 118’ 440,000#

Substructure: 16’ floor, 13’2” under rotary beam, 440,000# rotary table,
300,000# set back

Rotary Table: Ideco 23”

Block: Mckissick 300 on, 10 line blocks

Swivel: 300 Ton Ideco swivel with foster spinner

Top Drive: Tesco 250 HXI 700

Mud Pumps: (2) F1000 triplex pumps

Mud Pits: dual vortex linear shakers, 12 cone desilter and 3 cone desander
with 60 bbl slug pit, 850 bbl capacity, 150 bbl trip pit

Mud Mixer: 5” x 6” x 11” and 5” x 6” x 14” magnum centrifugal pumps

Light Plant: (2) Detroit 14L, 415KW light plants

BOP: 11” hydril/double rams, 5000#

Accumulator: Koomey 6 station, 80 gallon with 6 choke manifold flare stack and separator

Water Tank: 260 bbls

Generator Trailer: Generators fuel & oil tank accumulator

Dog House: 39’8”L x 10’3”W x 9’9”H

Tool House: 43’3”L x 8’10”W x 9’9”H

Pusher Shack: 46’7”L x 11’7”W x 10’7”H

Drill Pipe: 15,000’ of 5” S135

Elevators: 5”BJ D.P., 150 Ton 5 ½” BJ side door 100 ton

Slips: 5” Wooley DP slips 5 ½” Bash Ross DC slips 7” BJ slips 8 5/8”
Wooley slips – 5” Wooley 150 Ton & 50 Ton LNG

Tongs: Type B 4”-8 5/8”

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Crown 1000 Drilling Rig for Sale
2008 Land Drilling Rig for Sale
Crown 1000 Drilling Rig for Sale in USA
New Drilling Rig - Crown 1000
---------------------------------------------------------------------------------------------------------------

Crown 1000 Drilling Rig for Sale

ID 2098

Featured equipments for sale

Worldoils Marketplace

Landing Craft Tank 45 Meters - For Sale

ID 2668

Worldoils Marketplace

Worldrigs ID: WR1455

Nitrogen Units for Sale
Nitrogen Pump Units - For Sale

Description
The injector (80K), and data acquisition SW from NOV.
The unit comes with full 12 months warranty, training/Commissioning
and 1 year spare parts and tools.

Brand new Nitrogen Pumping unit, 180k, 2000gl tank, control cabinet with AC .
The Unit is currently tested and ready to ship.
The N2 unit comes with 12 month warranty, tools, spares and training.

Made in USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------
Search words(for official use only) :
Nitrogen Units for Sale
New Nitrogen Pump Units with 2000gl tanks
80k Nitrogen Pump Units for Sale
-------------------------------------------------------------------------------

Coiled Tubing Unit Nitrogen Units for Sale

ID 1455

Worldoils Marketplace

Worldrigs ID: WR2061

Deck Barge - 35mt - for Sale
2015 Built Barge for Sale

Description :

Built : 2015 just launched in lstanbul
Dimensions : 35 mt x 12 mt x 2 mt
DWT : 500 tons
Deck strenght : 10 tons / m2
Class : BV : I + Hull , Pontoon , Unrestricted Navigation
Depth M : 2.75 mt
Draught : 2 mt
Paint : Jotun

Ready for delivery
Price : upon request

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------
Search words (for official use only) -
Deck Barge for sale
2015 Built Deck Barge for sale
35 mt x 12 mt Deck Barge for sale
Deck Barge for sale in lstanbul
-------------------------------------------------------------------------------------------------

Deck Barge - 35mt - for Sale

ID 2061

Worldoils Marketplace

Worldrigs ID: WR1231

Drilling Rig 13,000' Capacity - for Sale
Used Drilling Rig for Sale

Draw-works
JC 40 DB draw-works with 238DBBS Eaton air-cooled
disc brake powered by (1) 1000 (kw) AC traction motor

Substructure & Mast
JJ225/42-KS1 138’ mast, 500,000 hook load .
1 1/8” Line; hydraulic raising
Substructure=DZ225/6.
7-S1; height 22’ H;
500,000 set back load; hydraulic raising

Generators
3)1000GF4- 1000 KW;600 volt;60 Hz;
AC generators powered by (3) Chinese 3512 diesel engines)
(1) Volvo auxiliary gen set 400kw 480v 60 Hz only for pre start.

Mud pumps
(2) HHF-1300 hp; powered by (1 each) 1000 (Kw) AC traction motors;
max output 720GPM (7” liners)

Rotating & traveling equipment
Model ZP275 27 1/2” rotary table

Blowout prevention
13” 5,000 lb. annular Bop
13” 5,000 lb. double gate Bop
Pressure control unit FKQ 7206 automatic accumulator;
5-station air actuated remote control panel
4” & 3” 5,000 lb. complete manifold with gauges and manual chokes.

Doghouse, water & mud tanks
Heated doghouse :
(3) 9’8” x 8’ 9” x 41’ mud tanks complete with (6) - 6” x 8”
electrical driven centrifugal pumps manifold to low pressure system
with (8) electrically driven mud agitators, (10) mud guns – 1566-barrel capacity
(2) – derrick 500B shakers
(1) – degasser Vacu-flo 1200
(1) - ZQJ250 x 2 desander
(1) - ZQJ100 x 10 desilter
(1) - LW450 x 1000 centrifuge
(1) - hopper

Handling tools/Auxiliary equipment
BJ 48” type B tongs
Sure shot 7º A-1 survey Iinstrument
M.D.Totco type D weight indicator

Drill Pipe & drill collars
13,000’ 4 1/2” OD 16.60 lb drill pipe=9 loads
(21) 6¼“ x 2¼“ x 30’ slick drill collars=2 loads
(2) 8” x 30’ drill collars=1 load

Loads = 25 depending on how rigged down without drill pipe, collars, and trailers

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Drilling Rig 13,000' Capacity - for Sale
Land Drilling Rig - JC 40 DB draw-works - for Sale
Used Drilling Rig for Sale
---------------------------------------------------------------------------------------------------------------

Drilling Rig 13,000' Capacity - for Sale

ID 1231

Newbuilding Derrick/Pipelay Barge for long term charter

Worldoils Marketplace

Worldrigs ID: WR698

Derrick/Pipelay Barge for long term charter
Newbuilding Barge for Charter
310 pax Derrick/Pipelay Barge with 3000ton Crane for Charter

Principal Particulars
Class Notation :
ABS class Maltese cross +A1Barge Unrestricted
service Derrick/PipeLay Barge

Length Overall : 169.00m
Beam Moulded : 46.00m
Depth Moulded : 13.50m
Draft Moulded : 7.00m

Operation drought approx. : 63,500T
Ballast capacity : 35,000 cbm
Fuel oil capacity 4,000 cbm
Potable water capacity : 3,000 cbm

Accommodation
12 x One-man cabins : 12 men
51 x Two-man cabins : 102 men
49 x Four-man cabins : 196 men
Total Complement : 310 men

Pipelay Equipment
Capacity : 4"~48", Max. 60" outdia.
Tensioner : 2 Tensioners, 100T each
A&R winch : Ø88 x 1200m 200T Min. tension
Davit : 5 mounted, capacity 30T each
Stinger : Fixed

Crane (ZPMC)
Main hook :
3000MT x 30m(stern)
2000MT x 35m(revolving)

Auxiliary hook : Load 600MT
Height : 95m
Depth under water : 150m

Machinery
Diesel engine :
Hyundai 8H25/33, 4 x 2400Kw, 450V/3pH/60Hz

Main generator :
Hyundai 1 x 2256Kw, 450V/3pH/60Hz
Auxiliary gen. set Caterpillar 1 x 315Kw

Life Saving
Life raft : 22 x 25 men
Life buoy : 16 sets
First Aid Kit : 1 set
Rescue boat : 1 Unit with single arm davit
Life jacket : 17 pcs

Deck Machinery (SKW)
Mooring Winch : 12 sets of mooring winch with 200t drake brake
Mooring Anchor : 12 tones Delta Flipper type
Wire ropes : 12 sets x 76mm wire rope and 2500m long each

The main deck is capable of store abt.5000t pipes. The loading, unloading and
transfer of pipes is to be carried out by one (1) pipe crane, roller and transport
be fitted on stern.

Navigation & Communication (Raytheon/Furuno)
DCPS 2 sets
Navtex receiver : 1 set
VHF : 1 set
Two way VHF for life boat : 3 sets
Echo sounder : 2 sets
GPS : 1 set
Magnetic Compass : 1 set
Radar system : 2 sets
Gyro Compass : 1 set

Auxiliary Equipment
Sewage treatment units
Fresh Water maker
F.O. transfer pump
Ballast system
F.W. pump
Fresh Water transfer pump
Dirty Oil pump
Bilge & ballast pump
Oily water separator
Sewage treatment plant
Intended Area of working : Worldwide

Crane expected completion/delivery Feb 2012

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
---------------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Derrick/Pipelay barge for a long term charter
310 pax Newbuilding Pipelay barge for a long term charter
New Derrick/Pipelay Barge for Charter
310 pax Pipelay barge for Charter
New 3000 ton crane Derrick/Pipelay Barge for charter
----------------------------------------------------------------------------------------------------------------

Derrick/Pipelay Barge - 310 pax New building - for Charter

ID 698

Worldoils Marketplace

Worldrigs ID: WR279

FPSO Scale Models for sale
FSO Scale Models
Tanker Scale Models
Display Ship Models

We make all kinds of International & professional models as follows :
Ship scale models
Engineering scale models
Rig scale models
Offshore vessel models
Yacht Models

We can custom build any ship and any scale such as :
1:500
1:400
1:300
1:200
Other scales also

We can build made-to-order models

Please see clear photos on : http://www.worldoils.com/models/models.php

If you are interested in the models, please contact us on email address : mail@worldoils.com

------------------------------------------------------------------------------
Search Words(for official use only) :
Gift Ship Models
Container Ship Scale Models
Tanker Models
LPG Ship Scale Models
Accommodation Barge Scale Models
-------------------------------------------------------------------------------

FPSO Scale Models

ID 279

Worldoils Marketplace

Worldrigs ID: WR1394

Ocean going tug for sale
8000 BHP Ocean going tug for sale
Salvage tug for Sale

General Particulars
Year Built : 1989
Classification : RINA,Italia
Type : Ocean Going/Salvage Tug Boat

Principal Dimensions
Length Overall : 72.4m
Beam : 13.01m
Depth : 6.00m
Draft : 5.37m
Maximum Draft : 4.12m
Grass Tonnage : 1,819 tons
Net Tonnage : 545 tons

Capacities
Fuel Oil(MFO) : 1,423.78 m3
Fuel Oil(MGO) : 287.02 m3
Lub. Oil : 33.26 m3
Fresh Water : 288.06 m3

Towing equipment
Winch : Double Drum Hydraulic Brattvarg
Tow Drum : Two
Capacity (each drum) : 64mm wire x 900m
Towing Hook : Breaking Load 30 tons
Delta Plate
Shackles
Chaffin Chain
Solar Light

Vessel's Mooring
Windlass : 2
Tugger Winch : 2
Capsterm : 1

Machinery
Main Engine : NIIGATA 8MG40X
BHP / RPM @ 100% : 4,000BHP x 2 Sets(8,000BHP - 5,884KW)
Bollard Pull : 108.0 Ton
Propeller : FPP Type x 2 sets
Aux Engine : YANMAR 6MAR-HT,470HP x 2 sets
Generator : 280KW x 2 sets,440/110V 60Hz
Emergency Generator : 35KW Generator 1 sets
Bow Thruster

Performance (Typical)
Max. Speed : 12.5 Knots
Eco. Speed : 10.0 Knots
Endurace : 90 days
Bollard Pull : 108.0 MT

Navigation equipment
Radar 1 : JRC / JMA-9122-6XA
Radar 2 : JRC / JMA-5106
GPS : SAMYUNG / N-100A,SPR-1400
Echosounder : JRC / JFE-570S
Auto Pilot : TKC / PR-228H
AIS : SAMYUNG / SI-30
Inmarsat C : T & T / TT-3020C
BNWAS : HANSHIN / HBN-117
Navtex : SAMYUNG / SNX-300
Anemometer : DONGWON / DW-300

Special Equipment
Deck Crane : 3.0 MT SWL @ 10m Radius
Yokohama Fender : 2sets x 1.5m Dia

Accommodation
Cabins for Crew :
18 x 1-man = 18
Total Accomodation capacity = 18

Messrooms : 1 x Messroom / Seating 24

All accommodation is fully air conditioned

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------
Search words :
Ocean going tug 1989 Built for sale
8000 BHP 108 T BP Salvage Tug for Sale
Salvage Tug for Sale
1989 Built Tug for Sale
Ocean going/salvage Tug
---------------------------------------------------------------------------------------

Ocean Going/Salvage Tug 8,000BHP 108T BP for sale

ID 1394

Worldoils Marketplace

Worldrigs ID: WR1404

Booster Pump for Wellhead Platform
Multiphase Booster Pump for Oil Platforms

Performance
Rated Capacity (m³/h) : 2105
Rated Speed (rom) : 1242

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Booster Pump for Wellhead Platform
Multiphase Booster Pump for Oil Platforms
Wellhead Booster Pump
Multiphase Booster Pump for Wellhead platforms
High capacity Oil Booster Pump
---------------------------------------------------------------------------------------------------------------

Oil Booster Pump for Sale

ID 1404

Worldoils Marketplace

Tug Boat - 29m - For Sale

ID 2716

Victory Trailer Mounted Drilling Rig - 2009 Built - For Sale

Worldoils Marketplace

Worldrigs ID: WR2754

Victory Trailer Mounted Telescopic Mast, Double Rig for Sale
Victory Trailer Mounted Drilling Rig - 2009 Built - For Sale

General Description

Make : Victory
Year Built/Rebuilt : 2009
Estimated Drilling Depth : 12,000 ft
Estimated Rig Move Loads : 48
Estimated Camp Move Loads : 4
Rated HP : 850

Mast
Height : 105.00 ft
Static Hook Load Capacity : 350,000 lbs
Mast Racking Capacity : 12,000 ft

Substructure
Style : Telescoping
Height : 20.00 ft
Clear Height : 17.00 ft
Casing Capacity : 440,000 lbs
Maximum Setback Load (lbs) : 375,000

Drawworks

Make : TSM

Power Rating : 850 hp

Brake Type - Band or Disc : Disc
Drilling Line Size : 1 1/8"
Auxillary Brake : TSM 236H SSB 90#RL W/CVCP

Top Drive / Power Swivel

Make : Victory Rig Equipment

Model : VRT200H
Capacity : 200 Ton
Torque - Continuous : 16,000 ft-lb

Swivel
No Swivel

Rotary Table
Make : TSM 17.5
Table Opening : 17 ½"
Maximum Load Rating : 150 Ton

Power Generation
Engines : 3 ea Caterpillar C 32
Generators : 3 ea Caterpillar SR 4 B
SCR / VFD / DC/DC : VFD Rig

Mud System
Mud Pumps :
2 ea Weatherford Oil Tools MP-10
1,000 hp @ 140 spm
Model : TSM 850
Pressure Rating : 5,000 psi
Reserve Mud Volume : 0 bbls
Shale Shakers : 2 ea MI Swaco Mongoose
Mud Cleaner : N/A
Desander : Brandt 10" X 2 Cones
Desilter : Brandt 5" X 16 Cones
Centrifuge : N/A

Well Control
Annular : 11" 5,000 psi, Doyles Valves,

Single Ram Preventer :

11" 10,000 psi,

Doyles Valves, Type-U

Choke Manifold :
Weatherford oil tools
4 1/16" 10,000 psi
BOP Closing Unit :
T3 Energy Services
6 Station 3,000 psi"

