Oil, Gas and Offshore Equipments marketplace, Oil & gas equipments

Untitled Document

Search Here

Rig/Vessel/Equipment Name:
Category:
Subcategory:
Buy/Sell/Hire/Need for hiring:
ID:

Browse equipments

No relevant equipments are found in our database.

Search again

Untitled Document

Featured equipments for sale

Worldoils Marketplace

Worldrigs ID: WR2708

Hitachi EX 1200 Excavator for Sale

Dredger for Sale

Description :

Main Particulars
Year of Construction : 1997 refit 2005
Classification : Pontoon, Deep Sea, assisted propulsion, unrestricted

Dimension
LOA : 55.15m
Length BPP : 53.08m

Beam :
15.20m with side pontoons
11.40m without side pontoons.

Draft with Excavator : 3.136m
Deck Load : 10T/m2

Equipment
Spuds : 4 stabilising spuds (1.2x1.2m)
Hydraulic Power : 2x 1200HP
Electric Power : 400KVA 400V 50HZ
Harbour Generator : 100KVA 400V 50HZ
Emergency Generator : 45 KVA 400V 50HZ
Ballast System : 120m3/hour, 7 ballast tanks
Heila Crane : 15 ton, 15m reach, type HMR150
Anchors : 2x anchor winches with 2 ton anchors
Accommodation : 6x Single Cabins

Excavator
Make : HitachiEX 1200-5
Year : 2007
Weight : 170 ton
Engine Power : 567 KW
Maximum Dredging : depth18Mtr
Bucket Size : 4m3 & 6m3
Boom : Triple Boom
Stick : Short 5.5m – Long 8.5 m

Extras

Extended undercarriage. Upgraded cylinders, safetycheck valves on all cylinders,

Extra lines for Hydraulic hammer and clamshell grab

Hitachi EX 1200 Excavator - For Sale

ID 2708

Worldoils Marketplace

Worldrigs ID: WR2204

2015 Built A-Frame for Sale
New SWL A-Frame - For Sale

30 Ton SWL A-Frame for Sale

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
---------------------------------------------------------------
Search words(for official use only) -
2015 Built A-Frame for Sale
New SWL A-Frame - For Sale
Vessel Deck A-Frame for Sale
30 Ton SWL A-Frame for Sale
New A-Frame for Sale
Vessel Deck A-Fram - 2015 Built - For Sale
--------------------------------------------------------------

Vessel Deck A-Frame for Sale

ID 2204

Worldoils Marketplace

Worldrigs ID: WR2146

3600m Cantilever Double Drilling Rig For Sale
Cantilever Double Drilling Rigs for Sale
Used Cantilever Double Drilling Rigs

Description
Drawworks : National 370
Engine : Cat 3406E 475 HP

Mast : Derrick Manufacting
Height : 97'
Max. Hook Load : 148,000 daN

Substructure : Edmonton Fabricators LTD
Max Setback : 115,000 daN
Rotary / KB beam to ground : 5.02m
Clear Working Height : 4.26m

Pumps : (2) F-800
Engine : Detroit 60 Series

Mud System : (1) Tank 77m3
Tank :
Shakers : DFTS Linear Motion
Pumps : 6x5x11 Mission Magnum
Trip Tank : 3m3
Pill Tank : 4m3
Suction Tank : 18.5m3
Settling Tank 1 : 18.5m3
Settling Tank 2 :
Shaker Tank : 24.1m3
Agitators : SOS Euro Drive

Gen Sets : (2) Stanford 300 KW Generator
Engine : Cummins NTA 855G
Panel : MCC

Well Control : Koomey Five Station 80 Gallon
Annular : 228.6mm Townsend TL90 3M
Pipe Rams : 228.6mm Townsend LWP 3M
Manifold : 3 1/8" 3M
HCR : MCm 3M
BOP :

Tubulars
Collars : 18-165mm 4.5" XH
Drill Pipe : 200- 101.6mm 4" FH X-95
HWDP : 60- 101.6mm 4" FH

Overhead
Top Drive : TSM 150 Ton Swivel
Hook / Block : High Quality 150 Ton 4X 30" Sheaves
Drilling Line : 28.6mm

Miscellaneous
Water Tank : 63m3
Fuel Tank : 28,000 Liters
Boiler : 80 HP Lister

Features
Hydraulic Skate Catwalk, BOP lifting System,Rig
Smart Crown Saver Pipe Tubs.

Rig Loads
Rig : 24
Boiler : 1
Loader TP shack and misc. : 3

Racking capability : 3600 m +

Price & terms : Please enquire using the email form below

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
-------------------------------------------------------------------------
Search words (for official use only) :
3600m Cantilever Double Drilling Rig For Sale
Used Cantilever Double Drilling Rigs
Cantilever Double Drilling Rigs for Sale
475hp Drilling Rigs for Sale
Cantilever Double Drilling Rigs - 3600M - For Sale
--------------------------------------------------------------------------

3600m Cantilever Double Drilling Rig For Sale

ID 2146

LPG Propane Tanks - 18,000 Gallon - For Sale

Worldoils Marketplace

1966 Built 18,000 LPG Propane Tank - For Sale

ID 2861

Worldoils Marketplace

Failing CF-15 Drill Rig for sale

ID 888

Worldoils Marketplace

Worldrigs ID: WR674

LCI 750 Drilling Rig for Sale
Carrier Mounted Drilling Rig for Sale
1000 HP drilling rig for sale

Introduction :
The rig is a loadcraft industries 750 drilling rig with mast hook load capacity of 365.000 lbs
(160 metric ton), powered by two caterpillar C15 diesel engines, coupled two allison 6061 RB
transmissions with torque converter. The mast is 114ft (36m) rated at 365.000 lbs API capacity.
Drawworks have 1000hp capacity. All equipment is mounted on a 7 axle carrier. The rig is
equipped with a telescoping substructure at 17ft 6 inches (5.3m) height.
The mast is equipped with a torque arrest beam for the top drive and with piping and necessary
loops to operate the top drive. The total rig is built for extremely quick rig up/down time.
The TD is a northdrill API 250 ton rated with continuous torque rating of 40.500 ft-lbs.
All necessary equipment to operate the top drive in is included with the rig.

1. Carrier
Section 1.1 carrier
- Seven axle heavy-duty carrier for load of 140.000 lbs. Fully equipped with lights and brakes
etc for normal driving operation. All axles have spring brake chambers for safety.
- Tires and wheels are disc wheels, 14"20 all terrain tread. Tire rating of 52.000 psi total.
Two spares delivered.
- Two 100 gallon (2x420 L) fuel tanks side mounted on carrier frame, connected for equalization.
- One toolbox storage box of steel with reinforced lockable doors.
- Eight side platforms with handrails on both sides along the carrier body, four on each side.
Each platform is approx. 6ft x 2 ft (1,8x0,6m)
- One staircase section from side platforms to ground level.
- Hercules 129 HA deadline anchor to be used with compression type weight sensor. Drum type
mounted on carrier frame in front of drawworks frame, hydraulic sensor included.
- Four pedestals to go under front jacks for rig stability.
- Total of six jacks for leveling the rig.

Section 1.2 hydraulic system
- 50 GPM (190 LPM) hydraulic system, design to operate at minimum 2000 psi with rating of
50 gpm at 2100 psi.
- Hydraulic pump driven from PTO on transmission.
- Air activated clutch for pump engagement.
- 325 gallon (1230 L) hydraulic oil tank with filler cap, breather, oil level, oil temp.

Section 1.3 tong circuits
- Tong hydraulic circuit is designed to operate up to 50 gpm at 2000 psi.
- Includes connectors, pressure & return lines, pressure gauge, directional flow valve and pressure
regulating valve.

Section 1.4 handling winch
- Hydraulic powered planetary winch 8000 lb (3.6 t) line pull, rated at 100 ft (30m) per minute at
2000 psi hyd. pressure.
- 325 ft (99m) of 1/2" line on drum
- Fail safe brake (in/out hydraulic activated)
- Winch sheaves provided in crown
- Protection cage on winch
- Controls at operators console

2. Main power/engine
Section 2.1 engine/transmission
-Two caterpillar C-15 540 hp diesel engines
- Equipped with limiting speed governor, air throttle sctuator, lube and fuel filters, alternator and
flywheel housing.
- High ambient radiators and suction fan, permanent type anti-freeze, signel exhaust with spark
arrester diverted to off-operator side with mufflers.
- Engine kill valve located at operators console
- Electric start (remote from operators console)
- Both engines can run at the same time or only one if adequate.

Section 2.2 transmission
- Allison S 6061 RB model six-speed transmission (five fwd 1 rw)
- With converter and oil cooler
- Air over hydraulic controls, with air line indicator system
- Controls available at operators console and in drivers cabin

3. Drawworks
Section 3.1 drawworks
- Model 4212 drum winch assembly
- Full air, fawick "28VC-1000" clutch outside drawworks frame.
- Brakes are 42" (107 cm) diameter x 12" (30,5 cm) wide, lined with 1 inch (2,5 cm) x 12" (30,5 cm)
- API driled brake blocks, full wrap dead-end equalized
- Brake rims are removable with rings for splash water cooling
- Brake operatoin shafts are mounted on ball bearings; these are self engaging and release
by operator.
- Drum barrel is 18" (45,7 cm) in diameter, and 38" (96,5 cm) long, mounted on double row
self-aligning spherical roller bearings on a 6 1/2" (16,5 cm) drum shaft
- Clutch single line pull is 42.500 lb on bare drum and first gear.

Section 3.2 lubrication
- Centralized lubrication system to all bearings and brake linkage on drawworks, is located
outside frame.

Section 3.3 brake water cooling
- Closed loop brake cooling system, mounted on carrier
- Includes 425 gallon tank with covered top, with level indicator
- Removable cap with drain system, breather and fill cap.

Section 3.4 drawworks drive
- ASA-100-3 (1 1/4") pitch, triple stand, roller chain
- Chain drive from input sprocket to sprocket on jackshaft
- ASA-100-3 (1 1/4") pitch, triple stand, roller chain as final drive to main drum

Section 3.5 main drum - grooved jacket
- Lebus counter balanced sleeve is grooved for 1 1/8" wireline, to assist spooling, and reduced line wear.

Section 3.6 hydrotarder
- Parmac 202 hydrodynamic brake assembly with dual rotary
- Fawick 28 VC 1000 air clutch, gates, inlet air valve and piping
- 325 gallon (1230 L) water tank, lines, valves and plumbing installed on rig.
- Drive from the main drum thru triple stand 1 1/4" pitch drive chain.

Section 3.7 combined gearbox
- Cushman model 279 combined gearbox consisting of right angle gearbox and dropbox.
- Right angle gearbox ratio 1:1 to drive single drum drawworks. Dropbox to transfer torque to rotary.
- Pressurized lubrication system.

Section 3.8 sandline drum
- Sandline drum with 42x8 brake size, for handling 16,500 ft of 9/16" wireline on drum
- Brakes are removable for water splash cooling of the brake rims
- Single line pull is 26,000 lbs on the drum

Section 3.9 rotary drive
- Provided at the dropbox for power connection- Elevated chain drive is oil bath type consisting of drive
sprocket at bottom of case with ASA 140-2 (1 3/4") pitch double

4. Mast
Section 4.1 mast
- 114 ft (33,5m) clear working height with an API rated static hook load of 330.000 lb with 8 lines,
and 365.000 lb with 10 lines.
- Designed to withstand 69mph winds from any direction
- Telescoping twin box structure designed and built to API standards.
- Two section with upper section telescoping into lower section for rig move operation.
- Automatic mast latching in raised or lowered position
- Lock and operating control located at base of mast
- Ladder from base to crown with safety blocks for personnel
- All necessary chains, turnbuckles, pins etc included and certified
- 4 inch standpipe rated 5000 lb, welded with 1502 unions.

Section 4.2 crown assembly
- Bender crown arrangement for 8 or 10 lines string up with conventional block.
- One 36" fastline sheave, grooved for 1 1/8"
- One 36" deadline sheave, grooved for 1 1/8"
- Four 30" sheaves cross mounted, grooved for 1 1/8"
- Two catline sheaves
- Crown sheaves are steel with flame hardened grooves.
- Sheaves are mounted on timken tapered roller bearings and all carry certification.
- Crown platform with railing for personnel safety
- Attachment point for four wind guylines from crown to ground is provided.

Section 4.3 tubing board
- All welded construction
- Automatically raised or lowered at mast telescoping
- Mounted at 55 ft above setback
- Board fingers are for 17.000 ft of 2 7/8", or 11.400 ft of 3 1/2" tubing
- 2 ft 6 inch wide tubing board walkway
- Handrails at board outside
- Attachment points for safety line (escape line) at each corner.