Enhancements

Forklift : Caterpillar 930 H

Iron Roughneck : NOV ST-80 C

Victory Trailer Mounted Telescopic Mast, Double Rig - For Sale

ID 2754

Worldoils Marketplace

Worldrigs ID: WR354

Diving Support Vessel For Sale
DSV for Sale
Survey Vessel For Sale

Dimensions
Length Overall: 49.0 m
Breadth moulded: 12.2 m
Depth moulded: 4.5 m
Summer Draft: 3.65 m
GRT / NRT 783/234

Registration
Built: 1982
Class: DNV +A1(E) + MAS Ocean going towing service

Machinery
Main Propulsion: 2 x 1500 BHP Yanmar T260-ET
Schottel/ Thruster: 1 x 485 BHP 3.5 ton Any direction
Generators: 3 x 160 kW, 440V, 60Hz

Capacities
Fuel oil: 495 m3
Fresh water: 234 m3
Clear deck area: 236 m2 250 ton
16.0 x 8.5 m

Deck Machinery
Crane: Sekigahara Hydraulic Telescopic
Capacity: 3 tonnes @ 12 m outreach
Weather Anchoring System :
2 x electro-hydraulic 7.5 tonne @ 9m/min windlass
with 2 x 1315 kg anchors with 520 m x 32 mm chain
Capstan: 1 x 5 tonne

Accommodation (Total 30 berths)
Cabins / Berths:
4 x 1 berth
3 x 2 berth
5 x 4 berth
Other: Galley, mess / recreation room
Optional Accommodation :1 x 4 Berth Porta-Cabin

Diving Support
Workshop : Lathe, drill, grinder, arc welder – 25kVA
Diving Air Comp 167 m3 /hr @ 14 kg/cm2

Electronics
Radars: Furuno FR-2115 x 72 miles
Auxiliary Radar: Furuno FR7111 x 72 miles
Auto Pilot: Tokyo Keiki with Sperry ES11 Gyro Compass
Satellite Navigation: GPS RS5700 Shipmate
Furuno DGPS receiver

Communications
GMDSS: 1
VHF: 2
VHF Portable: 3
SART: 1
EPIRB: 1
Navtex: 1
Inmarsat M : 1
Iridium : 1

Miscellaneous
Deck : Wood Sheathed Main Deck
FRV/Workboat: Zodiac Inflatable
Safety Equipment: Statutory Life buoys, jackets, pyrotechnics
Air Diving System: Optional
Insp. Class ROV: Optional
Work Class ROV: Optional

Performance
Speed :
@ 100% - 13 kts
@ Economic – 10 kts
Consumption :
@ 100% MCR: 8.5 tonne/day
@ Economic: 7 tonne/day
@ ROV Ops: 2.5 tonne/12 hours

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------------------------------
Search words(for official use only) :
Diving/ROV/Survey support vessel for sale
DSV for Sale
Dive Support Vessel for sale
Diving Support Vessel For Sale
Survey Vessel For Sale
Diving Support Vessel
------------------------------------------------------------------------------------------------------

Diving Support Vessel For Sale

ID 354

Worldoils Marketplace

Worldrigs ID: WR2653

NOV Rapid Drilling Rig for Sale
1500 hp Rapid Drilling Rig for Sale

Description :

Substructure :
NOV - Slingshot type (2 piece)
Clearance : 20ft with 18ft of clearance
Capacity : 500,000# loading
Six well skidding system

Mast :
NOV - Telescoping
Height : 80ft
Capacity : 500,000#
Winch & Gin Pole : 5,000#

Drawworks :
NOV - SSGD 250 (disc brakes)
Rating : 1500- hp
Capacity : 500,000# on eight 1¼” lines.
Motor : Baylor AC

Top Drive :
NOV - TDS 10R
Rating : 250 ton
Torque Capacity :
36,500 ft/lbs intermitting
20,000 ft/lbs @ 98 rpm continuous
9730 ft/lbs @ 182 rpm continuous

Drillers Cabin :
NOV - Purged
Amphion Controls

Pipe Handling :
Iron Roughneck - NOV ST - 80R
Range : 4¼” to 8½”
Torque Capacity :
60,000 ft/lbs make up
80,000 ft/lbs brake out
BX - 450 Elevators (250 ton)
Range : 2 7/8”, 5”,7”, 95/8” & 13 3/8”.
PS - 21 Slips (250 ton)
Range : 2 7/8”, 5”, 7”, 9 5/8” & 13 3/8”.
Erector arm, pipe funnel and pipe rack wings.

Mud System :
Mud Pumps - 2 NOV F-1600
Rated : 1,600 hp.

Discharge manifold & Suction skid

Stand Pipe :

5”, 1002

Mud Pits (covered)
Capacity : 625 bbls
Mixing System & skid
Shale Shakers : 2 Derrick
Trip tank : Two 25 bbl tanks & pumps
Rolling Flow Line System (15ft spacing)

BOP Equipment :
11” X 5m Shaffer Annular (flanged)
11” X 5m Shaffer Double Ram (studded)
11” X 5m Mud Cross (flanged with 3 1/8” outlets)
Re-certified by OEM
Choke Line :
3 1/8” X 5m HCR Valve
3 1/8” 5m Manual valve (replace)
3 1/8 Coflex hose :
Three - 15ft - 3 1/8” flanged choke lines
10ft - 3 1/8” flanged choke line
Four - 3 1/8” studded Tees with one filled blind flange
Kill Line 2” Coflex hose
Two : 3 1/8” X 5m manual valves (replace)
Check Valve :
NOV Hydraulic Handling System
3 1/8” X 5m Choke Manifold (hydraulic & manual chokes)
Gas Buster
Flare Stack & line

Power :
Two 3512C Caterpillar Engines
Rated : 1476 hp @ 1200 rpm
Two Baylor Generators
Rated : 1750 kVa, 600 volts / 60 HZ
NOV VFD & MCC
Bi-fuel System

Drill Pipe :

370 jts - 5” 19.5 #/ft., NC 50

Inspected by Drilco
Critical Capital Spares :
F-1600 Mud Pump
Baylor 1750 kVa Generator (for repair)

Winch – 5,000#

Hydraulic Cylinders :
Substructure Raising (repairing NOV)
Derrick Raising (repairing NOV)
Derrick Scoping (repairing NOV)
BX 450 Elevators
PS 21 Slips

Skid System Description :

Applied Machinery Corporation custom built skidding system.
Capable of 75ft skidding.
Key description :

Rig Skid System :

12” Elevated Skid
Draworks Skid Section
Starter Skid Section (ODS/DS X 43ft)
Standard Skid Section (ODS/DS X 15ft)
Log of Pins, Spreaders, and Claws
AMC Hydraulic Drill Line Spooler
Festoon Track

Hydraulics :
2 Hydraulic Cylinders
10” Bore X 25” Stroke
3,000 psi Working Pressure
Associated Hoses and Fittings

Festoon :
8ft X 35ft X 12” Master Skid
Capable of supporting a 75ft Skid
4” Integrated Track and Roller for Festoon and Grasshopper

Shaker and Flowline Header :
10” “Mona-Flow” line with fittings and jets
Rolling capability to support skids
Trip Tank and mud bucket hoses

Rig Load List

Single Well Pad	Loads	3 Well Pad
Shaker Pit	1	Shaker Pit
Suction Pit	2	Suction Pit
Trip tank & Choke Manifold	3	Trip tank & Choke Manifold
F- 1600 Mud Pump	4	F- 1600 Mud Pump
F- 1600 Mud Pump	5	F- 1600 Mud Pump
Utility Skid	6	Utility Skid
3512 Caterpillar Gen Set	7	3512 Caterpillar Gen Set
3512 Caterpillar Gen Set	8	3512 Caterpillar Gen Set
Air Compressor Skid	9	Air Compressor Skid
VFD	10	VFD
Festoon & Grasshopper	11	Festoon & Grasshopper
Fuel Tank	12	Fuel Tank
Rig Water Tank	13	Rig Water Tank
Drawworks / Koomey	14	Drawworks / Koomey
Substructure	15	Substructure
HPU Skid & Grasshopper	16	HPU Skid & Grasshopper
Drillers Substructure	17	Drillers Substructure
Drillers Cabin	18	Drillers Cabin
Drill Line Spool	19	Drill Line Spool
2 Pipe Wings	20	2 Pipe Wings
2- Pipe Wings &Arm	21	2- Pipe Wings &Arm
Flow line, Pipe Handler, CoFlex	22	Flow line, Pipe Handler, CoFlex
Flare Box & Line	23	Flare Box & Line
2 sets Pipe Racks	24	2 sets Pipe Racks
2 X Hose Baskets	25	2 X Hose Baskets
Drill Pipe: 5" , 19.5 #/ft	26	Drill Pipe: 5" , 19.5 #/ft.
Drill Pipe: 5" , 19.5 #/ft	27	Drill Pipe: 5" , 19.5 #/ft.
Drill Pipe: 5" , 19.5 #/ft	28	Drill Pipe: 5" , 19.5 #/ft.
Pipe Bunks X 4	29	Pipe Bunks X 4
Tool / Nipple House	30	Tool / Nipple House
Hydraulic Shop	31	Hydraulic Shop
Parts House	32	Parts House
BOP in Cradle	33	BOP in Cradle
Stairs & Porches	34	Stairs & Porchesin Cradle
Mats X 5	39	Mats X 5
	44	Flow Line X 2
	48	Skid System X 4

Price & terms : Please enquire using the email form below.

NOV Rapid Drilling Rig for Sale

ID 2653

2000 Length Slip on Dredge Pipeline Float

Worldoils Marketplace

Worldrigs ID: WR2648

Slip on Dredge Pipeline Float for Sale

Slip on Dredge Pipeline Float - 700mm for Sale

Description :

High Impact Polyethylene Floats with no accessories required,
simple slip-on design. Mostly used where sizes are very large
MS Steel Pipelines. PU foam filling option available.

Features :
Light weight-easy slip-on installation
No accessories required
Thick PE shell with eco-friendly PU filling
for maximum impact resistance
Excellent weathering and UV resistance
Good visibility from a distance.

Application :
Dredge Pipe Lines
Water Transportation

Slurry Transportation

Pipe Size	ID	OD	Length	Approx Buoyancy (kgs)
700	720	1400	2000	1850
800	820	2000	2000	4400

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------
Search words (for official use only) :
2000 Length Slip on Dredge Pipeline Float
New Slip on Dredge Pipeline Float for Sale
700mm Slip on Dredge Pipeline Float for Sale
Light weight Slip on Dredge Pipeline Float
------------------------------------------------------------------------------

Slip on Dredge Pipeline Float for Sale

ID 2648

Worldoils Marketplace

Worldrigs ID: WR1051

Linear Winch KTC 240 for Sale or Charter
Winch for Sale - KTC 240

Scope of supply :
Equipment :
1 Continuous linear winch KTC-240, 240 tonnes @ 1.3 m/min
2 Hydraulic control modules, itegrated on the KTC-240
1 PLC control cabinet for the winch command
1 Control console
Factory testing of the unit
Commissioning and start-up spare parts
Painting and Protective coatings
Tagging
Documentation
DNV witness certificate
Weighing
Preservation, Packing & Marking
Delivery FCA Paris workshop
Operator training
Commissioning and start-up assistance

General characteristics :
Pulling capacity :
240T @ 0 to 1.3 m/min
115T @ 0 to 2.4 m/min
Operating temperature :
-15°C <T< +50°C (linear winch)
+5°C <T< +40°C (control cabinet and console)
Storage temperature :
-20°C <T< +60°C (linear winch)
-20°C <T< +60°C (control cabinet and console)
Environment : marine, on open deck
Hazardous area : zone 1 IIB T4

KTC-240 Linear winch :
The blocks are guided along 2 parallel U rails with stainless steel
removable supports and self lubricated interchangeable bearings.
For weight reasons, the frame is built in 2 seperate bolted parts,
and the gripped are removable from the frame.
The linear winch is attached working hanging or rested, horizontally
on deck foundations (yard supply).
Continuous motion.
Strong construction frame.

Characteristics :
Pull-in capacity (SWL) : 240 metric tones (to be tested during fat)
Speed at up to 240T : 1.3 m/min continuous and adjustable
Speed at up to 130T : 2.4 m/min continuous and adjustable
Oil consumption at maximum speed : 2 × 120 l/min
Pressure at SWL : 290 barg
Back tension at SWL : not required
Jack stroke : 950 mm
Wire rope diameter : 72 mm (with changeable inserts)
Maximum cable dia : 89 m (3" 1/2)
Overall dim : 2.24 m (W) × 8.10 m (L) × 0.80 m (H)
Weight : 23.5 tonnes = 2 ×(6.95 t + 4.8 t)
Design life : 25 years operation

The winch shall be capable of hauling-in and paying-out under any load,
in automatic and manual mode, in continuous operation.
It also includes 4 guide rollers (2 horizontal and 2 vertical ones) for the
back side (low tension side).

Hydraulic control modules :
The linear winch frame includes 2 hydraulic modules (one for each gripper)
for the synchronization, control and safety of the grippers of the linear winch.
They are mounted and piped on the frame itself. They are suitable to operate
into a hazardous area (Atex zone 1).

They are equipped with an integrated line-pull limitation. A potentiometer
adjusts the line-pull between 0 and 100%, and a software preset adjusts
the 100% betweem 50 t and 240 t.

For the powering of the linear winch, an external and independent
2 × 75 kW. HPU in LS control and with 2 × 130 l/min @ 310 barg. The HPU
has 4 outlets on each pump : pressure, return, drain and LS. The linear
winch must be fitted to this system for male connections (hydraulic inlet
power to the linear winch).

Required oil power for the linear winch should be as follows :
two identical and independent supplies (1 for each gripper) of 3 lines
each, with each the following utilities requirements :
P with 130 l/min at 310 bar per gripper
R with 160 l/min at ≤ 5 bar per gripper
D with 15 l/min at ≤ 1 bar per gripper
LS connections

Fittings internal on the linear winch :
On the main connections/ tubing it's require with SAE flanges.
On the smaller connections/ tubing where SAE flange won't
be used (10 and 12 mm tubes) it's required with parker EO2
fittings.
The hydraulic connections shall be assembling on one place
(scot plate) for each gripper.
Connections shall be as follow :
Pressure : 5/4" bsp male
Return : 1.1/2" bsp male
Drail : 3/4" bsp male
LS : 1/4" bsp male

Local control cabinet & panel :
The winch is supplied with the PLC control and command,
necessary for its full control and located remotely to the
winch. It is suitable for hazardous area (Zone 1)

a) PLC Cabinet :
The PLC cabinet is supplied loose, to be mounted into a
weather protected control container

It will include :
EExd cabinet
Power supply 230 v - 50/60 hz delivered with electrical supply cable
H07RN-F rubber cable 2,5G3 (2,5 mm2 with 2 conductors + earth)
PLC, Siemens S7
I/O cards
Profibus card
Terminals block

This PLC is used to control the linear winch functions (in automatic
and manual operations).

There is also a Profibus port available for connection with the HPU PLC.
It may be used for interfacing the HPU commands (on-off) and to monitor
the HPU faults and alarms.

Control panels :
It will include the following :
316L stainless steel panel, 3 mm (385 mm (H) × 540 mm (W)
Synoptic panel
Control buttons & lamps
Linear winch
Speed potentiometer
Line-pull potentiometer
Button manual / 0 / automatic
Push-buttons for manual speed control
Wedges opening controls
Pull / pay-out selector
Start / stop
Stop buzzer / fault reset
Lamp test
Emergency stop
Pilot lamps :
5" 1/2 Exe screen for cable tension, speed & length displays,
status and faults & alarms displays, and calibration set & preset inputs.
Connection block

Party verification :
This order includes a 3rd party FAT witness certificate from DNV.
It includes :
Witness of pressure tests (hydraulic cylinders, piping)
Witness of FAT
Lifting pad-eyes certificate DNV 2.7.3 for offshore handling.
Drop tests and lifting on 2 points are not provided.
Manufacturing documentation review
FAT witness

Protection :
This equipment is designed to be operated on open deck.