Section 4.4 weight indicator
- Weight indicator complete with sensor
- 12" dial indicator
- Box mount with 25ft of hose assembly
- Calibrated in NM and LBS
- Charts for 6, 8 and 10 lines on indicator

Section 4.5 crown saver
- Load and crown saver installed on drawworks
- Automatically disengages clutch and sets drawwork brakes if block comes too close to crown.

5. Substructure
Section 5.1 hydraulic telescoping substructure
- Working floor height of 17,5 ft (5,3m) with 14 ft in clear under rotary beams
- 4,5 ft is the maximum height when scoped down for transportation
- 10ft 6 in max width when scoped down
- Capacity of 365.000 lbs (160 mt) on rotary beams and 225.000 lbs (100mt) at setback
- Sub base is equipped with fold out wings, total floor area is 18ft wide x 18ft long
- Handrails with toeplate surrounding the entire floor
- One stairway from floor to carrier level
- Pipe ramp with steel plating
- Setback covered with 3" oak timbers
- Two tong backup poles in drilling configuration
- Rat and mousehole access
- BOP handling system with to rails integrated under the floor. Each rail rated at 5 ton.
- Carrier ramp is included with the sub, 10 ft wide to allow the rig to rest completely on the base of
the ramp. Comes in two sections.

Section 5.2 catwalk
- Catwalk assy of 4ft wide x 45 ft long x 3 ft high with built in stair , and bump post.

Section 5.3 hydraulic catworks - make & break-out
- Breakout cylinder has 6ft stroke with 20.000 lb maximum line pull
- Makeup cylinder has 6ft stroke with 20.000 lb maximum line pull
- Cylinder mounted in lower mast section, and includes wireline, turn back sheaves and plumbing
for hydraulics
- Both cylinders are controlled from operators console

6. Top drive
Section 6.1 TD power pack
- One 20ft oilfield skid power pack mounted in a weather and sound protective 30ft container.
- Main motor caterpillar C18 700 hp
- Main HPU at 550kW for TD main power, 2400 L reservoir, two main pumps
- Inline filters for all lines
- Engine driven and electric driven aux hpu for pipehandler functions
- Advanced PLC & HMI system to monitor and control TD system
- All controls integrated at operators console on rig floor
- Quick connectors for all cables and lines on TD system for quick rig up/down

Section 6.2 TD rig equipment
- Mast outfitted with piping for quicker rig up/down with the TD system
- Torque tube beam installed in the mast, and anchored to the mast lower section
- Turnbuckles, chain etc for the torque beam
- Loops from mast to TD (stays in the mast during rig move)

Section 6.3 TD hookup to rig
- The TD power pack connects to the rig by 4 hydraulic hoses that connect on ground level
at the base of the mast
- One 1/4" electrical cable is run up the mast and to the TD for control system
- Five 1/2" electrical cables is run to the operator console for TD operator control
- A power input of 440,160 or 480v to supply the system with electricity
- 1 kW is sufficient to run the system, 40 kW is needed to operate the electrical aux HPU

Section 6.4 TD main specifications
- Continuous torque rating of 40.500 ft-lbs
- Max rpm of 110 in first gear, and 180 in second gear
- Max breakout rating of 43.000 ft-lbs
- Pin connection 6 5/8 RH
- TD is equipped with onboard oil cooler
- Electric over hydraulic onboard valve section for all function control
- Onboard PLC and monitoring equipment

Section 6.5 TD pipehandler specifications
- 360 degrees free traveling orientation
- Backup tong capable of holding up to 80.000 Nm and range from 3 1/2" to 6 5/8" pipe
- Link tilt and retract function for drilling down to floor
- Integrated availability for remote operated elevator
- Upper remote operated IBOP and lower manually operated IBOP rated at 10.00 psi
- Telescopic leg for positioning of backup tong for make or break of saver sub
- Link arms 108 inch
- Manual elevator for 3 1/2" pipe
- Saver sub to 6 5/8 RH and to 5" RH

7. Additional equipment
Section 7.1 handling winch nr.2
- One additional winch equal to above listed handling winch specs

Section 7.2 V-door ramp and pipe racks
- One 48in x 3ft6in x 45ft catwalk from the rig floor level to the 42in high catwalks
- Four 42in x 28ft long pipe racks

Section 7.3 rotary table
- One 22" rotary table, 44" centers complete with split square solid steel master bushing,
spiral bevel gears, precision bearings throughout, removable box cover with lifting eyes,
positive pinion shaft lock and centralized lube system

Section 7.4 high pressure piping
- One 4" 5000 psi mud line and manifold for gauge and kill line, with 1502 union
- 4" 5000 psi standpipe on the lower mast section, with 1502 unions

Section 7.5 crown o'matic
- Combined crown and drawworks type crown-o-matic system for saving mast failures is
installed on the drawworks, and is set for locking the brakes down at activation

Section 7.6 safety chair (board escape)
- One T-bar type escape chair for tubingboard escape

Section 7.7 mast guylines
- Guylines are included, four of 5/8 lines from crown, two from board and two from the mast
mid section. All certified

Section 7.8 block hook
- One of ABCO 250 ton standard hook block
- Clevis kit for use with TD to shorten total assembly length included

Section 7.9 wire rope
- Drill line 1 1/8" wireline rope at 2500 ft, certificates provided
- Drill line spool is included at the front of the carrier by the cab
- 12.000 ft of sandline 9/16" included

Section 7.10 dead line anchor-indicator assy
- Anchor for 1,125" wirerope, for mast pull of 365.000 lbs for 10 lines string up on crown
- Anchor certified, and load cell included

ND 250 H2 (dual ratio)
- Continuous drill torque : 29.800 / 41.000 ft-lbs
- Max breakout torque : 43.000 ft-lbs
- Speed range : 0-200 rpm
- Dual ratio gearbox : Yes
- Gearbox ratio : 1:11.1 / 1:14.9
- Hydraulic motors : 2 x 320 kW max
- System total power rating : 700 hp
- Hydraulic system pressure : 6000 psi / 3000 psi
- Powering engine : C18

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------------------------------
Search words(for official use only) :
LCI 750 Drilling Rig for Sale
Used 1000hp Carrier Mounted Drilling rig
1000 HP Drilling Rig for Sale - LCI 750
1000hp Land Rig Builders
1000hp Land Rig Dealers
Drilling Land Rig for Sale - LCI 750 - 1000 HP
1000HP land Rig For Sale
Carrier Mounted Drilling Rig for Sale
1000 HP Land Drilling Rig For Sale - LCI 750
----------------------------------------------------------------------------------------------------

LCI 750 Drilling Rig - 1000 HP - for Sale

ID 674

Hydraulic Super Single TXD 200 Rig for Sale

Worldoils Marketplace

Worldrigs ID: WR2918

Hydraulic Super Single TXD 200 Rig for Sale
Hydraulic Super Single TXD 200 Rig - 2006 Built - For Sale

Description :

General
Type : Hydraulic Super Single TXD 200
Year of Manufacturer : 2006

A. General Characteristics
Operating Capabilities
Depth rating with 5 inch Drill Pipe : 2,500m (8,200ft)
Maximum rated static hook load : 200,000 lb (90,909 kg)
Gross Nominal Capacity (lb) : 200,000 lb (90,909 kg)
Maximum top drive load (lb) : 200,000 lb (90,909 kg)
Maximum operating wind speed (kt) : 93

Rig Power System
Main Drilling Unit Engine
Make / Model : Detroit Engine DDC/MTU
Quantity : 1
Prime Power (HP) : 760
Engine Speed (rpm) : 1800
Auxiliary air supply : Kaeser ASD 37
Maximum Pressure : 11 bar
Maximum output : 110 cfm or 3.1 m³/min
Additional equipment : 110 cfm or 3.1 m³/min
Additional equipment : Kaeser TC36 air dryer and airline lubricators
Power supply unit : 1 x Genset 550kVA, 400 volts at 50Hz. Containerised and silenced
Power Distribution : Containerized distribution unit.

Fuel Supply
Rig fuel tank : 2 x 110 gal (415 lt) fuel tanks.

Rig site Diesel fuel tank :
1 No. 30,000 litre bunded tank, transfer pump and supply
manifold. Automated Monitoring with GSM Sim card alerts to fuel
companies and management.

Automated feed system : Rig, Pumps and Rig generator feed from auto fuelling system.
Average fuel consumption : 130-210Lt per hour

Hydraulic System
Quantity hydraulic fixed pumps : 3
Quantity hydraulic variable pumps : 7
All hydraulic circuits are filtered to : 7 microns
System capacity : 798lt (210gl)

Remote Hydraulic Supply
Separate hydraulic pump and controls plumbed to outlet ports with twin quick connect
fittings are mounted to provide hydraulic oil supply for customer’s auxiliary equipment

Maximum Oil Flow : 58 gpm
Maximum Pressure : 5000 psi
Horsepower Requirement : 175 hp approx.

B. Drilling Equipment

Telescopic Mast

Hydraulic Super Single TXD 200 Rig - For Sale

ID 2918

Worldoils Marketplace

Worldrigs ID: WR1372

ASME LPG Storage Tank for Sale
Master Tank Manufactured LPG Tank for Sale
1966 Built - 15,000 Gallon LPG Storage Tanks Sale

Description
Quantity : 1
Manufacturer : Master Tank
Year : 1966
Dimensions : 114" OD x 32' OAL
Pressure : 250 psi
Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------------------------
Search words(for official use only) :
ASME LPG Storage Tank for Sale
1966 Built LPG Tanks for Sale
Used Master Tank Manufactured ASME LPG Tank for Sale
Used 15,000 Gallon LPG Storage Tank for Sale
ASME LPG Storage Tank for Sale - 1966 Built
15,000 Gallon Capacity LPG Tank for Sale
Liquefied Petroleum Gas Storage Tank for Sale
---------------------------------------------------------------------------------------------------------------------------

15,000 Gallon ASME LPG Storage Tank for sale

ID 1372

Worldoils Marketplace

Worldrigs ID: WR227

Offshore Tug/Supply Vessel for Sale
OSV For Sale

General
Built : 1983
Classification : Lloyd's: +100A, +E1 tug/supply "Offshore Rug/Supply Vessel" LMC UMS

Cargo Capacities
Dead Weight  :
1700 tons at 5.98 m, draught (=S).
1600 tons at 5.86 m, draught (=W).
Deck cargo : 500 tons
Clear deck space : 38.5 x 11 m, total: 423.5 sqm
Deck strength :
forw. frame 45 ; 5t/sqm
aft of frame 45 ; 7t/sqm
Fuel oil : 582.0 cbm
Base oil (max)  : 263.0 cbm
Drill water : 420.0 cbm
Liquid mud/brine : 470.0 cbm (3000bbls)
Potable water : 453.0 cbm
Dry bulk
2 tanks 62.3 cbm
2 tanks 65.7 cbm
Total: 256 cbm

Machinery/Propulsion
(direct diesel drive)
Main engines :
2 MWM four-cycle Diesel engines
Type: MWM TBD 510 L8, total 9,280 BHP
Propellers : 2 C.P. propellers in fixed nozzles
Bow thruster : C.P. thruster, 680 BHP, 500 Kw, Lips, electric driven
Thrust : 10 tons
Bollard pull : 108 tons
Generators :
Two shaft generators type AEG 687 KVA
Two diesel generators type AEG 330 KVA
Power supplly :
450V - 3 phase - 60 Hz
230 - AC - 60 Hz
24V - DC
To cargodeck consumers / container plugs
1 x 450V / 3 phase / 63 Amp CEE 440V
1 x 450V / 3 phase / 25 Amp CEE 440V
Speed  : Max 15.5 knots
Fuel consumption in tons/day :
10 knots at 6.2 tons
12 knots at 12.5 tons
Rudders : 2 x "flap" type, synchronically controlled
Miscellaneous :
Sewage plant, fuel oil separator, luboil separator, Halon fire
smothering equipment in engine room, fully equipped workshop

Navigation Equipment
Joystick : AEG-Geopos
Gyro Compass : Anschutz - Standard 6
Magnetic Compass : AP Navigator Dantronik
Autopilot : Anschutz 102 834N6
Radar 1 : Decca Racal - Bridgemaster
Radar 2 : Furuno FR 1221 NS
Radio Dir. Finder : Koden KS 540 K
Navtex : J.R.C, N.C.R, 300A
GPS Navigation : J.R.C, Raystar 920
Decca Navigator : AP Dantronik
Echo Sounder : Atlas Echograph 48

Communication Equipment
Radiotel, MF/HF Transmitter : Sailor T1127L
Watchreceiver (distress) : Sailor R501
Life-boat radio  : Skanti-TRP 1
VHF 1   : Sailor RT146 Duplex
VHF 2   : Sailor RT146 Duplex
Satcom C : Capsat Thrance & Thrane 3020B
Walky Talky  : 3 x ICOM IC-M12H
VHF Comm. 2000(airplanes) : Becker Flugfunk
EPIRB : Jotron-305Mk II
Internal Comm. System : A.E.G./Phonico P-2591
Mobile phone (for network communication)
STRT : Jotron-Tronsart

Accommodation
Crew : 12 single cabins; 1 x 2 + 2 x 4 person cabins
Passengers : 10.1 x 2 + 2 x 4 per cabins
Recreation room : 1 x 16.0 sqm
Messroom : 1 x 21.0 sqm
Accomodatgion fully air conditioned/heated

Refrigerated Storage Capacity
Cold Store : 8.3 cbm at -20°C
Cooled store : 8.5 cbm at +4°C

Deck Machinery
Windlass : Hydraulic driven max. pull 16 tons
Anchors/chain : 2 x 21 shackles (32 m/m chain) + 1.5 tons anchor
Deepsea Anchor  : Drum with 1500m, 36m/m wire + 1.5 tons anchor
Capstans :  2 x hydraulic driven max pull 11 tons
Tuggers   : 2 x hydraulic driven max pull 7/11.4 tons
Towing/AH winch  : Hydraulic driven
Towing drum : capacity 1650 m of 76 mm diam wire
2 x AH drum : capacity 1000 m of 62 mm diam wire max pull 250 tons
Wildcats : Max. pull 250 tons. 3"
Crane : Electric Hydraulic SWL 2 tons 8 mtr
Storage reels :
2 hydraulic driven
capacity 1200 m of 70 mm. diam
1500 m. of 62 m. diam
length 4.0 m. diam. 1.85 m
Stopperpins :
2 hydraulic driven (remote controlled)
Make:Karmoy, ......tons SWL
Guide Pins :
2 hydraulic remote controlled pins Karmoy,
2 hydraulic romote controlled

Cargo Pumps/Discharge Rates
Exact rates are depending on discharge height to the platform and piping lay out on the platform.
Dry bulk : 2 compressors: 15sqm/hr (bar)
Barite : approx. 60 tons/hr
Bentonite : approx. 60 tons/hr
Cement : approx. 60 tons/hr
Fuel oil  : 1 x 150sqm/hr. at 75 m.l.c. (8.8bar)
Drillwater : 1 x 150sqm/hr. at 75 m.l.c. (8.8bar)
Potatble water  : 1 x 150sqm/hr. at 75 m.l.c. (8.8bar)
Liquid mud : 2 x discharge/circulation pumps.
Capacity : 80sqm/hr. at 75 head (18 bar)
Brine : 1 x 80 sqm. at 75 m.l.c.
Base oil  : 1 x 80 sqm/hr. at 75 m.l.c. (9 bar)
Couplings : Weco or Avery Hardol. 4" (   bar)

This vessel specification is given in good faith and assumed to be correct.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------
Search words :
Offshore Tug For sale
Offshore Supply Vessel For Sale
OSV vessel for sale
Offshore Tug
Offshore Supply Vessel
--------------------------------------------------------------------------

Offshore Tug Supply Vessel

ID 227

Worldoils Marketplace

Worldrigs ID: WR1830

Tug Boat for Sale
Tug Boat - 1977 Built for Sale

Description :

Type : Tug Boat
Dimensions : Loa : 22,4m / B:5,4m / D:2,33m
Class : Hellenic Register Of Shipping
Build : 1977 built
Machinery :
Engines: One (1) Caterpillar 3508.
746KW / 1000bhp-1800RPM CYL. 8
Capacities : Bollard Pull : 10 Tons
Location : Greece

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------------------------------
Search words (for official use only) -
22.4m Tug Boat for Sale
Tug for Sale
Tug Boat - 22.4m for Sale
1977 built Tug Boat for Sale
1977 Built Tug for Sale in Greece
------------------------------------------------------------------------------------------------------

Tug Boat - 22.4m - For Sale

ID 1830

Worldoils Marketplace

Worldrigs ID: WR1230

National 1320 UE Drilling Rig for sale

Draw-works
National 1320 UE powered by (2) GE 752 traction motors
Type B1 Catheads
Elmagco brake SN #9352

Substructure & Mast
Mast : Inland Steel USA 28B455
Lee C Moore cantelever 1,000,000# hook load 157'
Enclosed box substructure 31.75' setback

Motor package
1 - 3406 Caterpillar (cold start)
4 - 399 Caterpillar engines
4 - Synchronos AC generators (600 volt)
2 - Quincey QSI-245 air compressors - 60 hp electric motors

SCR
Baylor Thyrig system
Top drive scr

Mud pumps
2 - National 12P-160 mud pumps - 2 each GE 752
electric motors pump #2 sn #1272

Rotating & traveling equipment
National - Oilwell C-375 rotary table
Block : National 500 ton
Swivel : Cont. Emsco L8-400
Kelly : 5 1/4" Hex Kelly 45'

Blowout prevention
Annular Hydril 13 5/8 5,000 psi
D Rams QOP 13 5/8 10,000 psi
S Ram QOP 13 5/8 10,000 psi
Koomey Type 80 20 bottle precharge system (3,000 psi)
house is on off drillers side of floor.
Remotes - driller console, ground unit remote
3"x4" choke manifold system with gauges and manual chokes.9 valves total.

Handling tools / Auxiliary equipment
Varco HP-41 hyd. unit (runs)(1)TW-60 iron roughneck (1) 400H pipe spinners
Wildcat ADS-1 automatic driller
Martin Decker type E weight indicator (1) martin decker E-Totco reader survey tool

Doghouse, water, fuel, & mud tanks
3 mud tank system (1115 bbls)
3 Derrick Flo-line mud cleaners W/(1) 2 cone desander and
(1) 16 cone desilter(1) vacu-flo 1200 degasser
2 8X6X11 100 hp centrifigal pumps for desander and desilter
2 8X6X14 100 hp centrifigal pumps for degasser 2 6X5X14 50 hp charger pumps
2 2X3X13 15 hp centrifigal pumps for trip tank
2 halco low pressure mixing hoppers (9) adjataters on mud tanks
2 water tanks (500 bbls each)(1) fuel tank-20,000 gal(1) heated top and bottom doghouse
Two story parts house
fire box storage - for flammables

Drill pipe & drill collars
Drill pipe : 603 Jts 19.60 S-135 4 1/2IF 19,000 ft
HWDP : 38Jts 49.30 spiral 4 1/2 IF 1170 ft
6 1/2" DC : 12 Jts 91.53 spiral 4 1/2XH 375 ft
8" DC : 10 Jts 150.48 spiral 6 5/8REG 310 ft

Top Drive
Rebuilt 500 ton National top drive PS-149-H

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

National 1320 UE Drilling Rig for Sale

ID 1230

Worldoils Marketplace

Worldrigs ID: WR2162

40,000TLC Floating Dock for sale
282M Floating Dock for sale
Floating Dock - 1973 Built - For Sale

General
Year built : 1973
Type of floating dock : Self-docking type - 10 pontoons welded to side walls
Lifting capacity : 40,000 tons
Class and survey position : Not classed

Specifications
Length overall : 282.20m
Length of pontoon : 250.20m

Breadth extreme : 59.00m
Breadth outside walls : 57.00m
Breadth between walls : 49.00m at crane deck
Breadth between fenders : 47.00m

Height of dock walls : 23.00m
Height of pontoon at centre line : 6.20m with 0.20 camber
Height of keelblocks : 1.45m
Draft above keelblocks : 7.30m

Number/capacity of main pumps(s) :
5 x 3,500m3 x 15m (one pump for two pontoons)

Lifting time : Approx. 4 hours

Number/capacity of tank test pump(s) : 1 x 700m3
Number/capacity emergency fire pump(s) : 1 x 320m3 x 42m
Number/capacity of fresh water pump(s) : 1 x 100m3 x 40m
Number/capacity of generator(s) : 1 x 36kw x 440Vac x 60Hz
Number/capacity of mooring capstan(s) : 4 x 10t x 17m/min
Number/capacity of air winch(es) : 2 x 2t x 32m/min
Number/capacity of dockarm(s) : 2 x 2t x 18m
Number/capacity of crane(s) : 2 x 10t x 30m
Numbr of watertight tanks : 30 ballast tanks
Lightweight of floating dock : 21,000 metric tons

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------
Search words (for official use only) -
40,000TLC Floating Dock for sale
282M Floating Dock for sale
Self-docking Type Floating Dock for Sale
1973 Built Floating Dock for Sale
Floating Dock - 40,000TLC - For Sale
----------------------------------------------------------------

40,000TLC Floating Dock for sale

ID 2162

Worldoils Marketplace

New CS7 Submarine for Sale

ID 2140

Chutes for guiding of rope from vessel to sea for Rent

Worldoils Marketplace

Chutes for guiding of wire from vessel to Sea - For Rent

ID 2969

Ingersoll-Rand TH60 Long Tower Drilling Rig - 1985 Built

Worldoils Marketplace

Ingersoll-Rand TH60 Long Tower Drilling Rig - For Sale

ID 1226

Cabot 550 Portable Drilling Unit for sale

Worldoils Marketplace

Worldrigs ID: WR2163

Cabot 550 Portable Drilling Unit for sale
600HP Portable Drilling Unit for sale

Description
Drawworks
Rebuilt Cabot 550 drawworks with new Mckinney PD 150 water brake
and new brake pads. (2) new Kinecor hydraulic catheads. (2) new braden
PD12 hydraulic winches. Powered by new John Deere 600hp diesel motor
6135H485, Allison transmission CLBT5860DB.

Mast
Franks Cabot 98' 4-leg telescoping double mast, 250,000#SHL, hydraulically
raised and scoped with 5 sheave crown block and 2500' of new 1/1/8" drill line.
New sala block mounted on derrick.

Trailer
All above mounted on a 3 axle trailer

Substructure
3 piece sub with mud boat and ramp. RKB = 12.5'

Air Compressor
New Quincy D350-10 simplex reciprocating air compressor with 10hp
460/3/60 TEFC magnetic starter NEMA 4 enclosure and 200 gal air tank.
Mounted on mud boat.

Rotary Table
Rebuilt Oilwell SA 17 1/23"

Blocks
New Mckinney Artic T160 block hook

Kelly
4 1/4" x 38' long square drive kelly with drive bushings and kelly schuck.

Kelly Drive Bushings
17 1/2" split master bushings

Mud Pumps
#1 Ideco MM700 duplex pump, belt driven by a Cat D379 diesel engine, #2
Ideco MM700 duplex pump belt driven by a Cat D379 diesel engine.

Mud System
(1) 275bbl single tank system with a new 4 panel brandt king cobra shale shaker,
(2) 7.5hp agitators, (1) desander with 2-12" cones, (1) Caustic mixing barrell,
(1) eye wash station, (3) 400 watt lights, (1) mud hopper, (2) 5 x 6 centrifugle
pumps with 2-50hp electric motors.

Generator Skid w/Lubester, Junk Box & Wireline
Generator, junk box with vdoor, wireline unit and lubester all on one skid. Skid is
40'3" long x 14'11" wide. Wireline unit is a new five star 15,000, Generator is a
Cat 320kw powered by a Cat 3408 PC motor with Eaton 45 kva transformer.

Water Tank & Top Doghouse
New 450bbl water tank with top doghouse hinged to support beams to lower into
water tank. New water tank is 35' long x 8'5" wide and has 2-3x2 centrifical
25hp pumps, new doghouse is 7' x 14' plus a porch on each end.

Fuel Tank : New 2000 gallon tank with electric fuel pump
Drill Pipe : 192 joints (6048') of 4 1/2" XH yellow band drill pipe
Drill Collars : 12 drill collars 6" - 6 1/4" with 4 1/2" XH connections
Subs : 6 lift nipples 4 1/2" XH pins
Pipe Baskets : 3 pipe baskets on skids
Catwalk : (1) 41" wide x 52' long and 46" high catwalk with pipe groove

Misc
1 new 55' 5000psi 4" kelly hose
2 new 15'4" x 5000psi vibrator hoses
1 new 12'4" x 5000psi vibrator hose
New 2" hoses with 2" high pressure manifold
1-6 mud jet

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------
Search words (for official use only) -
Cabot 550 Portable Drilling Unit for sale
Portable Drilling Unit for Sale
600HP Portable Drilling Unit for sale
Portable Drilling Unit - Cabot 550 - For Sale
----------------------------------------------------------------

Cabot 550 Portable Drilling Unit for sale

ID 2163

Worldoils Marketplace

Worldrigs ID: WR149

1500hp SCR Land Rig - Used and refurbished
National 110 UE Refurbished 1500HP SCR Rig
Refurbished 1500 HPSCR Land rig for sale

Specifications
NationalL 110 UE 1500HP Single Drum Drawworks p/b
(2) 1000 HP Apollo 752 DC Traction

Motors w/10HP Emerson Blower Assembly.