Painting : A 3 coating marine paint, 320 µ is included. It will be according to Norsok
M501 RAL 1007 system 1.
Concerning the piping on the winch, it is CS made, and the manifold blocks
have BSP ports for fitting quick release couplings.

Quality control :
Quality control is carried out according to ISO 9001-2008.
An ITP is issued during the first month after contract, and progress plan and
reports are regularly controlled.

Documentation :
All the necessary documentation ( according to Norsok Z-015)
related to the design, fabrication, testing, inspection and maintenance of the riser
pulling equipment will be provided

This will include :
Design drawlings and as-built GA drawings
Material certificates and test reports
Equipment and instrumentation data sheets
Traceability records of raw materials such as steel plate, fasteners, pins
and shafting from Kley France sub-vendors.
Welding procedures (WPS's), Procedure qualification reports
(PQR's), and welder qualifications
NDE procedures, records, and qualifications of NDE personnel
Non-conformance/discrepancy reports and final dispositions
Dimensional control reports
Weight and centre of gravity data sheets and certificates
Kley France certificate of compliance
DNV certificates
Installation and preservation procedures
Operasjon and maintenance manuals
Lists of available spare parts

Sale/charter rate & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------------------------------
Search words :
Linear Winch for Sale
Linear Winch KTC 240 for Sale or Charter
KTC240 Linear Winch for Charter
Winch for Sale - KTC 240
Linear Winch KTC 240 for Sale
Linear Winch for Charter
Winch for Sale or Charter
---------------------------------------------------------------------------------------------------

Linear Winch KTC 240 for Sale or Charter

ID 1051

Worldoils Marketplace

Used Landing Craft Tank for Sale

ID 2693

Worldoils Marketplace

Worldrigs ID: WR1111

Lattice Boom Offshore Crane for sale
300 ton Offshore Lattice Boom Crane
New Offshore Crane for Sale

Newbuildings - Can be delivered in 8 months

General Specification
Slewing Angle : 360º(Continus)
Slewing Speed(Full Load) : 0~0.3rpm
Luffing Time(Full Load) : 360s Up/down
Luffing Angle : +15° ~ +82.5°
Parking Angle : -6° ~ +15°
Operator Cabin : Left Side

Main Winch Data
Lifting Capacity(SWL) : See Loading Chart;
No. Of Fall : 12 Falls for 300T ; 6 falls for 145T
Working Radius : 11.2m(Min) / 57m(Max)
Main Lifting Speed(0-125T) : 3m/min for 300T ; 6m/min for 145T
Hook Travel : 63m

Aux Winch Data
Lifting Capacity(SWL) : 30T@62m, Man Riding :1.5T
No. Of Fall : 1
Working Radius : 13.4m(Min) / 62m(Max)
Main Lifting Speed(Full Loading) : 0~25m/min
Lifting Height : 68m

Note :
All operational speeds stated above are based on average volumetric efficiencies provided by
our suppliers of hydraulic components. A speed variation tolerance of +10% to -5% is within
the accepted range and should be taken into consideration.

Hydraulic Arrangement

Hydraulic Systems
The hydraulic transmission will be designed for optimum performance within the constraint of
available horsepower. High pressure hydraulic system uses power more efficiently and applies
power as needed.

All motions controls offer infinitely variable speed and full reversing characteristics. Two full flow
filters will be installed. The filter(s) will be adequately sized for full flow operation without causing
pump cavitation. Replaceable wire mesh filter cartridge of minimum absolute value of 40 micron
will be used. The pumps will have overflow suction independent of the reservoir, and the
arrangement of piping can avoid air pockets.

Hoisting Circuit
Each winch is driven by a common open loop hydraulic system including piston pump, piston
motor and epicycles gearbox. Each winch is fitted with oil immersed, multi-disc and dynamically
rated “fail safe” brake.

The fixed displacement hoist motors offer a constant operating speed.

Slewing Circuit
The slew circuit is driven by a common open loop hydraulic system. Dynamic braking of slewing
is by means of hydrostatic compensation. Similarly positive locking brakes are fitted in the circuit
and used as static brake

Luffing Circuit
Luff circuit is driven by a common open loop hydraulic system. Each winch is fitted with oil
immersed, multi-disc, dynamically rated “fail safe” brake. An additional luff ratchet cylinder is
included, providing a positive means of locking the luff drum whenever the prime mover is
shutdown.

Hydraulic Piping
1. Pipes: No pipe threads will be used for the high-pressure lines larger than 3/8". Hydraulic
components that have pipe threaded ports lines will have a minimum working pressure 300PS. .
2. Pipe fittings: Zinc plated mild steel material. External fittings are painted and protected by
Denso tape or equivalent against corrosion.
3. Hoses: High rubber quality for best resistance against sunlight and salinity, Wire breaded
for applicable specified hydraulic pressure ratings
4. Hose couplings: Zinc plated mild steel material, External couplings are painted and
protected by Denso tape or equivalent against corrosion.

Hydraulic Oil Tank
1. Level gauge with isolating valve (to top cover)
2. Inspection and cleaning cover
3. Filter with fine mesh stainless steel strainer and ventilation
4. A relief valve will be installed in the discharge line of pump.

Cooling Circuit
The air-oil heat exchanger will be provided and sized to ensure continuous operation of
the crane under the ambient temperatures given on the data sheets.

Electric Arrangement
Standards, Codes and Protection
Refer to Codes Of Practice and Standards. The electrical systems onboard the crane
complies with these standards for good offshore electrical design and engineering practices.

Standard Lighting
The following are provided as standard lighting packages for the crane. More lights can be
added according to client's request.

Description : Aviation Warning Light
Qty : 1
Size : 85 W
Location : Boom Tip
Power Supply : UPS

Description : Aviation Warning Light
Qty : 1
Size : 85 W
Location : Mast
Power Supply : UPS

Description : Florescent Access Light (with 90 min back-up battery)
Qty : 2
Size : 2 x 36 W
Location : Access Way Outside Cabin
Power Supply : Main

Description : Florescent Access Light
Qty : 2
Size : 2 x 36 W
Location : Machinery House
Power Supply : Main

Description : Florescent Access Light (with 90 min back-up battery)
Qty : 1
Size : 2 x 18 W
Location : Cabin
Power Supply : Main

Description : Florescent Access Light
Qty : 1
Size : 2 x 18 W
Location : Slew Well
Power Supply : Main

Description : High Pressure Sodium Floodlight
Qty : *
Size : 400 W
Location : Boom
Power Supply : Main

Power Supply
Main Power Supply : 415 VAC , 03 Phase , 50Hz
Uninterrupted Power Supply : 230 VAC , 01 Phase , 50Hz

Others
Junction box(es) is provided at the pedestal interface for connection to client supply.
By default only SS316 junction boxes are installed onboard.

Generally cable wires will be multi-stranded copper and protected against mechanical
damage. All power and control cables are with XLPE/EVA/GSWB/EVA construction.
Occasionally able of XLPE/EVA/CWB/EVA is used when big power cable is part of the
design. All electrical lines are tagged accordingly for ease of maintenance.

All outdoor equipments and instruments are Ingress Protected IP56. Indoor equipments
and instruments are rated with IP44 as minimum.

Ordinarily, the power supply for crane is transmitted from pedestal to slewing platform
through the centre slip ring to ensure the crane can work at any angle.

Controls and Instruments
Cabin :
The following instruments are arranged on the console to permit the operator to maintain an
uninterrupted view of the loads and instrumentation. The two(2) motion controls joysticks
designed according to API-2C, are ergonomically correct and easy to handle. All instruments
are clearly labeled.

1. Motion Control Joysticks:
2. “Dead-Man” Type
- Position sensitive with motion and speed infinitely variable and proportional to movement
from spring-return central position.
- Luff and slew (single left) joystick
- Main and auxiliary hoist (single right) joystick
- Prime Mover Start/Stop Switch
- Prime Mover Emergency Shutdown Switch
- Slew Brake Control Lever for option
- Safe Load Indicator System
- Visual and Audible Annunciator Panel
- Boom Hoist Down Override Switch
- Pressure Gauges: Boast Control / Hoist / Slew / Luff
- Electrical Switches:
- Lighting
- Windshield Wipers & Washer
- Warning Horn
- Air Conditioning
- Main and Auxiliary Hoist selector
- Tachometer

Hoist Mechanisms
Hoist Winch Data
Feature : Hoist Drum
Description - Material, Details : Cast Steel, Remark : 100% NDT
Description : Groove, Remark : Reeving not over 3 layers
Description : Support End, Details : Anti-friction Bearing

Feature : Braking
Description : Type
Details : 1x Band Brake, Remark : Asbestos free lining, for man riding winch only
Details : 1x Multi-disc Brake, Remark : Positive Locking
Details : 1x Load valve, Remark : As dynamic Brake

Description : Safety Factor
Details : Minimum 2.0

Feature : Rope Anchors
Description : Type, Details : Bolted rope clamp, Remarks : For ease of rope replacement
Description : Safety Factor, Details : Minimum 1.1,
Remarks : Ensures rope breaking strength when over loaded

Feature : Ratios
Description : Drum to Rope
Details : Min.19 : 1
Remark : Drum pitch diameter over rope diameter

Feature : Safety
Description : Drum flange beyond top layer,
Details : 2.5 x rope diameter,
Remark : To avoid rope jumping out of drum unintentionally

Description : Fleet angle
Details : < 2.5⁰
Remark : Ensures smooth and even rope spooling at all times

Description : Dead turns on the drum
Details : Min.5
Remark : Amount of rope that is not in used even at the maximum hoist reach of the crane

Luffing System
Feature : Hoist Drum
Description - Material, Details : Cast Steel, Remark : 100% NDT
Description : Groove, Remark : Reeving not over 3 layers
Description : Support End, Details : Anti-friction Bearing

Feature : Braking
Description : Type
Details : 1x Load Brake, Remark : As dynamic Brake
Details : 1x Multi-disc Brake, Remark : Positive Locking
Details : Ratchet and pawl, Remark : Luffing locking device

Description : Safety Factor
Details : Minimum 2.0

Feature : Rope Anchors
Description : Type, Details : Bolted rope clamp,
Remarks : For ease of rope replacement
Description : Safety Factor, Details : Minimum 1.1,
Remarks : Ensures rope breaking strength when over loaded

Feature : Ratios
Description : Drum to Rope
Details : Min.19 : 1
Remark : Drum pitch diameter over rope diameter

Feature : Safety
Description : Drum flange beyond top layer,
Details : 2.5 x rope diameter,
Remark : To avoid rope jumping out of drum unintentionally

Description : Fleet angle
Details : < 2.5⁰
Remark : Ensures smooth and even rope spooling at all times

Description : Dead turns on the drum
Details : Min.5
Remark : Amount of rope that is not in used even at the maximum
hoist reach of the crane

Boom Luffing-in limit buffer
Anti-backward limit is used to prevent the boom over luffing in order to protect boom.

Mast
The Luffing sheaves are placed on the mast (A-frame) which is fitted with a top platform
for maintenance and inspection of the mast head sheaves, luff hoist rope and anchor
connections. Access to the Top Platform is by ladder from the machinery deck. The
mast is pin connected to the machinery deck.

Bridle
N/A

Slew Mechanisms
Slew Bearing
Brand - ROTHE-ERDE XUZHOU or equivalent
Rolling Element - Triple Cylindrical Roller
Lubrication
- Grease holes in diagonal orientation in outer ring
- Lubrication lines are fitted on the machinery deck for refilling grease into the bearing

Slew Drive
Type - Fixed displacement hydraulic motor
Gearbox - Epicyclical
Brake - Oil immersed multi-disc brake(s)
Operating Conditions - Slew design wind speed 24m/s
Pinions - Four(4)
Emergency slewing is possible with one (1) pinion

Boom
Length - 45M & 47M
Type - Reinforced Lattice Structure
Pins - High Tensile
Connectors - Cast Steel
Welding Test - NDT 100% MPI, 100% UT/RT
Boom Top Platform - Both Sides
Safety
Hardwood blocks - To prevent rubbing of ropes on boom bracing damaging paint and
cause unnecessary rusting.
Walkway paths - 760mm wide grating along and inside of boom for maintenance access
Handrails - Along boom section

Boom Bottom
Type - Reinforced Lattice Structure
Material - High tensile low alloy low carbon seamless chords with mild steel bracings

Boom Intermediate Section
Type - Reinforced Lattice Structure
Material - High tensile low alloy low carbon seamless chords
with mild steel bracings.

Boom Head
Type - Reinforced Lattice Structure
Material
- High tensile low alloy low carbon seamless chords
- With Mild Steel Bracings
- High Strength Steel Head Plate

Reeving System
Sheaves
Materials - Steel
Processing Technique - Cast
Ratio - 20 : 1 (Sheave diameter / Rope diameter)
Lubrication - Lubrication through sheave pin
Bearing - Heavy duty sealed cylindrical roller

Ropes
Rope Size (mm)
Design Factor -
Main Hoist and Auxiliary Host : Minimum 5.0
Luff Hoist and Pendant : Minimum 4.0

Rotation Characteristic -
Main Hoist and Auxiliary Host : Non.Rotating
Luff Hoist : Low Rotation
Pendant : Non-Rotating

Construction -
Main Hoist and Auxiliary Host : RH and WSC
Luff Hoist : RH and IWRC
Pendant : WSC

End Connections -
Main Hoist, Auxiliary Host, Luff Hoist and Pendant :
Solid Thimble

Finishing -
Main Hoist, Auxiliary Host, Luff Hoist and Pendant :
Compacted and Galvanized

Hooks
Basic design factor of the hook is more than 4.0. The hooks are made of cast
steel and tested to -40°C, or -6°C below lowest design temperature. All hooks
come with lockable safety latch and swivel bearings. Hook blocks will be of
significant weight to prevent unraveling of rope while unloaded.

Machinery Deck
Machinery Turret
The Turret is made of high strength steel. Depending on crane model and
configuration, most mechanical and control components such as the
Power Pack, Cabin and Winches are placed on the Turret for best
operational efficiency. Kicker plates are installed for safety as well
as handrails around the Turret.

Operator Cabin
Structure - 5 mm steel plate
Floor Area - 1685mm x 1300mm
Position - Port of crane
Acoustic Shield - Noise level during operation ≤ 75 dBA
Weather Shield - Complete sealed through for water runoff

Visionary
Forward Windows - Clear Safety Glass
Side Windows - Clear Safety Glass; open-able
Rear View Mirror - N/A

Safety Equipment
Safety Bar - Front & side windows to prevent accidental fall
Horn - Electric warning horn
Fire Extinguisher - 1.5kg Dry Powder

Accessibility
Headroom - 2.1 meters
Door - Side slip door with lock
Maintenance
- Removable panels for access to cables & hoses
- Rooftop access for air conditioner maintenance
- Side access to front of cabin for window clearing and wiper replacement

Other Accessories
Chair - Fully adjustable cushioned type
Hour Meter - Digital / Analog
Communication -
Equipment (PA Speakers Telephone set, VHF/UHF radios and lound speaker with
microphone system) free issue by shipyard.
Control Console - See Controls and Instruments
Power - Power socket
Lighting - See electrical system
Windshield Wiper - Electrical type
Air Conditioning - Roof top unit
Engraved Stainless Steel Plate
- Design certified load chart
Rope specification chart
- API monogram

Prime Movers
Prime Mover Information
Prime Mover Data – Diesel Engine
Brand : Caterpillar
Model : C3412
Rating : 450KW @ 1800RPM

Starting System -
Primary - Electric : Attempts x seconds
Secondary : Attempts x seconds

Drive Output : Splitter Gearbox
Consumables -
Fuel Grade : ASTM D975 No.2-D Diesel fuel or equivalent
Coolant : ASTM D4985 or equivalent
Lubrication : API CG-4 oils or equivalent

Prime Mover Sizing
The prime mover is appropriately sized for the following conditions:
1 operation @ full load with full speed

Safety Features
Cabin
An annunciator is mounted in the cabin to alert the operator of possible risky
crane operation to avoid unfavorable incidents. This will be a solid state unit “first out” alarm
sequence giving both audible and visual warning and fitting with test and acknowledgement buttons.

The audible and visual alarming signals are provided as following :

- High Return Pressure(filter jammed)
- Hoist Up Limit
- Hoist Down Limit
- Luff Up Limit
- Luff Down Limit with override for stowing
- Engine Overspeed
- Engine Water High Temperature
- Engine Lube Oil Low Pressure
- Engine Fuel Low Pressure
- Hydraulic Temperature High
- Hydraulic low level

Powerpack
The following are provided at the power pack for status monitoring:
- Engine Lube Oil Pressure Gauge - Engine Lube Oil Temperature Gauge
- Engine Fuel Pressure Gauge - Engine Water Temperature Gauge
- Engine Tachometer - Engine Emergency Stop Button
- Fuel Tank Level Switch - Hydraulic Oil Level Gauge
- Hydraulic Pump Cavitations - Hydraulic Pump Filter Indicator

Crane Operation Limit
Limit switches are provided to define safe working limits of all crane operations
including hoisting and luffing.

The functions of the limit switches are :
Operation : Main/Aux. Hoist
Detective Level : Upper Working Limit
Action : Stop Up Motion
Deactivation : Hoist Down

Detective Level : Lower Working Limit
Action : Stop Down Motion
Deactivation : Hoist Up

Operation : Boom Hoist
Detective Level : Lower Working Limit
Action : Stop Boom Down Motion
Deactivation : Boom Up or Override for Stowing

Detective Level : Upper Working Limit
Action : Stop Boom Up Motion and A&V warning
Deactivation : Boom Down

Detective Level : Ultimate Up Limit
Action : Stop Boom Up Motion and A&V warning continued
Deactivation : Boom Down

Luff-in decelerator and stop in limit is controlled by the incoming boom and provides gradual
deceleration until minimum radius. Operation shutdown occurs and luff brakes automatically
engage overriding the manual control in the operator cabin.

Safe Load Indicator
The Safe Load Indicator will provide the following to the operator:

- Crane rated capacity (T)
- Actual load on hooks (T)
- Boom radius (meters)
- Boom angle (Deg rees)
- Visual alarm at 90% SWL
- Intermittent horn at 100% SWL
- Loud continuous horn at 105% SWL
- Overload cut off switch
- Mechanical boom angle installed at the boom where visible from operator cabin

Standard Practises
In line with West Marine mission to deliver good service and quality to the customers,
here are some of the standard practices adopted into existing company operation for
better product quality.

- All ladders are welded with square rungs in diamond orientation with ladder cages.
- All handrails are made of galvanized pipe 48.3mm OD, except those on boom sections
for weight saving purposes
- Cable trays are SS316 perforated. Cables and hoses are secured with SS cable ties.
- All machined pins, end covers, and small adaptors are zinc plated to approximately 15
micron thickness.
- All fasteners M12 and below used are SS304. All fasteners above M12 are Grade 8.8 or
equivalent, fluorocarbon coated.
- Slew bearing fasteners are ISO Grade 10.9, fluorocarbon coated
- Clear labels on all critical equipment onboard
- SS304 and/or white traffolyte with black inscriptions are chosen as standard for labeling

An Emergency Slewing Handle is an emergency crank used to slew the
crane to a safe direction in the event there is a loss of power to the crane.

An Emergency Lowering Hand Pump is provided to lower the load to safe
level in the event there is loss of power to the crane.

A monorail with girder and chain block Maintenance Jib is with provided
to carry out any maintenance work that is required onboard the crane.

Surface Treatement
External Treatment :
Pedestal, crane house and boom -
- Surface preparation to ISO 8501-1, SA 2.5
- First coat zinc rich epoxy primer to 50 µm dry film thickness
- Second coat two pack epoxy to 100 µm dry film thickness
- Third coat polyurethane finish to 65 µm dry film thickness
- Total : three coats to 200 µm dry film thickness

Internal Treatment :
Pedestal and crane house -
- Surface preparation to ISO 8501-1, SA 2.5
- First coat zinc rich epoxy primer to 40 µm dry film thickness
- Second coat two pack epoxy to 75 µm dry film thickness
Oil tank (integrated in crane house) -
- 16.2.2.1 Surface preparation to ISO 8501-1, SA 2.5
- 16.2.2.2 First coat zinc rich epoxy primer to 40 µm dry film thickness
Boom -
No treatment as fully closed steel box structure

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
--------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Lattice Boom Offshore Crane for sale
Offshore Crane - 300 Ton - For Sale
New Offshore Crane for Sale
Offshore Lattice Boom Crane - 300 ton
New Offshore Lattice Boom Crane for Sale
New 300 ton Offshore Crane for Sale
300 ton New Offshore Crane
-------------------------------------------------------------------------------------------------------

Lattice Boom Offshore Crane - 300 Ton Newbuildings

ID 1111

Worldoils Marketplace

Worldrigs ID: WR1108

Krupp Wheeler Excavator Digger for Sale
Used Krupp Wheeler Excavator Digger
1400hp Krupp Wheeler Excavator Digger for Sale

General
1,400 Hp.2
Diesel engines
Some spare parts
Originally bought in 1985 but only worked 3 years
Maintained, engines run monthly
And looks like new

Specifications
Wheel Diameter : 36'1"
Bucket Capacity : 12 Buckets @ 2.4 CY/YD each
Wheel Drive HP : Twin 700 HP Motors (1400 HP)
Rated Capacity : 4000-8500 CY/HR
Wheel Boom Length : 76'1"
Discharge Boom : 88'6" Length
Bucket Discharges per Minute : 61.2
Cutting Face Height : 65.6 ft
Cutting Face Depth : 4.9 ft

Immediate delivery

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
----------------------------------------------------------------------------------------------------
Search words (for official use only) :
Krupp Wheeler Excavator Digger for Sale
Used Krupp Wheeler Excavator Digger
Diesel Engine Krupp Wheeler Excavator Digger for Sale
1985 built Krupp Wheeler Excavator with Spare Parts
Diesel Engine Krupp Wheeler Excavator Digger - 1400hp - For Sale
1400hp Krupp Wheeler Excavator Digger - For Sale
----------------------------------------------------------------------------------------------------

Krupp Wheeler Excavator Digger with Spare Parts - For Sale

ID 1108

Worldoils Marketplace

Versa Drill V2000 Drilling Rig - For Sale

ID 80

Fast Patrol Boats for Sale ibn Mediterranean

Worldoils Marketplace

Worldrigs ID: WR982

Fast Patrol Boats for Sale
Patrol Boats for Sale
42 feet Fast Patrol Boats

Description :

Principal Characteristics
Construction Material : Fiberglass
Hull Form : Planning hull – Deep Vee Mono hull
Length (Loa) : 12.65 m.

Beam (B) : 3.60 m. (at midship)
Draft (D) : 0.75 m. (full load)
Height (D) : 1.80 m. (at midship)
Fuel Capacity (approx.) : 1700 Lit.

Watertight Bulkhead : 4
Cabin Height : 1.85 m
Max. Speed (approx.) : 45 Mile Per Hour
Cont. Speed (approx.) : 40 Mile Per Hour

Endurance (approx.) : 300 mile
DWT : 1250 kg
Accommodations : 12 seat in cabin 4 seat on the aft deck
Crew : 2 persons

Environment : Fully operational up to sea state 2
Class : Dual Class (RINA & Turkish Lloyd)
Class Notation : 100 / A / 1.1 Y
Standards : SOLAS 74, IMO, ISO, TSE, NATO STANAGS

Propulsion
Engine Maker : CATERPILLAR - USA
Model : 3196 TA – E Rating
Power : 2 x 492 KW ( 2x 669 HP) @ 2300 rpm
Gear Box Maker : ZF – Germany / Italy
Model : IRM 312 TS (Two Speed)
Reduction : 1.195 – 1 : 1.432
Drives : ZF Trimax 2200 I
Propeller : SST; 6 blades; ROLLA

Electrical
Rectifier :
VICTRON – SKYLLA 220 VAC, 50 Hz.,
1 Phase (input) 24 V AC (output)

Cables : Marine Type
Batteries : 2 x 200 A. Starter, 2 x 200 A. Service

Fire Fighting
Devices : Remote Controlled CO2 System in Engine Room
Minimaxes : 4 x 1 kg. At Cabin and Cockpit

Navigation :
Radar : JRC Scan Radar
GPS : SIMRAD GPS (Plotter Chart) – CP 32
Fluxgate Compass : SIMRAD – RFC 35 NMEA Compass

Communication
Marine brand VHF : Sailor – RT 2048 / D (Dublex & Simplex)

Weapons
Weapon Foundations : Telescopic at both sides at rear for M-60

General
This boat has been designed for;
• To accomplish the patrol mission various objectives,
• To transport the military personnel to the operation area.

This boat is designed for to be transported via air by plane or helicopter
and via land by a trailer to the operation area.

This boat has been constructed as follows :
• Single deck,
• Sharp and curved bow, perpendicular transom.

The boat has been moulded by fibreglass material. The sections of the boat
are described as follows :

• Fore pik, chain locker under the deck,
• Bow cofferdam,
• Transom cofferdam,
• Bow ballast tanks,
• Personnel cabin,
• Fuel tanks compartment (between two bulk heads),
• Engine room; above aft deck ,
• Aft pick and rudder section.

Ship Building Specification of this boat covers all technical aspects for the
abovementioned objectives and performance. These technical aspects
generally covers all ship building rules, standards, criteria, see keeping,
construction, equipment and material. Also it explains how to apply design,
project and workmanship with the understanding of quality.

During the design aspect and material selection, high reliance and low
maintenance has been fore kept.

The shipyard had done the following :

• Projects
• Design drawings
• Workmanship drawings
• Production coordination services
• Construction
• Production
• Integration
• Quality control
• Get Class Society services
• Material purchasing
• Project management

During the design, construction and production phase of the boat, the
following rules and standards has been applied :

• RINA and Turkish Lloyd (Dual Class)
• TSE
• IMO
• ISO
• SOLAS 74
• NATO (Navy) STANAGS

The project drawings had been approved by RINA, and construction and
production had been surveyed by RINA and Turkish Lloyd (Dual Class), and
the boat has been certified 100 / A / 1.1 / Y class notification.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------------------------------
Search words (for official use only) :
Fast Patrol Boats For Sale
Patrol Boats for shore security
Shore Patrol Boats For Sale
Port Patrol Boats
Coast Gaurding Patrol Boats
Coast Patrolling Boats
Harbour Patrol Boats
Patrol Boats against Piracy
Police Patrol Boats For Sale
Patrol Boats For Sale
42 feet fast Patrolling Boats
---------------------------------------------------------------------------------------------------

Fast Patrol Boats For Sale - 42 feet

ID 982

Worldoils Marketplace

Worldrigs ID: WR223

Crew Boat for Sale
85 Feet Crew Boat
1991 Built Crew Boat for Sale

Built
Year : 1991
Class : American Bureau of Shipping (ABS)

Dimensions
Length overall : 85.00 FT
Breadth : 20.00 FT
Depth : 07.00 FT
Draft loaded : 05.90 FT
Gross tonnage : 89.19 Ton
Net tonnage : 28.00 Ton

Machinery
Main engines : 2 x Detroit Diesel 12 V 71 T1 x 510bhp
Propellers : 2 fixed pitch
Generators : 2 x KATO 120/208 V, 60 Hz, 40 kW each

Speed
Maximum/Cruising : 18/16 knots
Fuel/Stby : 12 ltr/hour

Capacities
Fuel oil : 14,000 Ltrs
Water : 3,000 Ltrs
Free deck space : 50 M2
Deck cargo capacity : 20.00 LT
Accomodation : 6 crew, 21 pax (reclining seats) fully air conditioned

Navigation / Communication
Radar :
1 x Furuno, FR 8050D, Range 48 NM
1 x Furuno 1830
Echo sounder : 1 x Raytheon 420
Magnetic compass : 1 x Ritchie Mode C 453
Satellite navigation (GPS) : 1 x Koden - KGP 910
SSB radio : 1 x ICOM IC-M700
VHF radio : 2 x Sailor RT 144C
Gyro Compass : 1 x Sperry-SR-50-Mod-1
Depth Sounder : Datamarine 3000

Fire Fighting/ Safety
Monitors : NA
Pump capacity : NA
Safety Equipment as per SOLAS, Flag and Class Soceity requirement

Fuel Consumption
Max speed : 190 ltrs/hrs
Cruising speed : 180 ltrs/hrs

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------
Search words(for official use only) :
Crew Boat for sale
85FT Crew Boat for Sale
Crew Boat in Asia for sale
Crew Boat 1991 Built for sale
1991 built Crew Boat for Sale
21pax crew boat
----------------------------------------------------------

Crew Boat for Sale - 1991 built 26m 21pax

ID 223

30,000 Gallon NGL/LPG Propane Storage Vessels

Worldoils Marketplace

Worldrigs ID: WR1771

NGL/LPG Propane Storage Vessels for Sale
New 30,000 Gallon NGL/LPG Propane Storage Vessels

Description
Quantity : 10
Year : 2015
Dimensions : 132" OD x 47' OAL
Pressure : 250 psi

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------------------------------------------------------
Search words(for official use only) :
30,000 Gallon NGL/LPG Propane Storage Vessels for Sale
2015 Built for Sale
Newly Manufactured 30,000 Gallon NGL/LPG Storage Tanks
New NGL/LPG Propane StorageTanks for Sale
LPG Storage tanks for Sale
30,000 Gallon NGL/LPG Propane Tanks for Sale
NGL/LPG Propane Storage Vessels
30,000 Gallon Capacity LPG Tank for Sale
10 New NGL/LPG Propane Storage Vessels
-------------------------------------------------------------------------------------------------------------------------------

Newly Manufactured 30,000 Gallon NGL/LPG Propane Storage Vessels for Sale

ID 1771

Worldoils Marketplace

Worldrigs ID: WR390

Tugboat for Sale
1440hp Tugboat For Sale
2000 built Tugboat for sale

General
Type of Vessel : Steel Tugboat
Year Built : 2000
Class : NKK

Specifications
Registered Length : 24.34 M
Breadth : 7.92 M
Depth : 3.65 M
GRT / NRT : 184 / 56
Main Engine : 2 x 537kW Caterpillar Diesel Engine
Estimated Speed : 15 knots

The above are subject to vessels availability at the time of inspection & confirmation.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Towing Tug for sale
1440bhp Twin Screw Towing Tug for Sale
2000 built Towing Tug for sale in Singapore
Used Towing Tug for sale in Asia
Towing Tug from Malaysia
1440 bhp Twin Screw Tug - 2000 built
Tugs for Trinidad
Tugs for Mexico
Tugs for South America
-------------------------------------------------------------------------------------------------------

Tugboat 1440HP - for sale

ID 390

Worldoils Marketplace

Ingersoll-Rand CM-780D Blasthole Drilling Rig - For Sale

ID 2722

Worldoils Marketplace

Offshore Supply Vessel - 2000 Built - For Sale

ID 2888

KREMCO K 600 Double - 4200m Workover Rig

Worldoils Marketplace

Worldrigs ID: WR637

Kremco K 600 Double - 4200m - Used Workover Rig - For Sale
Workover Rigs For Sale
4200m Used Workover Rigs For Sale

Kremco K600 Skid Double Class III
Four axle, self-propelled, double drum,
back in rig
4200 m x 73 mm tubing
12.7 liter 60 series detroit diesel rated at 450 hp engine
Allison CLBT-5860 five speed transmission
25.4 cm x 106.7 cm main drum c/w
60.9 cm model 124 eaton brake
20.3 cm x 106.7 cm sand line brakes
31.7 meters kremco model 103-217
mast with a pressure rating of 96,522 daN and 6 lines
4200 m x 73 mm tubing and 3000 meters sucker rods
Ideco 110 ton Shorty travel blocks
Fluorescent lighting
1” drilling line
4000 m x 12.7 mm swedge sand line
Hydraulic weight indicator
Dual winches