Mast :

SKYTOP 142’ Cantilever 1,000,000# Hook, Skytop Crown

Block w/ (6) Crown Sheave Cluster.

SUB : Skytop 28’W x 26’H x 72’L Swing‐Up, 1,000,000#
Casing Load, 600,000# Setback.

Gen Sets :
(3) Kato 1050 KW AC Generator p/b CAT D399 Mounted on
10’W x 30’8”L Covered Skid.

SCR :

IDM 4‐Bay w/ (2) Eubank V72‐10733 Air Conditioners

w/9’2”L Porch, Mounted on 10’3”W x 29’2”L Skid.

Mud Pumps :
(2) LS NOI 1300 HP (10P130 Style) Triplex p/b (2)

Apollo 752 DC Traction Motors.

Mud System :
543 Bbl Suction Tank w/ 543‐Bbl Shaker Tank and 543 Bbl
Mixing Tank all w/ (2) ODRILL/MCM Linear Motion Shale Shakers,

two 10” Cone Double Life Desander, eight 2” Desliters and

DRECO “Deep Pit” Degasser.

Rotary Table :
Mud King RT275 27‐1/2” w/Split Master Bushings, p/b Apollo 752

Traction Motor w/Emerson 10 HP Blower Assembly.

Swivel :
Mud King 450‐Ton

Block/Hook :
Ideco 525‐Ton Block/Hook Combination.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------
Search words (for official use only) :
1500HP Electric Drilling Rig For Sale
Land Drilling Rig For Sale - 1500hp
1500hp SCR Land Drilling Rig For Sale
Used 1500 HP SCR Drilling Rig
------------------------------------------------------------------------------

Land Rig - National 110UE - Refurbished - 1500HP SCR for sale

ID 149

SULLAIR 900 cfm / 350 psi Air Compressor & Air Booster Combination Unit for Sale

Worldoils Marketplace

Worldrigs ID: WR533

Sullair 900 cfm / 350 psi Air Compressor
350 psi Air Compressor & JGP/2 900 PSI 2-3/4in x 3-1/4in Air Booster

Model : 900 cfm / 350 psi Air Compressor JGP/2 900 PSI 2-3/4in x 3-1/4in Air Booster
Manufacturer : Sullair
Condition : Used

Description :

(1) SULLAIR 900 cfm / 350 psi Air Compressor
& (1) ARIEL JGP/2 with 900 PSI 2-3/4in x 3-1/4in
Air Booster - Complete Combination unit - Late 1990's models
1st Stage is 900 cfm / 600 psi & 2nd Stage is 900 cfm / 900 psi
DETROIT MTU 12V-2000 DDC Diesel Engine
Electric Starter
Radiator
Control Panel
Heat Exchanger
Skidded

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------------------------------------
Search words -
Sullair Air Compressor and Air Booster Combination Unit for sale
Used Sullair 900 cfm / 350 psi Air Compressor For sale
Air Compressor and Air Booster Combination Unit For sale
900 cfm / 350 psi Air Compressor For sale in USA
ARIEL JGP/2 with 900 PSI 2-3/4in x 3-1/4in Air Booster Combination Unit
---------------------------------------------------------------------------------------------------------------------

Sullair 900 cfm / 350 psi Air Compressor & Air Booster Combination Unit for Sale

ID 533

Worldoils Marketplace

Worldrigs ID: WR1327

LPG Propane Storage Tank for Sale
Used Flint Steel LPG Storage Tank for Sale
1955 Built - 30,000 Gallon LPG Propane Storage Vessel for Sale

Description
Quantity : 1
Manufacturer : Flint Steel
Year : 1955
Dimensions : 108" OD x 70' OAL
Pressure : 250 psi
Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------------
Search words (for official use only) :
LPG Propane Storage Tank for sale
1955 Built Flint Steel LPG Storage Tank for Sale
Used 30,000 Gallon LPG Propane Storage Vessel for Sale
LPG Storage Tank for Sale
Flint Steel LPG Propane Storage Vessel for Sale - 1955 Built
30,000 Gallon Capacity LPG Propane Storage Tank for Sale
Used Flint Steel LPG Storage Tank for Sale
-------------------------------------------------------------------------------------------------------

Used LPG Propane Storage Tank - 1955 Built 30,000 Gallon - for Sale

ID 1327

Worldoils Marketplace

Worldrigs ID: WR2235

Crew Boat for Sale
2006 Built Crew Boat for Sale in USA

Description :

Type : Crew Boat
Dimensions : L: 52 / B: 9 / D: 3.84m
Class : ABS
Build : 2006
Accom / Pax : 80 Pax
Machinery : 6700 BHP
Speed : 26 knots
Deck : 260 m2 Deck Space

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------------------------
Search words (for official use only) :
Crew Boat for Sale
2006 Built Crew Boat for Sale in USA
80 Passenger Accomodation Crew Boat
Crew Vessel 2006 Built for Sale
Crew Boat - 52m for Sale
------------------------------------------------------------------------------------------------

Crew Boat - 52m - for Sale

ID 2235

Worldoils Marketplace

Worldrigs ID: WR1821

Tug Boat for Sale
Tug Boat - 1976 Built for Sale

Description :

Type : Tug Boat
Dimensions : 23.9m x 7.82m x 3.73m
Class : ABS
Build : 1976
Machinery : 2 x Caterpillar D379 1400HP at 1225RPM
Speed : 12 knots
Deck :
Tow Hook : 1 x Swinging Arm with Remote Tripping
Towing Winch : 1 x Hydraulic Brattvaag - SLM41 (25t)
A-Frame : 1
Capacities :
Fuel Oil (m³): 134.45
Potable Water (m³) : 20.46
Ballast Water (m³) : 27.37

Location : Persian Gulf

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us anemail to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------
Search Words (for official use only) :
1976 Built Tug Boat for Sale
23.9m Tug Boat for Sale
Tug Boat - 23.9m for Sale
Tug for Sale in Persian Gulf
1976 Built Tug for Sale
-------------------------------------------------------------------------------------------------

Tug Boat for Sale

ID 1821

Ingersoll-Rand T3W Drill Rig - 1988 built - For Sale

Worldoils Marketplace

Worldrigs ID: WR509

Ingersoll-Rand T3W Drill Rig for Sale In USA
1988 Built Used Drilling Rig for Sale

Model : T3W Drill Rig
Manufacturer : Ingersoll-Rand
Year : 1988
Condition : Used

Description :

1988 Ingersoll-Rand T3W Drill Rig - S/N: 2902
IR 825 CFM / 350 PSI Air Compressor
Cummins 855 Diesel Deck Engine
26,500 lbs of pull back
300' ft of used drill pipe (20' x 3-1/2" x 2-3/8"IF) & basic tooling included
Rod Rack
Carousel
Hammer Lubricator
Water Injection Pump
Mounted on a Ford L9000 Truck
Cummins L10 Diesel Engine
8 Speed Transmission
55,000+ miles
Custom Black Paint Job (around 2014)

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------
Search words (for official use only) -
Ingersoll-Rand T3W Drilling Rig for Sale
1988 Built Used Drilling Rig for sale in USA
Used Drilling Rig for sale in USA
1988 Built Land Drilling Rig For Sale
Drilling Rig Ingersoll-Rand T3W for Sale
Oilfield Drilling Rig Ingersoll-Rand T3W
----------------------------------------------------------------------------------------

Ingersoll-Rand T3W Drill Rig - 1988 built - For Sale

ID 509

Worldoils Marketplace

Worldrigs ID: WR1353

Cutter Suction Dredger for Sale
61'8" Length Dredger for Sale

Description :

Overall length (with ladder) : 61'8"
Overall width : 10' 8"
Hull depth : 3' 8"
Height (trucking) : 9'6"
Mean draft (with fuel) : 28"
Fuel capacity : 600gal
Dry weight : 60,000lb +

Operating Conditions
Digging depth :
Minimum : 2'
Maximum : 25'

Swing width:
Minimum depth : 70'
Maximum depth : 50'

Dredge Pump-
Pekor 8X8-25 MX-UW 3 15/16 Heavy Duty
Underwater Dredge Pump

Suction diameter : 8"
Discharge diameter : 8"
Impeller diameter : 25"
Prime Mover Engine Diesel
Deutz BF6M1013CP
Water Cooled
255HP @2300RPM

Cutter Drive
31.5" outside diameter blade basket cutter with replaceable
cast serrated edges.

Cutter force :1400 LBS
Cutter force per linear inch : 74 LBS
Cutter speed : 0-40 RPM

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------
Search words(for official use only) :
Cutter Suction Dredger for Sale
Dredger for Sale
61'8" Length Cutter Suction Dredger
25 Feet Maximum Digging Depth Dredger for Sale
---------------------------------------------------------------------------------

Cutter Suction Dredger for Sale

ID 1353

Worldoils Marketplace

Worldrigs ID: WR2134

New Superyacht Submarine for Sale
3 persons Super Yacht Submarine for Sale

General Characteristics
Occupants : 1 pilot and 2 passengers
Maximum Operating Depth :
100 meters / 330 feet
200 meters / 650 feet
300 meters / 1,000 feet
Possibility to upgrade depthrating after acquisition

Operational Autonomy : Up to 6 hours
Type : Dry, 1 atmosphere

Classification : DNV-GL

Dimension and Weight
Freeboard : 80 cm with freeboard extender
Dimensions (standard) :
315 x 241 x 172 cm
Fits in standard shipping container without sidefenders

Dimensions (LX) : 315 x 249 x 179 cm
Weight (standard) : 3,750 kg
Weight (LX) : 4,150 kg
Maximum Allowable Payload : 350 kg (Salt water)

Pressure Hull
Pressure Hull Material : Acrylic + Steel
Hatch Type : Top-Hatch

Propulsion
Propulsion Type : Electrical, Brushless DC
Propulsion Horizontal : 2 x 5.5 kW Thrusters
Propulsion Vectored Vertical : 2 x 6.4 kW Thrusters
Surface Speed : 2.8 knots
Underwater Speed : 2.8 knots

Life Support Systems
Oxygen System : Continuous Flow
Mission Oxygen Capacity : 3 Liter (Quick Exchange)
Emergency Oxygen Capacity : 2 x 20 Liter @ 200 bar
Carbon Dioxide Removal : 8 hours with Calcium Hydroxide
Survival Period : 96 hours
Emergency CO2 Removal : Lithium Hydroxide Blankets
Autonomous Breathing Devices : 3
Life Support Monitoring : 2 independent life support monitors (O2 - CO2)

Price & terms : Please enquire using the email form below

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------------
Search words (for official use only) :
New Superyacht Submarine for Sale
300 Meters Diving Depth Superyacht Submarine for Sale
3 persons New Super Yacht Submarine for Sale
New Super Yacht Submarine with 300 meter diving depth
DNV-GL Classification Superyacht Submarine for Sale
-----------------------------------------------------------------------------------------------

New Superyacht Submarine for Sale

ID 2134

Drilling Rig - Atlas Copco RD20 Range III - For Sale

Worldoils Marketplace

Worldrigs ID: WR393

Atlas Copco RD20 Range III Drilling Rig for Sale
Drilling Rig - Atlas Copco RD20 Range III - For Sale

Model : RD20 Range III Drill Rig
Manufacturer : Atlas Copco
Year : 2006
Condition : Used

Description :

2006 Atlas Copco RD20 Range III Drill Rig - S/N-21013
IR 1250 cfm / 350 psi Air Compressor with In & Out box
Cummins QSK-19 Diesel Deck Engine (7187 Hours since rebuilt around 2022)
120,000 lbs of Pullback
Bean Triplex Mist Pump
17-1/2" Table Opening
Mounted on a CCC (Crane Carrier Company) 5-Axle Carrier - VIN#:1CYDGV5806T047236
CAT C13 Diesel Engine
FULLER 8-Speed Transmission
(5) Hydraulic Leveling Jacks
425/65R22.5 Front & 11R-22.5 Rear Tires
Base Beams Main Hydraulic pump rebuilt in 2022

Note : Upgraded Atmospheric Downhole Pump Valve & HUSCO Valve Hydraulic

Actuated Controls

Atlas Copco RD20 Range III Drilling Rig - For Sale

ID 393

Worldoils Marketplace

Worldrigs ID: WR681

Subsea Manifold System For Sale
Subsea Oilfield Equipment for Sale
Subsea Kit For Sale

History :
This field was put onstream in 1994 and ceased production in 1999.
Located 21km from Frigg Complex. The field was de-commissioned
in 1999 and the 3 wells plugged and abandoned.