Combination :
10.99 x 3.03 skid change house
7.33 m x 3.03 m tool house accumulator portion
John Deere 55 kW generator

Handling equipment :
58-93R foster tubing tongs
Cavins TC 101 air slips
BJ, oil country, diehl elevators
60.3 mm, 73 mm & 88.9 mm standard tubing sizes
5/8” and 1” rod sizes
2 – 8 x 45 and 2 – 6 x 16 rig mats
Skid cat walk & 4 tumble racks

Safety equipment :
4 - 18 kg fire extinguishers- quantity and size
2 – Scott SCBA self-contained breathing apparatuses
Industrial Scientific, M40 and Lumidor,
Impact Pro ZEL 0607388 gas detector
Safety and directional signs

Electrical ground bonding equipment
Stretcher
Crown saver
60.3 mm, 73 mm & 88.9 mm pipe ram
1 self-retracting life lines

BOP equipment :
Class III
Townsend, 35 MPA double-gate and a shaffer, 35 MPA annular
80 gallon (30 liters) accumulator with a tank size of
140 gallon w/ 3 control and a remote at combination building
73 mm safety valve with a pressure rating of 35 Mpa
76.2 mm rod BOP
76.2 mm 6 m swab lubricator c/w tool trap
73 mm gate valve

Pump :
Skid pump
10.16 cm x 12.7 cm National JWS-300 triplex with a
pressure rating of 35 mpa
Detroit 8V71 300 hp engine
Spicer 5 speed manual transmission
3 x 2 x 13 mission magnum I charger pump
7 valve manifold with a pressure rating of 35 Mpa

Mud tank :
35 M3 mud tank c/w mud guns, mixing hopper and settling trough
20 - 5.08 cm X 6 m line pipe and suction hose
Poor boy degasser
External gauge

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words(for official use only) -
Kremco K 600 Double - 4200m Used Workover Rig for sale
Workover Land Rigs in USA
Used 4200m Kremco K 600 Double Workover Rig for Sale
Land Workover Rigs For Sale
Used American Workover Rigs
Workover Rig for sale
Kremco K 600 Double (4200m) for sale
-----------------------------------------------------------------------------------------------------------

Kremco K 600 Double - 4200m - Used - Workover Rig - For Sale

ID 637

Worldoils Marketplace

Worldrigs ID: WR268

Speedstar 275 Quickdrill Drilling Rig For Sale
Used Drilling Rig 1986 Built for Sale

Model : 275 Quickdrill Rig
Manufacturer : Speedstar
Year : 1986
Condition : Used

Description :

1986 Speedstar 275 Quickdrill Rig
4X3X13 Centrifugal Mud Pump
Leroi compressor 50SDS (rebuilt in 2000)
Main Winch & Sandline
Single Rod Loader
Rod Rack
(16) 2-3/8" IF x 15' ft drill pipe and 6" inch stabilizer
Mud pan and suction line
4 hydraulic leveling jacks
Mounted on a newer 1992 GMC Topkick Truck
CAT Diesel Engine
10 Speed Transmission
4 newer rear tires
203000 miles

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------
Search words(for official use only) -
Speedstar 275 Quickdrill Rig for sale
Drilling Rig - Speedstar 275 Quickdrill
Used Drilling Rig for sale
Speedstar 275 Quickdrill Drilling Rig for Sale in USA
1986 Built Speedstar 275 Quickdrill
------------------------------------------------------------------------------------------------------------

Speedstar 275 Quickdrill Rig for Sale

ID 268

Ingersoll-Rand T3W DH (Deep Hole) for Sale

Worldoils Marketplace

Worldrigs ID: WR1037

Ingersoll-Rand T3W DH (Deep Hole) Drill Rig for Sale
1998 Built Ingersoll-Rand T3W Deep Hole Drill Rig

Model : T3W DH (Deep Hole)
Manufacturer : Ingersoll-Rand
Year : 1998
Condition : Used

Description:

1998 Ingersoll-Rand T3W DH (Deep Hole)
CAT 3406 Deck Engine (9,000 Hours)
30,000 Lbs of Pullback
IR 900 CFM @ 350 PSI Air Compressor
18,000 Lbs Winch
High Torque Head
Diesel Preheater (Works)
9 GPM Bean Water Injection
Hammer Oiler
7 Rod Carousel Standing
260' ft of Side Carousel Lay-Down
Installed : New Pullback Cylinder, Head Rollers, And Sheave Bushings Less Than 150 hr ago
1,000’ ft of (3 ½ API X 20') Drill Pipe & Basic Tooling Included

Mounted on an International 2674 Truck

CAT C-10 Diesel Engine @ 310 HP
10 Speed Transmission
Jake Brakes
Rear Lockers
25,000 miles as of 7-1-2012
20k Front Axel 40k Rear Axel

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1998 Built Ingersoll-Rand T3W DH Drilling Rig for Sale
Used Drilling Rig Ingersoll-Rand for Sale
Ingersoll-Rand Deep Hole Drilling Rig for Sale in USA
1998 Built Ingersoll-Rand T3W DH (Deep Hole) Drill Rig for Sale
Land Drilling Rig For Sale - 1998 built
------------------------------------------------------------------------------------------------------------------

Ingersoll-Rand T3W DH (Deep Hole) for Sale - 1998 Built

ID 1037

Worldoils Marketplace

Worldrigs ID: WR170

Ocean Going Tug - 3200 BHP for sale
2005 Built Tug for Sale

Description
Class : American Bureau of Shipping
Classification : A1 AMS Tug Circle E Towing
Year Built : 2005

Length O.A. : 29.00m
Breadth Moulded : 9.00m
Depth Moulded : 4.25m
Draft (Designed) : 3.50m

Main Engines : 2 x 1,600 BHP Cummins @ 1,800 rpm Total: 3,200 BHP
Maximum Speed : 12 knots free running
Fuel Consumption : 85% at 205 lts/hr/eng
Endurance: 18 days approximately
Fuel Oil : 250 m³
Fresh Water : 36 m³
Dirty Oil : 3.60 m³
L.O. Storage : 3.60 m³

Towing Winch : 1 x 30 MT – 44mm dia towing wire of 700m length
Bollard Pull : Approx. 40MT (static)
Internal Fire-fighting : Fully complies with SOLAS requirement.
Accommodation : Air-conditioned for total 12 persons

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------
Search words(for official use only) :
Ocean Going Tug for Sale
3200 bhp Tug for sale
Tug for sale
2005 Built Tug for sale
--------------------------------------------------------

Ocean Going Tug - for sale

ID 170

Worldoils Marketplace

Worldrigs ID: WR499

ASD Tug For Sale
4400BHP MULTI-PURPOSE ASD TUG

Main Particulars :
Length O.A. : 30m
Length B.P. : 25.2m
Beam MLD. : 10.8m
Depth MLD. : 5.4m
Crew : 12
Design Draft : 3.6m
Max Draft : 4.7m
GRT : 469
NRT : 140

Classification Notation :
BVⅠ Hull Mach, Salvage Tug / Utility Boat / Fire Fighting Ship 1
unrestricted navigation

Year Built : 2010

Main Capacity :
FO : ~267m3
FW : ~80m3
Fi-Fi Foam : 18.16m3
Spilled Oil Dispersant : 4.5m3
Lube Oil : 1.0m3

Anchoring and Towing Equipment :
-Single Reel Hydraulic Towing Winch Set :
Maker : Plimsoll - Singapore
Capacity(Steel Wire) : φ46mm×770M
Brake Holding : 150 MT
Rated pull : 20MT@0~10M/min and 5MT@0~30M/min
Hydraulic emergency release

-Hydraulic Anchor/Escort (Towing) Winch Set :
Maker : Plimsoll - Singapore
Anchor weight : 2 × 570 kg
Diameter of anchor chain : Φ20.5 mm
Rated hauling speed : 1.83MT@0~15M/min
Capacity(P.P. Wire) : φ100mm×110M
Brake Holding : 120 MT
Rated pull : 18MT @ 0~10 M/min

- Electro-hydraulic collapsible mast : 1set

Main Machinery & Propulsion Unit :
Main Engine Sets : CUMMINS – USA-UK
- Power 2,200 BHP @1,800rpm/min
- Model CUMMINS QSK60-M
- Quantity Two Sets

Marine Gen. Sets CATERPILLAR – USA
- Model CATERPILLAR 3406MGS
- Power 245eKW /400V/50HZ/ 3Φ
- Quantity Two Sets

Harbour Genset 1×DuFong-CUMMINS CCFJ-60J– US-China
- Power 60KW /400V/50HZ/ 3Φ

Marine Crane SQ8ZB3
- Max. Lifting SWL0.98MT@12M/ 8MT@2M
- Quantity One Set

ASD Propellers
- Model AQUAMASTER US205MK2 FP
- Maker ROLLS ROYCE – Finland
- Quantity : One set

Bow Thruster 1×STT110L-FP
Power 90KW

Oily Water Separator 0.25M3 x One Set

Sewage Treatment 20-22 persons
Plant One Set

External FIFI System (SOLAS – FIFI 1 Class)
- Firefighting Monitor 2×1200/300M3/hr(water/foam),
range120/70M(water/foam) height water throwing 50M(water)
- Firefighting Pump 1×2400M3@1.17MPa
- Maker FFS – Norwegian
F.O. Separator 1 x 1500L/h

Lifesavng and FiFi Equipment :
- In compliance with the SOLAS requirements, Hong
Kong merchant shipping ordinance and class notation
requirements as regards Lifesaving & FiFi equipment.
- CO2 System as per BV Rules
- 8 x Life buoy; 16 x Life jacket; 2 x 15persons Liferaft;
Portable Fire Extinguisher : 11 x 9kg foam; 6 x 5 kg CO2; 9
x 6kg Dry Powder; 1x 45 L Foam Fire Extinguisher
(cart-pushing); 4 sets fireman outfit with breathing
apparatus; 2 sets breathing apparatus of artificer diver; 2
sets gas mask with filter; 4 sets flood protection unit of1M
x 2M; 12 x parachute distress rocket; 2 x Orange Smoke
signal; 6 x Floating Light
- Salvage and support Pump ability : 100M3/h & 90M3/h
- Electric Fifi General Pump ability : 25M3/hr
- Spare Electric Fifi Pump ability : 25M3/hr
- Spilled Oil Dispersant System

Main Radio & Navigation Equipment :
Radar 1×FR-1510MK3
Echo Sounder 1×Furuno FE-700
Speed Log 1×Furuno DS-80
Anemometer 1×Furuno FI-50
GPS 1×Furuno GP-150
Electrical Horn 1×Yahagi E3M-24
Autopilot 1×Alphaseapilot MFC
Vertical Standard Magnetic Compass 1×CPL-165
Steering Magnetic Compass 1×CPT-130
Sound Power Tele. 1×12KSL
Public address system 1×KSGB-JQ
AIS 1×Furuno FA-150

A3 sea GMDSS
MF/HF SSB 1×Furuno FS-2570
Inmarsat-C(SSAS) 1×FELCOM-15(IC-307)
Inmarsat-C 1×FELCOM-15
VHF telephone 2×Furuno FM-8800S
NAVTEX 1×Furuno NX-700B
SART 1×Pathfinder 3 SART
EPIRB 1×ACR RLB-32
Portable VHF 2×ACR SR-102

Air Conditioning System :
-Equipped centralized air- conditioning for
Wheelhouse, Mess Room, Captain’s and Chief
Eng. Room and other crew room.
-Equipped split-type air handling unit for
engine room centralized control room and
split-type air- conditioner for wheelhouse.

Accommondation & main living facility
2×Senior Officer Cabin for single
1×Senior Officer Cabin for two men
2×Crew Cabin for four men
1×Assemble-type Provisions Freezer
2×Twin Head-type Induction Hob
1×Berlin centralized electric water heater
1×Cleemann Captain Chair – Germany
- Model : Nautic D GZ
- Material : Synthesized leather
- Width : 610mm
- Height : Min558mm / Max718mm
- Length of rail : 2200mm

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words(for official use only) -
ASD Tug For Sale
4000bhp ASD Tug For Sale
4400hp ASD Tug For sale
ASD Tug For Sale in Singapore, Malaysia, Indonesia
ASD Tug For Sale in Middle East, India
-------------------------------------------------------------------------------------------------------

ASD Tug For Sale - 4400BHP MULTI-PURPOSE ASD TUG

ID 499

Worldoils Marketplace

Worldrigs ID: WR1163

Name of the Report :
Diesel Generator Market - Global Market Size,
Equipment Share and Competitive Analysis to 2020

Published Date : 20-Jun-2014
No. of pages : 90

Table of Contents

1 Table of Contents
1 Table of Contents… 4
1.1 List of Tables… 7
1.2 List of Figures… 9
2 Introduction… 11
2.1 Diesel Generator, Overview… 11
2.1.1 End-user Classification… 11
2.1.2 Voltage Classification… 11
2.1.3 Technologies 11
2.2 Report Guidance… 12
3 Global: Diesel Generator Market… 13
3.1 Overview… 13
3.1.1 Regional Segmentation of Diesel Generator Market, 2013… 13
3.1.2 Global, Diesel Generator Market, Drivers… 15
3.1.3 Global, Diesel Generator Market, Restraints… 17
3.2 Global Diesel Generator Market… 19
4 Diesel Generator Market, the US… 22
4.1 Overview… 22
4.1.1 Diesel Generator Market, US, Drivers and Restraints… 23
4.1.2 Diesel Generator Market, US, Drivers… 24
4.1.3 Diesel Generator Market, US, Restraints… 25
4.2 Diesel Generator Market, US, Revenues… 26
4.2.1 Diesel Generator Market, US, End-user Segmentation, 2013… 28
4.2.2 Diesel Generator Market, US, Breakdown of Total Rental Revenue by Voltage Level… 30
4.3 Diesel Generator Market, US, Market Share of Major Diesel Generator Manufacturers,
2012… 32
5 Diesel Generator Market, China… 34
5.1 Overview… 34
5.1.1 Diesel Generator Market, China, Drivers and Restraints… 35
5.1.2 Diesel Generator Market, China, Drivers… 35
5.1.3 Diesel Generator Market, China, Restraints… 37
5.2 Diesel Generator Market, China, Revenues… 37
5.2.1 Diesel Generator Market, China, End-user Segmentation, 2013… 39
5.2.2 Diesel Generator Market, China, Breakdown of Total Revenue by Voltage Level… 40
5.3 Diesel Generator Market, China, Market Share of Major Diesel-Generator Manufacturers,
2012… 42
6 Diesel Generator Market, India… 44
6.1 Overview… 44
6.1.1 Diesel Generator Market, India, Drivers and Restraints… 45
6.1.2 India, Diesel Generator Market, Drivers… 46
6.1.3 India, Diesel Generator Market, Restraints… 47
6.2 Diesel Generator Market, India, Revenues… 47
6.2.1 Diesel Generator Market, India, End-user Segmentation, 2014… 49
6.2.2 Diesel Generator Market, India, Breakdown of Total Rental Revenue by Voltage
Level… 50
6.3 Diesel Generator Market, India, Market Share of Major Diesel-Generator Manufacturers,
2013… 52
7 Diesel Generator Market, Nigeria… 54
7.1 Overview… 54
7.1.1 Diesel Generator Market, Nigeria, Drivers and Restraints… 55
7.1.2 Diesel Generator Market, Nigeria, Drivers… 55
7.1.3 Diesel Generator Market, Nigeria, Restraints… 56
7.2 Diesel Generator Market, Nigeria, Revenues… 56
7.2.1 Diesel Generator Market, Nigeria, End-user Segmentation, 2013… 58
7.2.2 Diesel Generator Market, Nigeria, Total Rental Revenue by Voltage Level… 60
7.3 Diesel Generator Market, Nigeria, Market Share of Major Diesel Generator Manufacturers,
2013… 62
8 Diesel Generator Market, South Africa… 64
8.1 Overview… 64
8.1.1 Diesel Generator Market, South Africa, Drivers and Restraints… 65
8.1.2 Diesel Generator Market, South Africa, Drivers… 66
8.1.3 Diesel Generator Market, South Africa, Restraints… 67
8.2 Diesel Generator Market, South Africa, Revenues… 68
8.2.1 Diesel Generator Market, South Africa, End-user Segmentation, 2013… 69
8.2.2 Diesel Generator Market, South Africa, Breakdown of Total Rental Revenue by Voltage
Level… 70
8.3 Diesel Generator Market, South Africa, Market Share of Major Diesel Generator
Manufacturers, 2013… 72
9 Diesel Generator Market, UK… 74
9.1 Overview… 74
9.1.1 Diesel Generator Market, UK, Drivers and Restraints… 75
9.1.2 Diesel Generator Market, UK, Drivers… 76
9.1.3 Diesel Generator Market, UK, Restraints… 76
9.2 Diesel Generator Market, UK, Revenues… 77
9.2.1 Diesel Generator Market, UK, End-user Segmentation, 2014… 79
9.2.2 Diesel Generator Market, UK, Breakdown of Total Revenue by Voltage Level… 80
9.3 Diesel Generator Market, UK, Market Share of Major Diesel Generator Manufacturers,
2013… 82