The 10,000psi wellhead was not ”On the Shelf” and specialised
development was required.

Design Parameters :

Based on 670 bars and 125 deg C with flowrates at 2.3MSM3/d. Compliance
based on Norwegian statutary authorities NPD etc meeting with the most
stringent requirements in the world. Water depth 120 metre. 3 off
production subsea wells tie back to TCP2 platform

Status :
Currently stored in Tananger Norway. Has been maintained
throughout delivery installation and return onshore.

Major Components :
Manifold System
• Manifold Cap – 13 5/8” – 10 M – Hydraulic high pressure (10.000 psi) cap,
to seal 8-1/4” nominal 13   5/8” – 10 M hub with metal to metal seal. Hub to
top for connection to running tool, with hydraulic  couplers.

• Subsea Pig Launcher Connector – For connection of pig launcher to manifold,
13 5/8” – 5M connector, with tapered bore.

• 13 5/8” – 10M Full Bore Manifold Hub Assembly – 13 5/8” – 10M hub for manifold
interfaces with 13    5/8” – 10M connectors with 13 5/8” – 10M flanged bottoms.

• Loose valves – 2 1/16” and 4 1/16” – 10M manual ROV operated gate valves.

• The Base Connector 13 5/8” – 10M Connector with 8 ¼” through bore.

Wellhead System :
• 18 ¾” Wellhead Assembly – 15 M SB system wellhead housing with 20”
casing extension, inlays in seal areas.

• 30” Suspension Joint – Suspension Joint for interface with retrievable
IDGB/ PGB and support wellhead.

• 13 3/8” Casing Hanger – With buttress – thread, inlay on packoff seal area.

• 10 ¾” Casing Hanger – With new VAM thread, inlay on packoff seal area.

• Packoff seal assembly – Locks and seals casing hanger to wellhead housing,
with aluminium bronze seal element.

• Drilling Guide Base – Retrievable guide base with removable 10 ft posts,
Vetco post tops.

• Dummy Wellhead |- 18 ¾” wellhead outer profile, with simulated 10 ¾” inner profile,
supported in a 30” housing on a base plate.

• Temporary Wellhead Protective Structure – Lands and supported on 30” housing.
Internally acts as corrosion cap for welhead and housing, externally provides
protection against impact damage and over-trawlability.

Tubing Hanger System :
• Tubing hanger – 4” x 2” – 11M tubing hanger, with 5” pup joint, 4 SCSSV penetrations
and one seal  test port with check valves, metal to metal sealing with inlayed seal areas.
• Tubing Hanger Running Tool and BOP/ Orientation Adaptor – 4” x 2” – 10M running tool
for SB  system tubing hanger running and setting.
• Tubing Hanger Emergency Recovery Tool – Mechanical tool run inside the drilling riser
on drill pipe.   Will land and lock inside tubing hanger allowing recovery.
• Tubing Hanger Orientation/ Elevation Check Tool – Tool which can be run inside the
drilling riser to check the orientation and elevation of the tubing hanger in relation to the
orientation pin. Utilises lead impression blocks.
• Tubing Hanger Washout Tool – Tool which is run on drill piupe with four arm guide wire
frame, to washout tubing hanger seal pockets after removal of BOP prior to installation
of Xmas tree.

Xmas Tree System :
• Production Guide Base – Similiar to/ connected Drilling Guide Base with flowline and
service line hubs mounted to provide connection flexibility to the Xmas tree. Interfaces with
30” housing and flowline/ service line flexibles.

• Xmas Tree – 4” x 2” – 10M valve block, with integral actuated and manual 10M valves.
18 ¾” tree connector with flowline and service line connector, 13 5/8” – 10M hub mandrel
top, tree protection frame.

• Xmas Tree cap Assembly – 13 5/8” – 10M hydraulic tree cap for 4” x 2” bores.

• Xmas Tree Test Stand – Fabricated base with short dummy PGB posts and mating test
hubs for 18 ¾” connector and flowline and service line connectors.

• Xmas Tree Maintenance Stand – Independant extension feet which can be mounted over
dummy PGB posts, or used individually to raise the height of the tree and support its weight.

• Universal Shipping Skid – Fabricated base to which either test stand sticks, or individual
equipment frames can be mounted and restrained for shipping.

Workover System
• Lower Riser Package – 4” x 2” – 10M Valve block with 4” and 2” isolation valves and coiled
tube cutting BOP ram. 13 5/8” – 10M connector bottoms with 13 5/8” hub mandrel top. High
angle release.

• Emergency Disconnect Package – 13 5/8” – 10M connector with riser weak link and stress
joint connector. Incorporating wireline plug profiles.

• Riser System – Consisting of 5” x 2 ½” – 10M riser, stress joint, standard joint, pup joints,
tension joint and landing joint. Upper and lower riser adaptors.

• Surface Tree – 5” x 2 9/16” – 10M surface tree block with 4” and 2” actuated wing valves,
supported in tensin frame, with tree cap, suitable for wireline BOP.

EAST-FRIGG

History :
The field was put onstream in 1988 in a water depth of 100 metre. In 1997 the field was
shutdown and in 1999 the production wells were decommissioned, plugged and
abandoned. The field was located 18km from the Frigg complex.

A technological pioneer project developed for diverless installation and operation. The
first subsea field on the Norwegian shelf with remote controlled wells in several clusters.
The East-Frigg development was based on modular principles as the first of its kind.

Design Parameters :
EF installations were designed for a minimum flow-rate of 1.25MSM3/d and a maximum
flow-rate of 6.5MSM3/d. The maximum working pressure rating was 345bar. Bottom hole
flowing temperature approx 62 deg C, Wellhead hole flowing temperature approx 35-40
deg C, Wellhead static temperature 4-6 deg C. Design was based on 5 subsea production
wells located over 2 production templates PSA & PSB. For reduncy reasons and to
minimize intervention it was decided at this time to include 2 off Xmas trees in series
for each well. 1 off Vetco and 1 off ”Well Jumper Module tree Cameron.

There were 3 wells on PSA and 2 wells on PSB , the two production stations produced to a
central manifold station (CMS) located halfway between the 2 production stations which
were approx 3km from each other. Production flowed via the CMS to Frigg where it was
metered and treated.

Status :
Currently stored in Tananger Norway. Has been maintained throughout delivery installation
and return onshore.

Major assemblies comprises :
5 off Vetco Xmas tree and tree cap assemblies, each gas production tree comprising 18 ¾”
SG-5 wellhead connector, integral with 5” x 2” , 5,000psi working pressure valve block, with
fail safe closed valves, equipped with visual position indicators and overrides. Manifold spool
flanged to block, production spool, Xmas tree guide frame, control system components and piping.
Complete tubing hanger system including hydraulic running tools, adaptors, VAM-Hydril x over
riser couplings, emergency recovery tools, orientation/ inspection tools. Control systems for THRT.
Intervention amd maintenance systems incl; flowhead, 5,000 riser system, EDP/ LRP, hydraulic
control system, adaptors, test stumps, remote killing equipment, guide bases, hubs, sealing
caps, dummy Xmas tree etc

6 off Kongsberg/ Cameron WJM (Xmas trees)
Xmas trees made of forged steel block of low alloy steel, all sealing areas are inconel inlaid
(ring grooves, seal sub pockets, valve seat pockets)

Module M35 Description :
The module was delivered, installed and commenced production in 1993. Design life was
30 years. Production ceased as with Lille-Frigg in 1999. The purpose of the module was to
faciltate handling of process for both Lille-Frigg and the Oil producing satellite platform Frøy.
(Note Frøy platform has been returned onshore and been disposed of)
Dimensions of the module are 40.5m length x 24m width x 24.8m height. Weight for single lift
is 3216 ton. The module is located on the TCP2 platform located within Frigg process handling
complex.

The module is equipped with a pedestal crane with working radius at 36 tons between 9-30
metres and 12 tons with maximum radius of 60 metres. This crane carried out material handling
for all of the TCP2 platform, which meant that TOTAL could at the time dispose of the rest of the
smaller cranes which were out of date.

The module is in pristine condition ”As New” with all systems and equipment under full
preservation. and maintenance.

The module contains systems and equipment for treatment of oil & gas comprising the following
main functions;
Gas System
Oil System
DEG recovery
Fuel Gas Compression
Water Injection System
Electrochlorination System
Fine Filter System
Dearation System
Water Injection Pumps
Fiscal Metering Systems
Produced Water System
Heating Medium System
Chemical Injection System
Electrical and Control Systems
Firewater and Deluge systems
Fire & Gas monitoring and protection.
Lighting, normal and emergency.

Also included in the module are, intrument control room, low voltage rooms, high voltage room, drains,
stairs, platforms, escapes routes, vent/ flare systems, piping to ANSI standards manifolds and
distribution. All cabling routes etc are intact.

Module M52 description :
The module which is located on the support frame of TCP2 contains equipment for treatment of
condensate and gas and comrises the following main functions;
Pig traps
Condensate heaters
Separators
Pumps
Gas metering
Gas Lift compressor
Module dimensions; 31.3m long x 11.3m width x 8.2m height. Weight 573 ton.
The module has a design life of 30 years with a start of production 1993 ceased production 1999.

Module (pancake) P48 description :
The module which is located inside the support frame of the TCP2 contains equipment for stabilisation
of condensate and oil & gas comprising the following main functions;
Separator
DEG and condensate pumps
Condensate metering
Fuel gas compressor
Module dimensions; 16.2m long x 12.2m width x 5.2m height
The module has a design life of 30 years with a start of production 1993 ceased production 1999.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------
Search words :
Subsea Manifold System For Sale
Subsea Equipment For Sale
Subsea Wellhead System for sale
Subsea Xmas Tree System For sale
Complete Subsea Kit For Sale
Subsea Kit For Sale
Subsea Field for Sale
Subsea Oilfield Equipment for Sale
----------------------------------------------------------------------------------

Subsea Manifold System For Sale

ID 681

Worldoils Marketplace

Worldrigs ID: WR1102

SAEZ TLS 75 Tower Crane for Sale
2010 built Tower Crane for Sale
Used Tower Crane for Sale

Description
68,4 M hook height
65 M boom
16 TON max capacity
Cabin deluxe with display

Hoist motor 60 Kw (80 cv)
Inverter
SR/DR
Foundation is by anchor
Mint condition

Year of manufacture : 2010

Immediate delivery

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------------------------------
Search words (for official use only) :
SAEZ TLS 75 Tower Crane for Sale
2010 built Tower Crane for Sale in Europe
Used Tower Crane - 2010 built - for Sale in Europe
Tower Crane - SAEZ TLS 75 - for Sale
Used SAEZ TLS 75 Tower Crane for Sale in Europe
Tower Crane - 16 ton Max Capacity - For Sale
Used SAEZ TLS 75 Tower Crane for Sale
---------------------------------------------------------------------------------------------------

SAEZ TLS 75 Tower Crane for Sale - 2010 built

ID 1102

SK 775 Carrier Mounted Drilling Rig for Sale

Worldoils Marketplace

Worldrigs ID: WR2507

SK 775 Carrier Mounted Drilling Rig for Sale
750 HP Carrier Mounted Drilling Rig

Description:

Carrier Drilling Unit :

2010 Service King-SK 775 Series
Serial Number 1S972DD8XAL976150

Single drum with Lebus grooved drum for 11/8"drilling line with 42" X 12"
band brakes with circulating drum and kobalt 48"X 8" double disc assist

Powered by 2 Detroit Diesel 60 Series engines 540 HP each with 2-45000 FS
Allison transmissions with Cotta 1500 HP splitter box and Service King
1500 HP right angle box

Mast :

Service King 112',400,000SHL 4 leg telescoping mast Hydraulically raised
and scoped 5 sheave crown block,hydraulic cat works, automatic racking
board, air and hydraulic control consoles, safety lights.

Carrier :

All of the above mounted on a 2010 Service King 775,6 axle back in carrier
with single man cab,air shift,4 hydraulic leveling jacks with locks,Can
Global 250 ton quick release deadline anchor, mechanical rotary drive
(shaft drive),2 hydraulic 10,000 Ib. utility hoist,side walkways,steps
and safety rails. The six front tires are 425/65R22.5 wide base tires
mounted on 12"X 22.5 steel hub piloted bud type wheels.The 12 rear tires
are 11R22.5 all-terrain tires mounted on 8.25 X 22.5 hub pilotedbud type
steel wheels.