List of Tables

1.1 List of Tables
Table 1: Global Diesel Generator Market, Regional Segmentation (%), 2013… 14
Table 2: Diesel Generator Market, Global, Revenue Forecast ($bn), 2006-2020… 21
Table 3: Diesel Generator Market, US, Revenue Forecast ($bn), 2006-2020… 28
Table 4: Diesel Generator Market, US, End-user Segmentation (%), 2013… 29
Table 5: Diesel Generator Market, US, Low and High-voltage Revenue Forecast ($m),
2006-2020… 32
Table 6: Diesel Generator Market, US, Market Share of Major Diesel Generator
Manufacturers (%), 2013… 33
Table 7: Diesel Generator Market, China, Revenue Forecast ($bn), 2006-2020… 39
Table 8: Diesel Generator Market, China, End-user Segmentation (%), 2013… 40
Table 9: Diesel Generator Market, China, Low, Medium and High-voltage Revenue
Forecast ($m), 2006-2020… 42
Table 10: Diesel Generator Market, China, Market Share of Major Diesel Generator
Manufacturers (%), 2013… 43
Table 11: Diesel Generator Market, India, Revenue Forecast ($bn), 2006-2020… 49
Table 12: Diesel Generator Market, India, End-user Segmentation (%), 2014… 50
Table 13: Diesel Generator Market, India, Low, Medium and High-voltage Revenue
Forecast ($m), 2006-2020… 52
Table 14: Diesel Generator Market, India, Competitive Landscape (%), 2013… 53
Table 15: Diesel Generator Market, Nigeria, Revenue Forecast ($m), 2006-2020… 58
Table 16: Diesel Generator Market, Nigeria, End-user Segmentation (%), 2013… 59
Table 17: Diesel Generator Market, Nigeria, Low, Medium and High-voltage Revenue
Forecast ($m), 2006-2020… 62
Table 18: Diesel Generator Market, Nigeria, Market Share of Major Diesel Generator
Manufacturers (%), 2013… 63
Table 19: Diesel Generator Market, South Africa, Revenue Forecast ($m),
2006-2020… 69
Table 20: Diesel Generator Market, South Africa, End-user Segmentation,
2013… 70
Table 21: Diesel Generator Market, South Africa, Low, Medium and High-voltage
Revenue Forecast ($m), 2006-2020… 72
Table 22: Diesel Generator Market, South Africa, Market Share of Major Diesel
Generator Manufacturers (%), 2013… 73
Table 23: Diesel Generator Market, UK, Revenue Forecast ($m), 2006-2020… 79
Table 24: Diesel Generator Market, UK, End-user segmentation (%), 2014… 80
Table 25: Diesel Generator Market, UK, Low, Medium and High-voltage Revenue
Forecast ($m), 2006-2020… 82
Table 26: Diesel Generator Market, UK, Competitive Landscape (%), 2013… 83
Table 27: Abbreviations… 85

List of Figures

1.2 List of Figures
Figure 1: Diesel Generator Market, Regional Segmentation (%), 2013… 14
Figure 2: Diesel Generator Market, Global, Drivers, 2014… 15
Figure 3: Diesel Generator Market, Global, Restraints, 2014… 17
Figure 4: Diesel Generator Market, Global, Revenue Forecast ($bn), 2006-2020… 20
Figure 5: Diesel Generator Market, the US, Drivers and Restraints, 2014… 23
Figure 6: Diesel Generator Market, US, Revenue Forecast ($bn), 2006-2020… 27
Figure 7: Diesel Generator Market, US, End-user Segmentation (%), 2013… 29
Figure 8: Diesel Generator Market, US, Low and High-voltage Revenue Forecast
($bn), 2006-2020… 31
Figure 9: Diesel Generator Market, US, Market Share of Major Diesel Generator
Manufacturers (%), 2013… 33
Figure 10: Diesel Generator Market, China, Drivers and Restraints, 2014… 35
Figure 11: Diesel Generator Market, China, Revenue Forecast ($bn), 2006-2020… 38
Figure 12: Diesel Generator Market, China, End-user Segmentation (%), 2013… 40
Figure 13: Diesel Generator Market, China, Low, Medium and High-voltage Revenue
Forecast ($m), 2006-2020… 41
Figure 14: Diesel Generator Market, China, Market Share of Major Diesel Generator
Manufacturers (%), 2013… 43
Figure 15: Diesel Generator Market, India, Drivers and Restraints, 2014… 45
Figure 16: Diesel Generator Market, India, Revenue Forecast ($bn), 2006-2020… 48
Figure 17: Diesel Generator Market, India, End-user Segmentation (%), 2014… 50
Figure 18: Diesel Generator Market, India, Low, Medium and High-voltage Revenue
Forecast ($m), 2006-2020… 51
Figure 19: Diesel Generator Market, India, Competitive Landscape (%), 2013… 53
Figure 20: Diesel Generator Market, Nigeria, Drivers and Restraints, 2014… 55
Figure 21: Diesel Generator Market, Nigeria, Revenue Forecast ($m), 2006-2020… 57
Figure 22: Diesel Generator Market, Nigeria, End-user Segmentation (%), 2013… 59
Figure 23: Diesel Generator Market, Nigeria, Low, Medium and High-voltage
Revenue Forecast ($m), 2006-2020… 61
Figure 24: Diesel Generator Market, Nigeria, Market Share of Major Diesel Generator
Manufacturers (%), 2013… 63
Figure 25: Diesel Generator Market, South Africa, Drivers and Restraints, 2013… 65
Figure 26: Diesel Generator Market, South Africa, Revenue Forecast ($m),
2006-2020… 68
Figure 27: Diesel Generator Market, South Africa, End-user Segmentation (%),
2013… 70
Figure 28: Diesel Generator Market, South Africa, Low, Medium and High-voltage
Revenue Forecast ($m), 2006-2020… 71
Figure 29: Diesel Generator Market, South Africa, Market Share of Major Diesel
Generator Manufacturers (%), 2013… 73
Figure 30: Diesel Generator Market, UK, Drivers and Restraints, 2014… 75
Figure 31: Diesel Generator Market, UK, Revenue Forecast ($m), 2006-2020… 78
Figure 32: Diesel Generator Market, UK, End-user Segmentation (%), 2014… 80
Figure 33: Diesel Generator Market, UK, Low, Medium and High-voltage Revenue
Forecast ($m), 2006-2020… 81
Figure 34: Diesel Generator Market, UK, Competitive Landscape (%), 2013… 83

Summary

This“Diesel Generator Market - Global Market Size, Equipment Share and
Competitive Analysis to 2020” gives detailed information on the
diesel generator market, focusing on the US, China, India, Nigeria,
South Africa and the UK. The report covers all the six countries
for the diesel generator market. Drivers, restraints, revenue forecast,
segmentation of revenue by capacity level; end user segmentation and
market share analysis are covered at the country level.

Scope

- The report provides detailed analysis of the diesel generator
market in different countries. It’s scope includes the global market and
the US, China, India, Nigeria, South Africa and the UK.
- Historical (2006-2013) and forecasted data (2014-2020) on the market revenues.
Segmentation of market revenues by capacity level is also provided.
- Diesel generator market drivers and restraints for these countries.
- Market share analysis of the key players for all the countries.

Reasons to buy

- Facilitate decision-making based on historic and
forecast data for diesel generator market revenues.
- Develop strategies based on the various market developments
related to the diesel generator industry.
- Identify key partners and business development avenues
based on the understanding of the market movements of the major
competitors in the diesel generator market.
- Respond to your competitors’ business structure, strategy and prospects.

Price

Single User Price : $3,995
Site License Price : $7,990
Enterprisewide Price (Global Site License) : $11,985

Disclaimer
All Rights Reserved.

No part of this publication may be reproduced, stored in a retrieval system or transmitted
in any form by any means, electronic, mechanical, photocopying, recording or otherwise,
without the prior permission of the publisher.

The facts of this report are believed to be correct at the time of publication but cannot be
guaranteed. Please note that the findings, conclusions and recommendations that the
publisher delivers will be based on information gathered in good faith from both primary
and secondary sources, whose accuracy we are not always in a position to guarantee.
As such the publisher accept no liability whatever for actions taken based on any
information that may subsequently prove to be incorrect.

To order this report, please send an email to mail@worldoils.com

-------------------------------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Regional Segmentation of Diesel Generator Market
Diesel Generator Market, US, Drivers and Restraints
Diesel Generator Market, US, End-user Segmentation
Diesel Generator Market, China, Revenues
India, Diesel Generator Market, Restraints
Diesel Generator Market, UK, End-user Segmentation
Diesel Generator Market, South Africa, End-user Segmentation
-------------------------------------------------------------------------------------------------------------

Diesel Generator Market - Global Market Size, Equipment Share and Competitive Analysis to 2020

ID 1163

Worldoils Marketplace

D11N Crawler Tractor For Sale

ID 610

Worldoils Marketplace

Diedrich D120 Drilling Rig - For Sale

ID 2684

Worldoils Marketplace

65 Pax Fast Supply Vessel for sale

ID 2581

Worldoils Marketplace

Worldrigs ID: WR655

Jackup Drilling Package For Sale
Rig Drilling Package
Used Drilling Package from a Rig For Sale
Offshore Drilling Package

This is a offshore driling package.

Offshore Drilling Package
Used Drilling Package from a Rig For Sale
Used Drilling Package for Sale
Rig Drilling Package

This is a drilling package including derrick, cantilever, texas deck etc,
which is coming available to the market because the drilling rig is
going to be converted into an accommodation rig.

Used Rig Drilling Package for Sale

A.1.1.1 Rig Floor Winches (Non Man-riding)
Quantity no. : 2
Make : Ingersol Rand
Type : K5UL
Rated capacity lbs : 5,000
Wire diameter inch : 1/2

A.1.1.2 Monkey Board Work Winch
Quantity no. : 1
Make : Ingersol Rand
Type : Airdyne
Rated capacity lbs : 1 ton
Wire diameter inch : 3/8
Automatic brakes yes/no : Yes
Overload protection yes/no : No
Quantity no. : 1
Make : Ingersol Rand
Type : Pullstar PS 1000R
Rated capacity lbs : 1 ton
Wire diameter inch : 3/8
Automatic brakes yes/no : Yes
Overload protection yes/no : No

A.1.1.3 Rig Floor "Man-Riding" Winch (Utility)
Quantity no. : 2
Make : RAM
Type : ML336 Catalina
Rated capacity lbs : 330
Wire diameter inch : 3/8”
Non-twisted wire yes/no : Yes
Automatic brakes yes/no : Yes
Overload protection yes/no : Yes
Automatic spooling yes/no : Yes
Certified for man-riding yes/no : Yes

A.1.1.3.1 BOP Service Area “Man-Riding” Winch(Utility)
Quantity no. : 2
Make : Ingersol Rand
Type : FA 150K Gi
Rated capacity lbs : 330
Wire diameter inch : 3/8”
Non-twisted wire yes/no : Yes
Automatic brakes yes/no : Yes
Overload protection yes/no : Yes
Automatic spooling yes/no : Yes
Certified for man-riding yes/no : Yes

A.1.1.4 Utility Winch (ie Deck Winch)
Quantity no. : 6
Make : Ingersol Rand
Type : K5UL
Rated capacity lbs : 10,000
Wire diameter inch : 3/4
Automatic brakes yes/no : No
Overload protection yes/no : No
Automatic spooling yes/no : No
Certified for man-riding yes/no : No Locations :

A.1.1.5 BOP Hoists (see E.10.1)
Quantity no. : 2
Make : BEEBE
Type : Overhead Bridge Crane
Rated capacity st : 37.5 tons / Crane
Location : Underside of drill package

B General Rig Specifications

B.1 Derrick and Substructure

B.1.1 Derrick/Mast
Make/type : Joseph Paris
Rated for windspeed
- With full set back knots : 100
- With no set back knots : 100
Height ft : 162
Dimensions of base ft x ft : 36 x 36
Dimension of crown ft x ft : 18 x 18
Gross nominal capacity lbs : 1,485,714
Static hook load lbs : 1,300,000
Maximum number of lines no. : 14 (12 in use)
Ladders with safety cages and rests yes/no : Yes
Platform for crown sheaves access yes/no : Yes
Counter balance, system for rig tongs
pipe spinning tong yes/no : Yes
Lighting system explosion proof yes/no : Yes

B.1.2 Racking Platform
Make/type : Total capacity-drill pipe :
- 5" DP ft : 20,000
- 6-5/8" DP ft : 9,000
- 3-1/2" DP ft : 20,000

Total capacity-drill collars :

- 8" DC ft : 7 stands
- 9" DC ft : 3 stands

Tubing Bellyboard yes/no : No

B.1.3 Substructure
Make/type : CFEM
Drill floor height (above main deck) ft : 37.35
Width ft : 77.34
Length ft : 44.57
Setback capacity kips : 606
Simultaneous setback-hookload capacitykips : 1,200
Rotary beam capacity (total) kips : 903
Clear height below R/table beams (to main deck) ft :

B.1.4 Weather Proofing
Rig floor windbreaks yes/no : Yes
- Height ft :
Derrickman windbreaks yes/no : Yes
- Height ft :
Around process pits yes/no : Yes
- Height ft :

B.1.5 Derrick TV Camera System
Camera located at : Monkey board level in derrick
Make/type : Ocular 12EX PTZ EExd Camera
Zoom/pan/tilt-function yes/no : Yes
Monitor located at : Drillers house (Ocular 4M EEx de 11G T6 Monitor)
Camera located at : Stabbing board level
Make/type : Ocular 12EX PTZ EExd Camera
Zoom/pan/tilt-function yes/no : Yes
Monitor located at : Drillers house (Ocular 4M EEx de 11G T6 Monitor)

B.2 Drawworks and Associated Equipment

B.2.1   Drawworks
Make/type : National 1625 DE
Motors make/type : Jeumont Schneider DC 752
- Quantity no. : 2
- Rated input power hp : 1,000
Motors make/type : GE DC 752
- Quantity no. : 1
- Rated input power hp : 1,000
Drum size (dia & length) in x in : 36 x 61-1/2
Drum type (grooved/smooth) : Grooved
- For drill line size in : 1-1/2
Brake type (disc/drum) : Drum
Max line pull (12 lines) lbs : 1,250
Max line pull (10 lines) lbs : 1,075
Max line pull (8 lines) lbs : 880
Makeup cathead type : Foster
Breakout cathead type : Foster

Crown block safety device :
- Make/type : National Crown-o-Matic
Independent fresh water cooling system
for drawworks and electric brake yes/no : Yes
Automatic driller yes/no : No :

B.2.2   Auxiliary Brake
Make : Elmagco
Model : 7838
Independent back-up system type : KEMS

B.3 Derrick Hoisting Equipment

B.3.1   Crown Block
Make/type : Joseph Paris (overhauled)
Rated capacity st : 715
No. of sheaves no. : 8
Sheave diameter inch : 60
Sheave grooved for line size inch : 1.5

B.3.2   Travelling Block
Make/type : National / Type H, 760H650
Rated capacity st : 650
No. of sheaves no. : 7
Sheave diameter inch : 60
Sheave grooved for line size inch : 1.5

B.3.3 Hook
Make/type : National / Type H-650
Rated capacity st : 650
Complete with spring assbly/hook yes/no : Yes
locking device

B.3.4 Swivel
Make/type : National / P-650 (Integrated with TDS-4S)
Rated capacity st : 650
Test/working pressure psi : 5,000
Gooseneck and washpipe min id in : 3
Left hand pin connection type : 7-5/8 Reg
Access fitting for wireline entry yes/no : Yes on top of gooseneck

B.3.5 Drilling Line
Diameter inch : 1-1/2
Construction : 6 x 19 IPS IWRC
Length (original) ft : 7,500
Drilling line reel :
- Drum cover yes/no : Yes
- Drilling line drum power drive yes/no : No
Spare drilling line yes/no : No
Location (rig, shore, etc) : Rig
Roller guides yes/no : Yes

B.3.6 Dead Line Anchor
Make/type : National / Type EB
Weight sensor yes/no : Yes
Dead line dampener yes/no : Yes

B.3.7 Block Guidance System
Make/type : BSI Track & Dolly/ non-retractable

B.4 Rotating System

B.4.1 Rotating Table
Make / type : National C-495
Maximum opening inch : 49-1/2
Rated capacity st : 800
Two speed gearbox yes/no : Yes
Emergency chain drive yes/no : No
Driven by an independent electric motor yes/no : Yes
- Electric motor type/make : Jeumont Schneider
- Maximum continuous torque ft/lbs :
- Output power hp : 1,000

Drip pan/mud collection system yes/no : Yes

B.4.2 Master Bushings
Make/type : Varco
Inserts bowls (see G.1.8) : No. 1, 2, 3, DP/DC

B.4.3 Top Drive
Make : Varco TDS-4S
Type (electric/hydraulic) : Electric
Rated capacity st : 650
Test/working pressure psi : 5,000
Output power hp : 1,100
Maximum continuous torque ft/lbs : 45,500 Low Gear / 29,500 High Gear
Two speed gear box yes/no : Yes
Maximum rotary speed rpm : 125 Low Gear / 205 High Gear
Remote operated kelly cock yes/no : Yes
Cooling system type : Close Loop System (remote blower)

B.4.3.1 Top Drive Makeup/Breakout System
Make/Type : Varco/Torque Wrench/Pipe Handler
Model : PH-85
Max makeup torque ft/lbs : 85,000
Max. breakup torque : ft/lbs : ,000
Raised backup system : yes/no : No
- Make/type :

C Power Supply Systems

C.1.1 Compressed Air Systems
Air compressors - low pressure (bulk air) :
- Quantity no. : 1
- Make : Ingersol-Rand
- Model : 650L
- Rated capacity ft3/min : 750 cfm
- Working pressure psi : 40
- Prime mover (electric/diesel) : Electric
- Continuous power hp : 154.5

Air dryers:
- Quantity no. : 1
- Make/type : R800A Pioneer Refrigerated Air Dryer
- Rated capacity ft3/min : 100 btu/min 100 SCFM to ambient

C.1.2 Air Receivers
Quantity no. : 1
Volume (total) ft3 : 2.25 m3
Pressure psi : 125
Location : Drill Floor

D Drillstring Equipment

D.1.1 Drill Pipe
Drill pipe OD inch : 5
Grade : S-135
Total jnts : 137
Range : Weight lbs/ft : 19.5
Internally plastic coated yes/no :
Tool joint OD/ID in/in : 6-5/8 - 3-1/4
Tool joint pin length (original) inch : 6-3/4
Tapered shoulder tool joints (box/pins)degree : 18
Connection type : 4-1/2 IF Bevel : 5-59/64 in
Type of hardfacing : Arnco 200XT (6000 ft)
API classification : Premium
Thread protectors yes/no : Yes
Installation tools (manual, hydraulic, none) :

Drill pipe OD inch : 5-1/2”
Grade : EU-S
Total jnts : 310
Range :
Weight lbs/ft :
Internally plastic coated yes/no :
Tool joint OD/ID in/in :
Tool joint pin length (original) nch :
Tapered shoulder tool joints (box/pins)degree :
Connection type :
Bevel :
Type of hardfacing :
API classification :
Thread protectors yes/no : Yes
Installation tools (manual, hydraulic, none) :

D.1.2   Hevi-Weight Drill Pipe
Quantity no. : 1
Nominal size OD inch : 5
Weight lbs/ft : 49.5
Range : 2
Tool joint OD / ID inch : 6-1/2 / 3
Type of hardfacing : Hughes Smooth AX@
Internally plastic coated yes/no : Yes
Connection type : 4-1/2 IF
Thread protectors yes/no : Yes
Quantity no. : 45
Nominal size OD inch : 5-1/2” Spiral
Weight lbs/ft :
Range :
Tool joint OD / ID inch :
Type of hardfacing : Hughes Smooth AX@
Internally plastic coated yes/no : Yes
Connection type :
Thread protectors yes/no : Yes

D.1.3   Drill Collars
Quantity no. : 6
OD body inch : 8-1/4
ID body inch :
Nominal length of each joint ft : 31
Drill collar body (slick/spiral) :
Spiral Recess for "zip" elevator yes/no : Yes
Recess for slips yes/no : Yes
Stress relief pin groove yes/no :

Boreback on box yes/no :
Connection type : 6-5/8
REG Quantity no. : 8
OD body inch : 8
ID body inch : 2.813
Nominal length of each joint ft : 31
Drill collar body (slick/spiral) :
Spiral Recess for "zip" elevator yes/no : Yes
Recess for slips yes/no : Yes
Stress relief pin groove yes/no : Yes
Boreback on box yes/no : Yes
Connection type : 6-5/8
REG Quantity no. : 8
OD body inch : 6.5
ID body inch : 2.813
Nominal length of each joint ft : 30
Drill collar body (slick/spiral) :
Spiral Recess for "zip" elevator yes/no : Yes
Recess for slips yes/no : Yes
Stress relief pin groove yes/no : Yes
Boreback on box yes/no : Yes
Connection type : 4 IF

Quantity no. : 12
OD body inch : 6-1/2”
ID body inch :
Nominal length of each joint ft : 31
Drill collar body (slick/spiral) :
Spiral Recess for "zip" elevator   yes/no : Yes
Recess for slips yes/no : Yes
Stress relief pin groove yes/no :
Boreback on box yes/no :
Connection type :
Quantity no. :
OD body inch :
ID body inch :
Nominal length of each joint ft :
Drill collar body (slick/spiral) :
Recess for "zip" elevator yes/no :
Recess for slips yes/no :
Stress relief pin groove yes/no :
Boreback on box yes/no :
Connection type : 6-5/8
REG Quantity no. : 8
OD body inch :
ID body inch :
Nominal length of each joint ft :
Drill collar body (slick/spiral) : Spiral
Recess for "zip" elevator yes/no :
Stress relief pin groove yes/no :
Boreback on box yes/no :
Connection type :

D.1.4   Inside BOP Valve
Quantity no. : 1
Make : TIW
OD inch : 5
Min. drill pipe ID required inch : 3-1/4
Connection type : 4-1/2 IF
Working pressure rating psi : 10,000

D.1.5 Kelly Cocks
Upper inside BOP (see also D.1.15)
- Quantity no. : 1 upper
- Make/type : Varco
Working pressure psi : 15,000
Max OD body in : 7-3/4
Max ID body in : 3
Connection type (box) : 7-5/8 Reg
Connection type (box) : 7-5/8 Reg
Lower inside BOP Manual
- Quantity no. : 1 lower
- Make/type :
Working pressure psi : 15,000
Max OD body in : 7-3/8
Max ID body in : 3
Connection type (box) : 7-5/8
Connection type (pin) : 7-5/8

D.2 Handling Tools

D.2.1 Hydraulic Makeup/Breakout Machine (e.g. EZ Torque)
Make/Type : Ezy Torque
Maximum linepull : 35,000 lb

D.2.2 Iron Roughneck
Make/type : Varco AR 3200
Size range (max OD/min OD) in/in : 3-1/2 / 9-1/2
Max makeup torque ft/lbs : 90,000
Max breakout torque ft/lbs : 100,000

E Well Control

E.1 Diverter
Fixed yes/no : No
- Make/type :
- Maximum bore in :
- ID of insert packer in :
- Working pressure psi : Annular yes/no : Yes
- Make/type : Hydril MSP
- Maximum bore in : 29-1/2
- Working pressure psi : 500
Bottom connection : Flanged
- Size in : 30
- System pressure psi : 1,500 working
- Gasket type : R-95
Number of diverter outlets no. : 2
Outlet OD (nominal) in : 12

E.1.1 Diverter Flowlines
Quantity no. : 1
Nominal size of flowlines
Running from diverter to : Overboard (aft)
Valve make/type : Ball
- Quantity no : 2
- Size in : 12
- Working pressure : 500
- Valve operator (air/hydraulic) : Hydraulic
System pressure rating psi : 500
Flex hose in flowline Yes/no : No

E.1.2 Diverter Control Panel
Primary make/type : Koomey
- Location : Under Cantilever
Remote make/type : Koomey / Type 80
- Location : Driller’s house and Toolpusher office

E.2 High Pressure Blowout Preventers
All appropriate components H2S rated yes/no : Yes

E.2.1 Kill Line Valves
Quantity no. : 2
Make/type : Cameron
Size : 3-1/16
Working pressure psi : 15,000
Gasket type : BX-154
Hydraulic/manual/non-return : 1manual & 1 hydraulic

E.2.2 Choke Line Valves
Quantity no. : 2
Make/type : Cameron
Size in : 3-1/16
Working pressure psi : 15,000
Gasket type : BX-154
Hydraulic/manual no. : 1 manual & 1 hydraulic

E.3 BOP Control System

E.3.1 Accumulator Unit
Make/model : Koomey Type 80
Location Inside hull
Fluid reservoir capacity US gal : 502
Oil/water mix rate US gpm : Hydraulic oil (Oceanic HW-540)
Glycol reservoir capacity US gal : None
Total accumulator capacity (w/o precharge) USGal : 210
System working pressure psi : 3,000
Control manifold model : Koomey
Regulator type : KR
Total useful accumulator volume equals all
preventer opening and closing volumes yes/no : Yes
- Plus percent additional volume % : 50%

E.3.2 Accumulator Hydraulic Pumps
Electric driven :
- Quantity no. : 2
- Make/model : Koomey
- Each driven by motor of power hp : 30
- Flow rate of each pump US gpm : 142
- At operating pressure psi : 3,000
- Operable off emergency generator yes/no : 1 - normal power, 1 - emergency generator
Air driven yes/no : Yes
- Quantity no. : 2
- Make/model : Koomey / U9A26
- Flow rate of each pump US gpm : 6.4
- AT operating pressure psi : 3,000

E.3.3 Primary Control Panel
Control panel make/model : Koomey
Location : Under cantilever
Panel controls for the following functions :
- All annular BOPs yes/no : Yes
- All ram BOPs yes/no : Yes
- Lock for ram BOPs yes/no : No
- Diverter System yes/no : Yes
- Kill and choke line valves yes/no : Yes
- Low accumulator pressure warning yes/no : Yes
- Low reservoir level warning yes/no : Yes
- Low rig air pressure warning yes/no : Yes
- System pressure regulator yes/no : Yes
- Pressure regulator for annular yes/no : Yes
- Flowmeter yes/no : Yes
- Quantity of pressure gauges no. : 5
- Other control functions yes/no : No

E.3.4 Remote Control Panels
Make/model : Koomey Zone I
Location : Rig floor
Location : TP office
Ability to operate main closing unit valves
directly yes/no : Yes
System routing (direct/thru panel) : Direct
Remote control of system pressure
regulator yes/no : Yes (from the Drill Floor)
Remote control of annular pressure
Regulator yes/no : Yes (from the Drill Floor)

E.4 Choke Manifold

All appropriate components H2S rated yes/no : Yes

E.4.1 Choke Manifold (For instrumentation, see H.3)
Nominal size in : 3-1/16
Minimum ID in : 3.063
Maximum working pressure psi : 15,000
Quantity of fixed chokes no. : 1
- Make/model : Demco
- Size (ID) in : 3
Quantity of adjustable chokes no. : None
- Make/model :
- Size (ID) in :
Quantity of power chokes no. : 2
- Make/model : Demco
- Size (ID) in : 2 in max
Power choke remote control panel yes/no : Yes
- Make/model : Demco
- Location : Driller’s house
- Glycol injection yes/no : No

E.5 Flexible Choke &Kill Lines (BOP to Manifold)
Quantity no. : 2
Make/type : Hose
ID in : 3
Working pressure psi : 15,000
H2S service yes/no : Yes

E.6 Flexible BOP Control Hoses
Quantity no. : 16
Make/model : Hydrasun
Size (ID) in : 1
Working pressure psi : 3,000
Fire resistant yes/no : Yes

E.7 BOP Testing Equipment

E.7.1 Hydraulic BOP Test Pump
Make/model : Koomey
Type : Air
Pressure rating psi : 30,000
Chart recorder yes/no : Yes

E.7.2 BOP Test Stump
Size in : 13-5/8, 15,000psi

E.8 BOP Handling

E.8.1 BOP Hoist System
Make/type : BEEBE Quantity of hoists no. : 2
Number of lift points on BOP no. : 2
System safe working load (max BOP wt) st : 2 x 37.5 tonnes

E.8.2 Work Platforms
BOP work platform (adjustable/fixed/none) : Fixed
Conductor pipe platform yes/no : Yes

E.8.3 Conductor Pipe Tensioning System
Make/type : Hydril
Tension capacity st : 300 kips
Number of lift points no : 4
Stroke in : 16

F Mud System / Bulk System

F.1 High Pressure Mud System
System working pressure psi : 5,000
System test pressure psi : 5,000

F.2 Mud Pumps
Quantity no. : 3
Make : National-Oilwell
Model : 12-P-160
Type (triplex/duplex) : triplex
Mud pump drive motors no. : 2
- Motor type : Jeumont Schneider DC 752
- Continuous power rating per motor : 1,600 hp
Mud pump drive motors no. : 1
- Motor type : GE DC 752
- Continuous power rating per motor : 1,600 hp
Fluid end type : Southwest
- Maximum working pressure psi : 5,000
- Test pressure psi : 5,000
Pump stroke counter type : Martin Decker
Supercharging pump type : Mission
- Driven by motor of power hp : 75
Discharge suction line ID inch : 12
M.P Pulsation dampener type : Hydril
Reset relief valve : Retsco Type B Working flowrate per pump at
90% of max gpm : 600 gpm
- Liner size inch : 6-1/2
- Pump speed (90% of max) spm : 120
- Pump pressure psi : 3,900
- Working flowrate US gpm : 514

F.2.1 Transfer Pumps / Mixing Pumps
Mixing Pumps :
- Quantity no. : 2
- Make/model : Mission Magnum 1
- Type/size : Centrifugal / 8x6R
- Output capacity US gpm : 1,200
- Drive motor type : Electric
- Power output hp : 75
Transfer Pumps :
- Quantity no. : 2
- Make/model : Mission Magnum 1
- Type/Size : Centrifugal/8 x 6R
- Output capacity US gpm : 1,200
- Drive motor type : Electric
- Power output hp : 75