Substructure :

Service King 8'-22' high hydraulically raised with 14'X16'floor with 2'X16'
wing with 6'X30'base beam. 12'high with 400,000Ib.set back with safety energy
efficient LED lights, with 27½" National rotary table 12'H X 45'L X 12'W - 1
piece back on ramp

Dog House :

10'W X 40'L with benches, 12 Lockers,tool and bolt room,knowledge box,satellite
auto driller,Martin Decker 3 pin geolograph recorder 2-220 Volt electrical
heaters, insulated, safety florescent lights,windows,covered porch with stairs
and landing safety rails. Hydraulically raised/lowered unit.Oilfield skidded.

Water Tank :

9'H X 10'W X 42"L (500 barrel) with 8'X10'storage room with water pump,220
volt electric heater, has 4 hydraulic cylinders with control valve to raise
and lower the dog house above it,safety florescent lights

Catwalk/Pipe Tubes :

42'X 3'X 8'cat walk with Vee Door ramp stairs 1 sets 36"X 30' triangle pipe
racks Brewster 6 sx swivel with 40' Hex Kelly with roller bushings 200 ton
block and hook

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
SK 775 Drilling Rig for Sale
750 HP Carrier Mounted Drilling Rig for Sale in USA
2010 Built Service King 775 Carrier Mounted Drilling Rig
Service King 775 Carrier Mounted Drilling Rig - 750 HP for Sale

Carrier Mounted Drilling Rig for Sale in USA

---------------------------------------------------------------------------------------------------------------

Service King 775 Carrier Mounted Drilling Rig For Sale

ID 2507

Worldoils Marketplace

Worldrigs ID: WR72

PSV for Time Charter
UT755LN PSV for time charter

General
DPII FiFi1 UT755LN PSV
Class Notation : DNV 1A1 Fire Fighter I+SF E0 DYNPOS-AUTR CLEAN BIS TMON
Year of build : 2009

Main Particulars
Design : UT755LN
LOA : 73.6 m
Length BP : 68.3 m
Breadth Moulded : 16.0 m
Depth Moulded : 7.0 m
Max Loaded Draft : 5.87 m
Deadweight : 3250 T
Deck Area : 708 sqm

Performance
Trial Speed / Max : 13 knots (16T/24hrs)
Cruising Speed : 11 knots (12.5T/24hrs)
Economical Speed : 10 knots (10.5T/24hrs)

Capacities
Dry Bulk : 11250 cuft
Potable/Fresh Water : 840 m3
Drill/Ballast Water : 850 m3
Brine/Mud : 970 m3
Base oil : 200 m3
Fuel Oil : 950 m3

Deck Equipment
Capstans : 2 x 8 T
Tugger Winch : 2 x 10 T
Deck Crane : 1 x 3 MT @ 16 m

Discharge
Dry Bulk : 1 x 805 cuft/min
Fresh Water : 1 x 200 m3/hr at 9 bar
Drill/Ballast Water : 1 x 200 m3/hr at 9 bar
Brine/Mud : 2 x 75 m3/hr at 9 bar
Base Oil : 1 x 150 m3/hr at 9 bar
Fuel Oil : 1 x 200 m3/hr at 9 bar

Propulsion and Machinery
Main Engines : 2 x 2725 BHP/2005 KW
Total Main Engines : 5450 BHP / 4010 KW
Maine Engine Type : 2 x Ulstein Bergen
Propellers : 2 x CPP

Thrusters
Bow 1 : 1 x 600 KW/815 BHP
Bow 2 : 1 x 600 KW/815 BHP

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------
Search words(for official use only) -
New PSV for Time Charter
PSV for Charter
UT755LN for charter
PSV available for Time Charter
New UT755LN PSV for Time Charter
-----------------------------------------------------------------------------

PSV UT755LN for Charter

ID 72

Worldoils Marketplace

Worldrigs ID: WR247

Utility Tug For Sale
4400 bhp Utility Tug For Sale

Description
4,400BHP Utility Tug
Built : 2010 NK class

LOA : 37m
Draft : 4m
M/E : 2 x 2200BHP Cummins

Bollard pull : about 50T
Fuel Oil capacity : 320 m3
Fresh Water capacity : 80m3
Accommodation for 14 men

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------
Search words(for official use only) :
Utility Tug - 4400 bhp For Sale
4400 bhp Utility Tug 2010 Built For Sale
50T Bollard Pull Tug For Sale
New Utility Tug For Sale
2010 Built Utility Tug
New Built Tug For sale
-----------------------------------------------------------

Utility Tug - 4400bhp - For Sale

ID 247

Worldoils Marketplace

Worldrigs ID: WR538

Chemical Tanker for Charter
Chemical Tanker - 7000DWT - For Charter
Chemical Tanker - 7000dwt - 2011 built
2011 built Chemical Tanker for Charter

General
Classification Notation :
BV I + Hull + Mach Chemical Tanker ESP
Unrestricted navigation
Built - 2011

Principal Dimension and Capacity
Length overall : 104.90 m
Length (BP) : 98.50 m
Breadth moulded : 19.05 m
Depth moulded : 9.90 m
Design draft : 6.50 m
Scantling draft : 6.70 m
Speed : 12 knots
Complement : 25 men

Main Machinery
Main Engine : 1 x 3997bhp Daihatsu 6DKM-36
Generator : 3 x 350 kW
Emergency Generator : 1 x 75 kW
Boiler : 1 x 4000 kg/h oil fire steam

Deck Machinery
Windlass : 2 x electro hydraulic
Mooring winch : 2 x electro hydraulic

Cargo System
Cargo pump :
10 x 200 cbm/h electric deepwell pumps
2 x 100 cbm/h electric deepwell pumps

Number of cargo : 10 cargo tanks
Slop tanks : 2 slop tanks
Tank coating type : Marine line coating
Grade of cargo : 10

Life Saving
Lifeboat : 2 x 25 persons
Life raft : 2 x 25 persons

Navigation and Communication Equipment
Radar : 2
GPS Navigator : 2
Gyro compass : 1
EPRIB : 1
SSB : 1
Inmarsat : 1

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
-----------------------------------------------------------------------------------
Search words (for official use only) -
Chemical Tanker for Charter
Chemical Tanker - 2011 built - 7000DWT
7000DWT Chemical Tanker for Charter
7000 dwt Chemical Tanker
Chemical Tankers for Sale - 2011 built
2011 built Chemical Tanker - 7000DWT - For Charter
Over 104m in length - Chemical Tanker
----------------------------------------------------------------------------------------------------------------

Chemical Tanker for Charter - 7000 DWT - 2011 built

ID 538

Worldoils Marketplace

LPG Propane Tanks - 9,200 Gallon - For Sale

ID 2851

Worldoils Marketplace

Worldrigs ID: WR1218

Hopper GXXTA D/D Back-In Well Service Rig
Used Hopper Drilling Rig for Sale

Model : GXXTA D/D Back-In Well Service Rig
Manufacturer : Hopper
Condition : Used

Description:

Hopper GXXTA D/D Back-In Well Service Rig - S/N: 191
DETROIT Series 60 Diesel Engine
ALLISON 5860 Transmission
15” Double Hydro Brake
PEMCO 96’ ft H 180,000 lbs Mast
Hydraulic Raised & Scoped
Rod & Tubing Boards
Mounted on a CCC (Crane Carrier Company) 5-Axle Truck
Leveling Jacks
385/65R22.5 Front & 11R24.5 Rear Tires
Disc Wheels

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------------------------------
Search words(for official use only) -
Hopper Drilling Rig for Sale
Used Drilling Rig Hopper- For Sale
GXXTA D/D Back-In Well Service Rig
Hopper GXXTA D/D Back-In Well Service Rig
Used Hopper Drill Rig for Sale
--------------------------------------------------------------------------------------------------------

Hopper GXXTA D/D Back-In Well Service Rig for Sale

ID 1218

Worldoils Marketplace

Worldrigs ID: WR1053

Double Expanding Gate Valve for Sale
Vastas Valve for Sale - 24"
24” Vastas Valve for sale - class 600#
Class 600# Vastas Valve

Specifications

Manufacturer : VASTAS Valve Manufacturing
Class : 600#

Type :
Double Expanding Gate Valve,
Double block and bleed
Fire safe design
TCC metal to metal seats with emergency lubricant seal.

Design standard : API 6D
Bonnet : ASTM A216 Gr. WCB
Body : ASTM A216 Gr. WCB
Double Expanding Gate Face : Tungsten Carbide HVOF
Double Expanding Gate Assembly : AISI 410

Stroke : 722mm
Working Pressure : -29 to 38 Celsius, 102 bar, Max 425 Celsius, 56 bar
Test Pressure : Shell 153 bar, Closure 112 bar, Air 6 bar

Part Number : 110
Date : 06-2010

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------
Search words (for official use only) :
Double Expanding Gate Valve for Sale
Fire Safe Design Vastas Valve for sale - 24"
Class 600# Vastas Valve
24” Vastas Valve for sale
Double Block and Bleed Vastas Valve
24" Vastas Valve for Sale - class 600#
----------------------------------------------------------------------------------------

Vastas Valve - 24 inch - for Sale

ID 1053

Worldoils Marketplace

Worldrigs ID: WR1741

Unused CAT C32 Marine Diesels
2 New Marine Diesel Engine for Sale

Description

Rated 850 HP @1800 RPM
1400hp@ 2300 RPM
Keel cooled
ABS, IMO Certs, Tier 2
S.N RNY 00559 ARR # 32477
24 Volt electric starters
Dry type air cleaners
Expansion tank, safety shutdowns
Electronic Governor
Flywheel size SAE O
Engine gauges

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
----------------------------------------------------------------------------------
Search words :
New Marine Diesel Engine for Sale
Marine Engines for Sale
2 Unused Marine Diesel Engine for Sale
CAT C32 Marine Diesels for Sale
New CAT C32 Marine Diesels for Sale
--------------------------------------------------------------------------------------

2 New & Unused CAT C32 Marine Diesels for Sale

ID 1741

Worldoils Marketplace

Worldrigs ID: WR2647

Dredge Pipeline Float for Sale
New Dredge Pipeline Float for Sale

Description :

High Impact polyethylene floats in 2 halves with joining system.
Marine grade Raw material used for construction of Floats and
Eco-friendly foam filling available.

Features :
- Light weight, easy installation,secure nut
bolts system and tightening belts
- Quick online maintenance without taking off line
- Marine grade Galvanised accessories.
- Thick PE Shell with eco-friendly PU filling
for maximum impact resistance.
- Superb flexible system forn rough sea conditions.
- Excellent Weathering & UV Resistance.
- Colour options available

Application :

Dredge Pipe Lines

Marine Hoses
Cable Hoses
Aquaculture breeding area cages
Swimming Pool markers
Ocean Filth blockers

Type A : Advanced Design - Two Halves

Pipe Size	ID	OD	Length	Approx Byoyancy(kgs)
125-160	160	300	600	21
180-225	225	450	900	84
225-250	250	670	1000	225
280	280	670	1000	215
315	315	670	1000	207
355	355	670	1000	195
650	685	1550	2000	2450
750	785	1650	2000	2675

Type B : Standard Design - Two Halves

Pipe Size	ID	OD	Length	Approx Byoyancy(kgs)
250	250	750	750	225
280	280	750	750	220
300-315	325	850	1100	425
350-355	365	850	1100	400
400-410	415	850	1100	375
400-420	425	1100	1175	785
450	455	1100	1175	765
500	505	1100	1175	750
550-560	565	1100	1175	735
600-635	645	1300	1300	1025
600-650	675	1550	1300	1600
700-710	720	1450	2050	2050
700-710	750	1550	1300	1525
800	820	1650	2000	2825
900	920	1550	1300	2715

Closed Cell Polyurethane filling is an optional feature
and floats are available as empty shells as per customer
requirements. Cell Foam used is "Green environment friendly".

PN : Indicates Pressure Rating(e.g.PN 16 suitable for 16kg/cm²)
SDR : Standard Dimension Ratio (pipe OD to its thickness)
Accessories : Nuts,bolts & tensioning straps are provided with the
floats as standard parts. Tensioning Machine available seperately.

Please note : All dimensions mentioned are in millimeters(mm)unless
otherwise specified.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------
Search words (for official use only) :
Polyethylene Pipeline Float for Sale
600 Length Dredge Pipeline Float for Sale
Dredge Pipeline Float - 120mm - for Sale
Dredging Pipeline Float for Sale
-----------------------------------------------------------------------------

Dredge Pipeline Float for Sale

ID 2647

Worldoils Marketplace

Worldrigs ID: WR1446

MAC Mechanical Drilling Rig for Sale
450 hp Drilling Rig for Sale in USA

Description

Drawworks :
Mac 400 with hydromatic (water) brake, catheads, powered by a Caterpillar 3408 rated
at 450 HP with air clutch and torque converter

Mast :
P-J Services, 98’ free standing derrick, 280,000#, angle iron steel beams, scopes
with king pin and two axle dolly. Racking capacity of 8500’ of 4 ½” drill pipe

Substructure :
One piece, I beam box type. 8’H x 15’W x 34’L with 4’ fold down wings, enclosed parts house
and large volume tank with Quincy 350 air compressor driven by electric motor in substructure.

Rotary Table :
Brewster 17 ½”, rotary bushing-square, 4 ½” square Kelly

Block/Hook :
Three sheaves (6 lines) grooved for 1 1/8” line

Swivel :
TSM 150 ton with new wash pipe and packing

Generator :
125 KW powered by Detroit 6-71 in steel house with all switchgear and transformer.
Steel house includes parts cabinets, work area, and storage

Mud Pump :
Gardner Denver FXN 7 ½” x 14’ duplex powered by a Cat 3408 (450 HP) with air clutch

Mud System :
Single cone desander, Mission Magnum mud mixing pump, mud stirring guns
(rig uses earthen pits)

BOP :
Regan 10” annular (new annular rubber)

Top Dog House :
Scopes down into 400 barrel water tank, heater lockers, knowledge box

Drill String :
200 joints 4 ½” x-hole, 16.60 ppf drill pipe, yellow band, 12 assorted subs,
lower Kelly valve, inside BOP

Ancillary Equipment :
Kelly hose (new), vibrator hoses (3), 2500’ of 1 1/8” drill line (new), mouse hole, mouse
hole driller, weight indicator, tong torque gage, bear automatic driller, one pen drill recorder,
Sure Shot deviation instrument, mud gages, (3) sets pipe racks, Type C rotary tongs, rig lights
(derrick, sub, mud pump, gen house), drill collar slips, (2) sets drill pipe slips, Quincy 325
air compressor with electric motor, slick line wire line unit mounted on single axle trailer.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------
Search words (for official use only)
Mechanical Drilling Rig for Sale in USA
MAC 400 Drilling Rig for Sale in USA
8500 Drilling Capacity Land Rig in USA
Mechanical Drill Rig 400hp for Sale
MAC - 8500 Drilling Capacity Oil Rig for Sale
450hp Land Drilling Rig for Sale
----------------------------------------------------------------------------------------------

MAC 400 - Mechanical Drilling Rig 450 hp for Sale

ID 1446

Atlas Copco T4BH Drilling Rig - 2009 Built for Sale

Worldoils Marketplace

Atlas Copco T4BH Drilling Rig - For Sale

ID 382

Worldoils Marketplace

Worldrigs ID: WR276

300pax Accommodation Barge for Charter
Accommodation Barge for Charter for sale

General Particulars:
Registry : Port Klang
Year Built : 2009
Loa : 100.00m (328 ft)
Breadth : 30.50m (100 ft)
Depth : 7.62m (24 ft)
Draught : 5.50m (16.5 ft)
GRT : Approx. 7,380
NRT : Approx. 2,210
DWT : Approx. 7,500 ton
Deck Strength : 15 ton/m2

Accommodation :
Single Suite Room : 4 x 1-man
Single Berth : 8 x 1-man
Double Berth : 6 x 2-men
Four Berth : 69 x 4-men

Total 300-men

Full air-conditioned & comply to ILO92, IMO Res.A468 (xii)

Tank Capacities :
Fuel Oil : 1,773 cbm
Portable Water : 2,443 cbm
Drill Water : 1,254 cbm
Sea Water Ballast : 6,507 cbm
Anti Rolling : 2,808 cbm
Dirty Oil/Bilge : 13 cbm
Sewage : 54 cbm

Discharge & Tranfer Rates :
Fuel oil : 45 cbm/hr @ 45m/head
Fresh water : 120 cbm/hr @ 35m/head
Drill water : 120 cbm/hr @ 50m/head
Ballast water : 500 cbm/hr @ 40m/head
Fire & GS : 130 cbm/hr @ 120m/head

Deck Machinery :
Mooring Winches :
8 x 70 t Single Drum Electro-hydraulic Winch,
1,500m x 46mm IWRC @ 7m/min - 50m/min 150 ton holding capacity.
Mooring Anchors : 8 x 7 tons Flipper Delta
Tugger Winches : 4 x 10 tons @ 15m/min 200m x 22mm winches
Main Crane : Amclyde Mariner 35000 75T fully hydraulic marine pedestal crane
Aux. deck carne : 3 ton @ 10m

Engine Room :
Generator : 5 x Diesel CAT 3412TA 590kW, 440V / 60Hz / 3Ph
Emergency Generator : 1 x Diesel CAT C4.4 99 kW,
440V / 3 Ph /60Hz
Air Compressor : 2 x 175 cfm @ 10 bar
Fresh Water Maker : 2 x 60 tons/day
FW Domestic system : 3 sets
SW Domestic system : 2 sets
Fuel oil tranfer pump : 2 units
Fire pump : 2 units
Emergency fire pump : 1 unit
Bildge pump : 2 units
Oily water separtor : 1 set
Ballast pump : 2 x 500 m3/hr
Sewage plant : 2 sets

Workshop Equipment :
Lathe machine : 1 unit
Jig saw machine : 1 unit
Grinder machine : 1 unit
Bench Drilling mach : 1 unit
Radius Drilling mach : 1 unit
Milling machine : 1 unit
Welding rectifier : 3 x 400 Amp. 2 x 600 Amp

Life Saving Equipment :
# Comply to SOLAS 1974, 1983 Appliances Amendment
Life Raft : 24 x 25-men
Life Jackets : 600 pcs
Life Buoys : 12 pcs
Line throwing appl. : 1 with 4 projectiles & line
Stretcher : 2 units
Work vest : 12 pcs
Rescue Boat : 1 x 6-men with davit

Fire Fighting Equipment :
# Comply to Classification and SOLAS requirement
Fire Water Monitor : 2 x 100 m3/hr
Foam Monitor : 2 units at Helideck
Fire Hose Station : Provided
Fire Extinguishers : CO2 Dry chemical
Gas Monitoring : Provided
Fire Alarm System : Provided
CO2 Protection System : Provided for machinery room, winch rooms, paints stores and spaces
Firemen outfit : 3 sets

Radio & Navigation :
Radar : 1 x Furuno FR-1505 MK3
Echo Sounder : 1 x Furuno FCV - Equipment 1100L
GPS : 1 x Furuno GP - 150
Navtex : 1 x Furuno NX - 700
VHF : 2 x Furuno FM - 8800S
SSB Radio : 1 x Furuno FS - 2570
Radar Transponder : 1 x McMurdo S4, 9GHz VHF and MF watch reciever
1 x Furuno DMC - 5
EPIRB : 1 x McMurdo E5, 406 MHz
Mini M Satcom : 1 x Nera Mini-M
Helicopter : 1 x VHF AM Transciever
Communication : 1 x Radio Beacon
2 x Aviation Radio
Intercom System : 1 x VINGTOR ACM-AlphaCom
Public Address System : VINGTOR ETB/SPA Talkback PA System
CCTV : 1 x indoor System
1 x Outdoor System

Helideck : Capable for Sikorsky S92

Other Facilities :
Hospital : 1 x 2-Bed
Medic Rm : 1 on main deck
Offices : 4 on main deck, 1 on B-deck
Site Manger Office : 1 on main deck
Conference Room : 1
Radio/Control Room : 1 on roof top
Mess room : 1 up to 164 persons
Galley : 1
Freezer/Chiller Room : 60 m3
Dry Provision Store : 60 m3
Genearl Store Room : 1
Laundry/Drying Room : 3
Auditorium : 1 on B-Deck
Gymnasium : 1 with Gym machines
Prayer Room : 1 on C-deck
Electrical Workshop : 1

The above data believed to be accurate, but no guarantee.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------
Search words :
Accommodation Barge for Charter
Accomodation Barge - 300pax for sale
Work Barge for Charter
300pax accommodation barge for charter
Accommodation barge for sale
---------------------------------------------------------------------------------------------

Accommodation Barge for Charter - 300pax

ID 276

Worldoils Marketplace

Worldrigs ID: WR136

Tug Boat For Sale

Description:

Type of Ship : Harbour and towing Tug Boat with FiFi
Built Year : 18 Oct,2008
Class : ZC

Navigation/service area : Coastal/A1
GRT/NRT : 493t/147Mt

Dimensions
Loa : 38.80 m
Lpp : 35.00 m
Breadth (M) : 10.20 m
Depth(M) : 4.80 m
Draft(light/loaded) : 2.65/3.43 m
Light/loaded displacement : 714.90/1019.40 Mtons
Material(hull/deck) : Steel/steel

Engine
M/E(type/output/rpm/set) : G8300zc6B,1500kwx500rpm,2sets, Made in Wuxi,China

Aux.(type/output/rpm/set) :
495AZD/35.30KW/1500RPM,/1sets, Made in China
6135Zcaf/1330KW/1500RPM/2sets, Made in China

Generator(type/output/rpm/set) :
STC-30/30KW/1500RPM/1sets, Made in China
T2H2XV-120-2/120kw/1500rpm/2sets, Made in China

Bow thrust : Fitted

Oil : Light oil

Navaids :
1 STR6000,1 FT1500,1 H3E/H3E/J2B/F1B,1 SAR-9,
1 SEP-406,2 STV160,1 GPS,/2 MAGNETIC COMPASS, 1 SOUNDER ECHO

FiFi : Main fire pump 3BA6/60m³/h/0.50Mpa, Fire extinguisher 11sets,others 6uints

Propulsion : 1 Gear 1.757:1,2 stern shaft Dia.240mm,2 Dia.2000mm fixed Cu propeller

Annual survey : 27 Sept.,2009

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Tug Boat - 2 x 2040hp - For Sale
2008 Built Tug for Sale
Tug Boat 2008 Built For Sale
Tug For Sale
--------------------------------------------------------------------------------------------------------

Tug Boat - 2 x 2040hp - For Sale

ID 136

Worldoils Marketplace

Worldrigs ID: WR242

3T Knuckle Boom Crane for Sale
Small Knuckle Boom Crane

Description :

Crane type : RC 40-EH-10,8/6,2-15M-3T/9m-5T-RC

Safe working load : 3 T

Max working radius : 15m

Max working radius : 2,1m

Safe working load : 5 T

Max working radius : 9m

Max working radius : 2,1m

Pump capacity : 105 1/min

Hoisting speed : 30m/min

Slew sector : 360^o

Slew speed : 1 rpm

List + Trim : 5^o + 2^o

Electric Motor Data

Electric motor type

Voltage : 690V/60Hz

Heating element : 1x40W

Power/Duty : 37,2 kW/S6-40%

Motor speed : 1750rpm

Rotation (seen from fan end) : Right

Motor start method : D.O.L

Nominal current : In=40A

Start current : Is=202,8A

Weight and Outline Dimensions :

Total weight : ~ 10200 kg

Outline dimensions of crane

General arrangement drawing G-9611

Assembly drawing S-9312

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------
Search words(for official use only) :
Knuckle Boom Crane for Sale
Ofshore Knuckle Boom Crane
Small Knuckle Boom Crane
3T Knuckle Boom Crane for Sale
Small Offshore Knuckle Boom Crane
-----------------------------------------------------------------------------------------

3T Knuckle Boom Crane for Sale

ID 242

Worldoils Marketplace

Worldrigs ID: WR1868

Offshore Support Vessel for sale
Offshore Support Vessel - 2008 Built for Sale

Description :

Type : Offshore Support Vessel
Dimensions : Loa : 55m / B:13,8m / D:5,5m
Class : ABS
Build : 2008built
Accom / Pax : 24 men accomodation
Machinery : Main Engines : 2 x Nigaata 6MG25HX (3600HP)
Deck : Clear deck area : 29m x 11.4m = 330.6m2
Capacities : Fuel Oil : 340M3 Fresh Water : 550M3
Location : South East Asia

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------------------
Search words (for official use only) -
2008 Built Offshore Support Vessel for sale
Offshore Support Vessel - 55m for Sale
55m Offshore Support Vessel for sale
Offshore Support Vessel for sale in Asia
24 Men Accomodation Offshore Support Vessel
---------------------------------------------------------------------------------------------------

Offshore Support Vessel - 2008 Built for Sale

ID 1868

Worldoils Marketplace

Worldrigs ID: WR1091

Offshore Lattice Boom Crane for sale
New Offshore Crane for Sale
Offshore Lattice Boom Crane- 80 ton

General Specification
Slewing Angle : 360º(Continus)
Slewing Speed(Full Load) : 0~0.6rpm
Luffing Time(Full Load) : 150s Up/down
Luffing Angle : +15° ~ +82°
Parking Angle : -10° ~ +15°
Operator Cabin : Left Side

Main Winch Data
Lifting Capacity(SWL) : 80T@13m,6T@45m,See Loading Chart;
No. Of Fall : 4
Working Radius : 9.2m(Min) / 45m(Max)
Main Lifting Speed(0-80T) : 0~6m/min
Main Lifting Speed(0-40T) : 0~18m/min
Hook Travel : 60m

Aux Winch Data
Lifting Capacity(SWL) : 5T@47m, Man Riding :1.5T
No. Of Fall : 1
Working Radius : 10.2m(Min) / 47m(Max)
Main Lifting Speed(Full Loading) : 0~90m/min
Lifting Height : 62m

Note :
All operational speeds stated above are based on average volumetric efficiencies
provided by our suppliers of hydraulic components. A speed variation tolerance
of +10% to -5% is within the accepted range and should be taken into consideration.