F.2.2 Standpipe Manifold
Quantity of standpipes no. : 2
Standpipes ID inch : 4 (5-9/16” OD)
H-Type standpipe manifold yes/no : Yes
Kill line outlet yes/no : Yes
Fill-up line outlet yes/no : Yes
Bleed-off line outlet yes/no : Yes

F.2.3 Rotary Hoses
Quantity no. : 1
Make/type :
ID x Length inch x ft : 3-1/2 x 80
Working pressure psi : 5,000
Snubbing lines yes/no : Yes

F.2.4 Cementing Hoses
Quantity no. : 1
Type (armor sheath/flexible steel pipe) : Steel internal wound Rubber
Length ft : 80
ID Inch : 2
Working pressure psi : 10,000

F.3 Low Pressure Mud System

F.3.1 Shale Shakers
Primary :
- Quantity no. : 3 (brand NEW not commissioned even)
- Make/model : Axiom AX1
- Type :
- Nominal flow rate (total) bbl/min : Variable up to 1000gpm per shaker
dependent on screen size and fluid properties

F.3.2 Mud/Gas Separator (Poor Boy)
Make/type : Swaco
Dimensions (height x OD) ft x in : 10 ft x 4 ft
Gas discharge line ID in : 8 in
Gas discharge location, primary : Crown A-frame
Can discharge be tied into burner system : No
Vacuum break yes/no : Yes
Mud seal height ft : 24
Pressure gauge yes/no : Yes
Calculated gas throughput mmscf : 17.83

F.3.3 Degasser
Make/type : Wellco 5200
Nominal flow rate bbl/min : 600
Feed pump make/model : Mission 6 x 8
- Type/size :
- Capacity gpm : 1,200
- Drive motor hp hp : 75
Is pump dedicated to degasser yes/no : Yes
Vacuum pump make type : Wellco

F.3.4 Mud Agitators
Quantity no. : 1
Make/model : Swaco SWM-5
Driven by motor of power hp : 5
Located in tanks : Slug pit
(see F.2.1 & F.2.2 for tank designations)
Quantity no. : 4
Make/model : Swaco SWM-25
Driven by motor of power hp : 25
Located in tanks : Tanks 1, 2, 3, 4
(see F.2.1 & F.2.2 for tank designations)

F.4 Bulk System

F.5 Barite/Bentonite Silos
Quantity no. : 4
Capacity of each silo ft3 : 1307
Locations : P/tank room
Type weight loadcell : Martin Decker
Manufacturer : Totco
Pressure rating psi : 40
Relief valve(s) installed yes/no : Yes

F.5.1 Cement Silos
Quantity no. : 4
Capacity of each silo ft3 : 1307
Locations : P/tank room
Type weight loadcell : Martin Decker
Manufacturer : Totco
Pressure rating psi : 40
Relief valve(s) installed yes/no : Yes
Separate mud/cmt loading facilities yes/no : Yes
Cement discharge independent from
barite/bentonite yes/no : Yes

F.5.2 Surge Tank for Barite/Bentonite
Quantity no. : 2
Capacity of each tank ft3 : 70 ft3
Type weight loadcell : Totco
- Manufacturer : Totco
Pressure rating psi : 20
Relief valve(s) installed yes/no : Yes

F.5.3 Mud Hopper
Quantity no. : 2
Make/model : Double Life Jetting
Feed pump make/model : ASF.12
Type/size : Capacity bbl/min : 1,200
Drive motor hp hp :
Is feed pump dedicated to mud hopper(s) yes/no : No

G Casing / Cement Equipment

G.1 Cementing Equipment

G.1.1 Cementing Manifold
Discharge manifold working pressure : 15,000 psi
Cement pump discharge lines min ID : 2 in
Cement pump discharge lines
working pressure psi : 15,000
Manifold safety pressure relief valve yes/no : Yes

G.1.2 Cementing Standpipe
Quantity no. : 1
Working Pressure psi : 15,000
ID inch : 3
Connection to choke manifold yes/no : Yes
Connection to standpipe manifold yes/no : Yes

H Instrumentation/Communication

H.1 Drilling Instrumentation at Driller's Position

H.1.1 Weight Indicator
Make/type : Martin Decker / Type E-80
Sensor type : AWE 9-1

H.1.2 Standpipe Pressure Gauges
Quantity no. : 1
Make/type : Martin Decker
Max. pressure reading psi : 5,000
Quantity no. : 1
Make/type : Martin Decker
Max. pressure reading psi : 5,000

H.1.3 Choke Manifold Pressure Gauge
Quantity no. : 1
Make/type : Stewart & Stevenson
Max. pressure reading psi : 15,000
Quantity no. : 1
Make/type : Martin Decker
Max. pressure reading psi : 15,000

H.1.4 Rotary Instrumentation

H.1.4.1 Tachometer
Make/type : Martin Decker
Maximum RPM rpm : 250

H.1.4.2 Torque Indicator
Make/type : Martin Decker
Maximum torque ft/lbs : 50,000

H.1.5 Top Drive Instrumentation

H.1.5.1 Tachometer
Make/type : Martin Decker
Maximum RPM rpm : 250

H.1.5.2 Torque Indicator
Make/type : Martin Decker
Maximum torque ft/lbs : 50,000

H.1.6 Pump Stoke Counters
Quantity no. : 2
Make/type : Totco
Stoke indicator and cumulative
Stroke counter for each pump : Yes

H.1.7 Tong Torque Indicator
Make/type : Martin Decker
Maximum torque ft/lbs : 25K x tong length

H.1.8 Pit Volume Totalizer
Make/model: Electro Flow
Floats in active mud tanks : Yes
- Quantity per tank : no. : 1
Floats in reserve mud tanks : Yes
- Quantity per tank no. : 1
Floats in mud processing tank : Yes
- Quantity per tank : no. : 1
Loss/gain indicator yes/no : Yes
Audio Alarm yes/no : Yes
Visual Alarm yes/no : Yes

H.1.9 Mud Flow Indicator
Make/model : Electro Flow
High/low Alarm : Yes
- Audio Alarm yes/no : Yes
- Visual Alarm yes/no : Yes
Sensor location : Flow line

H.1.10 Trip Tank Indicator
Make/model : Electro Flow
Chart recorder yes/no : Yes

Alarm yes/no : Yes

H.2 Drilling Parameter Recorder
Quantity no. : 1
Make/type : Petron Drill Graf
Location - 1 : Driller’s house
- Type (display/recorder/both) : Display
Number of parameters recorded no. : 6
Parameter recorded : Weight
Parameter recorded : Pump pressure
Parameter recorded : Rotary torque
Parameter recorded : Rotary RPM
Parameter recorded : Pump SPM
Parameter recorded : Penetration rate

Brand new Electro wave Transocean Driller’s display system,
not commissioned yet.

H.3 Instrumentation at Choke Manifold

H.3.1 Standpipe Pressure Gauge (Drillpipe Pressure Gauge)
Quantity no. : 1
Make/type : Houston Digital Display
Pressure range (max.) psi : 6000
Visible from choke operation position : Yes

H.3.2 Choke Manifold Pressure Gauge (Casing Pressure Gauge)
Quantity no. : 1
Make/type : Houston Digital Display
Pressure range psi : 6000
Visible from choke operating position : Yes

H.4 Instrumentation at Standpipe

H.4.1 Standpipe Pressure Gauge
Quantity no. : 2
Make/type : MD Totco
Pressure range psi : 8000

Visible from drillers position : Yes
Visible from choke operation position : Yes

H.5 Rig Communication Systems

H.5.1 Rig Telephone System
No. of stations no. : 67 extensions
Make/type : Panasonic KXDT 1232
Explosion proof yes/no : Yes

H.5.2   Public Address System
Can be combined with H.6.1 above: yes/no : Yes
No. of stations no. : 67 (access from all telephones)
Make/type  : Federal Signal Dual Redundant
Explosion proof  yes/no : Yes - where applicable

H.5.3 Drill Floor Talkback System
No. of stations no. : 2
Location : Drill floor
Location : Monkey board
Make/type : Gaitronics
Explosion proof yes/no : Yes

H.6 External Communications Equipment

I Workover Tools

J Accommodation

J.1 Living Quarters

J.1.1 Accommodation Block
Total beds: no. : 43
- No. of beds per room type (1, 2, 3, etc.) no. : 2 (1 ea. 1 man)
- Number of rooms no. : 22
- Toilets (shared) no. : 0
- Showers (shared) no. : 0
Total beds: no. : 43

K Safety Equipment

K.1 General Safety Equipment

K.2 Rvival Equipment

K.2.1   Lifeboats
Make/type : Survival craft 75 C
Quantity no.  : 4
Capacity (person/craft) : 60
Locations (port, stbd) : Port and stbd
Fire protection yes/no : Yes
Radio/EPIRB (see Section H.9) : NO

K.2.2   Davits
Davits : 4 ea.
Make : Survival craft inspectorate
Type : Rig Master SWL : 8.5 T
Class : DNV
Year : 2008

Complete Jackup Drilling Package For Sale

ID 655

Worldoils Marketplace

No part of this publication may be reproduced, stored in a retrieval system or transmitted
in any form by any means, electronic, mechanical, photocopying, recording or otherwise,
without the prior permission of the publisher.

The facts of this report are believed to be correct at the time of publication but cannot be
guaranteed. Please note that the findings, conclusions and recommendations that the
publisher delivers will be based on information gathered in good faith from both primary
and secondary sources, whose accuracy we are not always in a position to guarantee.
As such the publisher accept no liability whatever for actions taken based on any
information that may subsequently prove to be incorrect.

To order this report, please send an email to mail@worldoils.com
--------------------------------------------------------------------------------------------------
Search words (for official use only) :
Italy Energy Sector, Market Overview
Italy Exploration and Production Sector
Italy FSO Industry, FSO Capacity Details by Vessel
Italy Pipeline Sector, Crude Oil Pipelines
Italy Oil and Chemicals Storage Sector
Eni S.p.A., Business Description
Profile of Royal Dutch Shell plc
Northern Petroleum Plc, SWOT Analysis
----------------------------------------------------------------------------------------------

Italy Oil Markets, 2013

ID 1747

Worldoils Marketplace

Cutter Suction Dredger - 2014 Rebuilt - for Sale

ID 759

Worldoils Marketplace

Worldrigs ID: WR2165

21.8M High Speed MPV for Sale
2000 Built Survey Vessel for sale

General
Type : High speed MPV
Built : 2000

Dimensions
Length OA : 21.8 m
Beam : 5.5 m
Draft [max] : 1.2 m

Performance
Cruise Speed : 20 knots
Max Speed : 24 knots
Main Engines : 2 x Man D 2842
Fuel Capacity : 8000 litres
Propulsion : Conventional props
Auxiliary : 2 x 25 kVa

Deck Equipment
Crane : Fazzi F40 980 kg SWL
Anchor Winch : Hydraulic

Accommodation
Full Live aboard capability
Sleeps 6 - all cabins have Air-Conditioning

Miscellaneous
Moonpool : 750mm x 750mm

Nautical Equipment
Radar : Raytheon R12-10
Echosounder : Raytheon V850
Reciever DGPS : Raytheon 398
VHF Radio : Sailor 4822
HF Radio : Sailor 4000
Chartplotter : Raytheon 620
Computer : C-Plot

Price & terms : Please enquire using the email form below

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
-----------------------------------------------------------------------
Search words (for official use only) :
21.8M High Speed MPV for Sale
2000 Built Survey Vessel for sale
Used Crew Transfer Vessel for sale
2000 Built MPV / Crew Transfer / Survey for Sale
Used High Speed Multi Purpose Vessel for sale
----------------------------------------------------------------------

21.8M High Speed MPV for Sale

ID 2165

Speedstar SS200 Drill Rig for Sale

ID 1210

Worldoils Marketplace

Worldrigs ID: WR407

Jackup Drilling Rig For Sale
F&G L-780 Mod. 0 Jackup Rig For Sale
Oil & Gas Jackup Drilling Rig For Sale

Rig Type : Jackup
Rig Design : F&G L-780 Mod. 0
Year Built : 1981
Upgrade : 2002
Class : ABS

Water Depth - Ft : 300
Drilling Depth - Ft : 20,000
Quarters : 96
Dimensions : 180' x 175' x 25'

Helideck :
72' diameter for Sikorsky S-61;
CAP-437 compliant

Variable Deckload - Operating : 4,487 kips
Variable Deckload - Transit : 3,433 kips

Number of Legs : 3
Leg Length : 406' 8"
Usable Leg Below Hull : 356'
Spud Can Diameter : 39.5'
Cantilever Reach : 40'
Transverse Movement : 10' port or starboard of centerline
Max Combined Structure Load : 1,000 kips
Bulk Mud & Cement : 6,000 cu ft
Liquid Mud : 1,713 bbls

Fuel Oil : 2,359 bbls
Drill Water : 5,572 bbls
Potable Water : 1,041 bbls
Sack Storage : 3,000 sacks
Drawworks : National 1320 UE w/1-3/8" drill line

Derrick : Pyramid 30' x 30' x 147', 1,044 million lb.
hook load capacity

Top Drive : Varco IDS-1
Pipe Handling System : Varco ST-80 Iron Roughneck
Rotary : National C-375, 37-1/2"
Top of Rotary Table to Bottom of Barge : 56 Ft.

Mud Pumps : (2) National 12-P-160
Main Engines : (5) Caterpillar D-399
Annular BOP : Hydril GK 13-5/8" 5K
Diverter : Regan KFDJ 21"
Ram BOP : (2) Cameron Type U double 13-5/8" 10K
Riser Tensioning : Conductor tensioning system, 120 kips
Solids Control : (4) Derrick Flo-Line Model 48
Cranes : (2) Seatrax series 72 Type : ABS model S7216

Mooring System : (4) 11/2" x 2,500' EIPS wire,
Baldt 10,000 lb LWT anchors

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
---------------------------------------------------------------
Search words(for official use only) :
Jackup Drilling Rig For Sale
Oil & Gas Jackup Drilling Rig For Sale
Jackup Rigs for Sale
Offshore Drilling Jackup Rigs For Sale
F&G L-780 Mod. 0 Jackup Rig For Sale
Used F&G Jackup Rig For Sale
---------------------------------------------------------------

Jackup Rig F&G L-780 Mod. 0 - 1981 built For Sale

ID 407

Worldoils Marketplace

Worldrigs ID: WR171

Nitrogen Compressor Unit for sale
Nitrogen Generator For Sale

Main components:
Screw Compressor Type SIGMA 4G
Piston Compressor Type BS302
Diesel-Type Caterpillar C-32

The unit is designed for following operating data:
21 m3/min = 740 cfm +/- 5% Nitrogen with 95% purity and a discharge pressure
of 351 bara = 5000 psi

The unit will be driven by a diesel engine. Screw and piston compressors are directly
coupled on one shaft-end of the prime mover for a synchronous output. An electric
Generator is coupled on the second shaft end of the prime mover.

The compressor unit is installed in a container and suitable for heavy duty
oil/gas-field operation.

The control system of the unit will be fully- automatic for heavy duty operation.

The cooling system consists of three closed separate circuits. The screw-oil is
cooled with a direct oil/air-heat exchanger. The compressor coolant (water with antifreeze)
and the diesel-engine coolant (water with antifreeze) are cooled with one common
coolant/air-heat exchanger each.

The ambient as well as the suction temperature will be in the range of -40°C +35°C.
The operation of the compressor unit is allowed at temperatures inside the container
above +2°C.

The unit is completely assembled on common base frame and will be tested under
full load before shipment ex works.

The unit is designed, manufactured and tested in accordance with valid and applicable
standards as DIN, VDI, VDE-ÖVE, IEC, ISO and QA-System which has been certified by
DNV corresponding to ISO 9001.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------
Search Words :
Mobile Compressor Unit for Sale
Truck mounted Nitrogen Compressor Unit
Nitrogen Generator Unit for sale
Portable Nitrogen Generator Unit
Coiled Tubing Unit
Nitrogen Pumper for sale
High Pressure N2 Compressor Unit
---------------------------------------------------------------------------------