Hydraulic Arrangement
Hydraulic Systems
The hydraulic transmission will be designed for optimum performance within the
constraint of available horsepower. High pressure hydraulic system uses power more
efficiently and applies power as needed.

All motions controls offer infinitely variable speed and full reversing characteristics.
Two full flow filters will be installed. The filter(s) will be adequately sized for full flow
operation without causing pump cavitation. Replaceable wire mesh filter cartridge of
minimum absolute value of 40 micron will be used. The pumps will have overflow suction
independent of the reservoir, and the arrangement of piping can avoid air pockets.

Hoisting Circuit
Each winch is driven by a common open loop hydraulic system including piston pump,
piston motor and epicycles gearbox. Each winch is fitted with oil immersed, multi-disc
and dynamically rated “fail safe” brake.

The fixed displacement hoist motors offer a constant operating speed.

Slewing Circuit
The slew circuit is driven by a common open loop hydraulic system. Dynamic braking
of slewing is by means of hydrostatic compensation. Similarly positive locking brakes
are fitted in the circuit and used as static brake.

Luffing Circuit
Luff circuit is driven by a common open loop hydraulic system. Each winch is fitted with oil
immersed, multi-disc,dynamically rated “fail safe” brake. an additional luff ratchet cylinder is
included, providing a positive means of locking the luff drum whenever the prime mover is
shutdown.

Hydraulic Piping
1. Pipes: No pipe threads will be used for the high-pressure lines larger than 3/8". Hydraulic
components that have pipe threaded ports lines will have a minimum working pressure 300PS. .
2. Pipe fittings: Zinc plated mild steel material. External fittings are painted and protected by
Denso tape or equivalent against corrosion.
3. Hoses: High rubber quality for best resistance against sunlight and salinity, Wire breaded
for applicable specified hydraulic pressure ratings
4. Hose couplings: Zinc plated mild steel material, External couplings are painted and
protected by Denso tape or equivalent against corrosion.

Hydraulic Oil Tank
1. Level gauge with isolating valve (to top cover)
2. Inspection and cleaning cover
3. Filter with fine mesh stainless steel strainer and ventilation
4. A relief valve will be installed in the discharge line of pump.

Cooling Circuit
The air-oil heat exchanger will be provided and sized to ensure continuous operation of
the crane under the ambient temperatures given on the data sheets.

Electric Arrangement
Standards, Codes and Protection
Refer to Codes Of Practice and Standards. The electrical systems onboard the crane
complies with these standards for good offshore electrical design and engineering practices.

Standard Lighting
The following are provided as standard lighting packages for the crane. More lights can be
added according to client's request.

Description : Aviation Warning Light
Quantity : 1
Size : 85W
Location : Boom Tip
Power Supply : UPS

Description : Aviation Warning Light
Quantity : 1
Size : 85W
Location : Mast
Power Supply : UPS

Description : Florescent Access Light
(with 90 min back-up battery)
Quantity : 2
Size : 2 x 36 W
Location : Access Way Outside Cabin
Power Supply : Main

Description : Florescent Access Light
Quantity : 2
Size : 2 x 36 W
Location : Machinery House
Power Supply : Main

Description : Florescent Access Light
(with 90 min back-up battery)
Quantity : 1
Size : 2 x 18 W
Location : Cabin
Power Supply : Main

Description : High Pressure Sodium Floodlight
Quantity : *
Size : 400 W
Location : Boom
Power Supply : Main

Power Supply
Main Power Supply : 415 VAC , 03 Phase , 50Hz
Uninterrupted Power Supply : 230 VAC , 01 Phase , 50Hz

Others
Junction box(es) is provided at the pedestal interface for connection to client supply.
By default only SS316 junction boxes are installed onboard.

Generally cable wires will be multi-stranded copper and protected against mechanical
damage. All power and control cables are with XLPE/EVA/GSWB/EVA construction.
Occasionally able of XLPE/EVA/CWB/EVA is used when big power cable is part of the
design. All electrical lines are tagged accordingly for ease of maintenance.

All outdoor equipments and instruments are Ingress Protected IP56. Indoor equipments
and instruments are rated with IP44 as minimum.

Ordinarily, the power supply for crane is transmitted from pedestal to slewing platform
through the centre slip ring to ensure the crane can work at any angle.

Controls and Instruments
Cabin :
The following instruments are arranged on the console to permit the operator to maintain an
uninterrupted view of the loads and instrumentation. The two(2) motion controls joysticks
designed according to API-2C, are ergonomically correct and easy to handle. All instruments
are clearly labeled.

1. Motion Control Joysticks:
2. “Dead-Man” Type
- Position sensitive with motion and speed infinitely variable and proportional to movement
    from spring-return central position.
- Luff and slew (single left) joystick
- Main and auxiliary hoist (single right) joystick
- Prime Mover Start/Stop Switch
- Prime Mover Emergency Shutdown Switch
- Slew Brake Control Lever for option
- Safe Load Indicator System
- Visual and Audible Annunciator Panel
- Boom Hoist Down Override Switch
- Pressure Gauges: Boast Control / Hoist / Slew / Luff
- Electrical Switches:
- Lighting
- Windshield Wipers & Washer
- Warning Horn
- Air Conditioning
- Main and Auxiliary Hoist selector
- Tachometer

Hoist Mechanisms
Hoist Winch Data
Feature : Hoist Drum
Description : Material
Details : Cast Steel
Remark : 100% NDT

Description : Groove
Remark : Reeving not over 3 layers

Description : Support End
Details : Anti-friction Bearing

Feature : Braking
Description : Type
Details : 1 x Band Brake
Remark : Asbestos free lining, for man riding winch only.

Details : 1 x Multi-disc Brake
Remark : Positive Locking

Details : 1x Load valve
Remark : As dynamic Brake

Description : Safety Factor
Details : Minimum 2.0

Feature : Rope Anchors
Description : Type
Details : Bolted rope clamp
Remark : For ease of rope replacement

Description : Safety Factor
Details : Minimum 1.1
Remark : Ensures rope breaking strength when over loaded

Feature : Ratios
Description : Drum to Rope
Details : Min.19 : 1
Remark : Drum pitch diameter over rope diameter

Feature : Safety
Description : Drum flange beyond top layer
Details : 2.5 x rope diameter
Remark : To avoid rope jumping out of drum unintentionally

Description : Fleet angle
Details : < 2.5⁰
Remark : Ensures smooth and even rope spooling at all times

Description : Dead turns on the drum
Details : Min.5
Remark : Amount of rope that is not in used even at the
maximum hoist reach of the crane

Luffing System

Anti-backward limit is used to prevent the boom over luffing in order to protect boom.

Feature : Hoist Drum
Description : Material
Details : Cast Steel
Remark : 100% NDT

Description : Groove
Remark : Reeving not over 3 layers

Description : Support End
Details : Anti-friction Bearing

Feature : Braking
Description : Type
Details : 1x Load valve
Remark : As dynamic Brake

Details : 1 x Multi-disc Brake
Remark : Positive Locking

Details : ratchet and pawl
Remark : Luffing locking device

Description : Safety Factor
Details : Minimum 2.0

Feature : Rope Anchors
Description : Type
Details : Bolted rope clamp
Remark : For ease of rope replacement

Description : Safety Factor
Details : Minimum 1.1
Remark : Ensures rope breaking strength when over loaded

Feature : Ratios
Description : Drum to Rope
Details : Min.19 : 1
Remark : Drum pitch diameter over rope diameter

Feature : Safety
Description : Drum flange beyond top layer
Details : 2.5 x rope diameter
Remark : To avoid rope jumping out of drum unintentionally

Description : Fleet angle
Details : < 2.5⁰
Remark : Ensures smooth and even rope spooling at all times

Description : Dead turns on the drum
Details : Min.5
Remark : Amount of rope that is not in used even at the
maximum hoist reach of the crane.

Boom Luffing-in limit buffer

Mast
The Luffing sheaves are placed on the mast (A-frame) which is fitted with a top platform
for maintenance and inspection of the mast head sheaves, luff hoist rope and anchor
connections. Access to the Top Platform is by ladder from the machinery deck. The
mast is pin connected to the machinery deck.

Bridle
N/A

Slew Mechanisms
Slew Bearing
Brand- ROTHE-ERDE XUZHOU or equivalent
Rolling Element- Triple Cylindrical Roller
Lubrication
- Grease holes in diagonal orientation in outer ring
- Lubrication lines are fitted on the machinery deck for refilling grease into the bearing

Slew Drive
Type- Fixed displacement hydraulic motor
Gearbox- Epicyclical
Brake- Oil immersed multi-disc brake(s)
Operating Conditions- Slew design wind speed 24m/s
Pinions- Four(4)
Emergency slewing is possible with one (1) pinion

Boom
Length- 45M & 47M
Type- Reinforced Lattice Structure
Pins- High Tensile
Connectors- Cast Steel
Welding Test- NDT 100% MPI, 100% UT/RT
Boom Top Platform- Both Sides
Safety
Hardwood blocks- To prevent rubbing of ropes on boom bracing damaging paint and
cause unnecessary rusting.
Walkway paths- 760mm wide grating along and inside of boom for maintenance access
Handrails- Along boom section

Boom Bottom
Type- Reinforced Lattice Structure
Material- High tensile low alloy low carbon seamless chords with mild steel bracings

Boom Intermediate Section
Type- Reinforced Lattice Structure
Material- High tensile low alloy low carbon seamless chords

Boom Head
Type- Reinforced Lattice Structure
Material
- High tensile low alloy low carbon seamless chords
- With Mild Steel Bracings
- High Strength Steel Head Plate

Reeving System
Sheaves
Materials- Steel
Processing Technique- Cast
Ratio- 20 : 1 (Sheave diameter / Rope diameter)
Lubrication- Lubrication through sheave pin
Bearing- Heavy duty sealed cylindrical roller

Ropes
Rope Size (mm)
Main Hoist and Auxiliary Hoist : Minimum 5.0
Luff Hoist and Pendant : Minimum 4.0

Rotation Characteristic -
Main Hoist and Auxiliary Hoist : Non-Rotating
Luff Hoist : Low Rotation
Pendant : Non-Rotating

Construction -
Main Hoist and Auxiliary Hoist : RH and WSC
Luff Hoist : RH and IWRC
Pendant : WSC

End Connections : Solid Thimble
Finishing : Compacted and Galvanized

Hooks
Basic design factor of the hook is more than 4.0. The hooks are made of cast
steel and tested to -40°C, or -6°C below lowest design temperature. All hooks
come with lockable safety latch and swivel bearings. Hook blocks will be of
significant weight to prevent unraveling of rope while unloaded.

Machinery Deck
Machinery Turret
Basic design factor of the hook is more than 4.0. The hooks are made of cast
steel and tested to -40°C, or -6°C below lowest design temperature. All hooks
come with lockable safety latch and swivel bearings. Hook blocks will be of
significant weight to prevent unraveling of rope while unloaded.

Operator Cabin
Structure- 5 mm steel plate
Floor Area- 1685mm x 1300mm
Position- Port of crane
Acoustic Shield- Noise level during operation ≤ 75 dBA
Weather Shield- Complete sealed through for water runoff

Visionary
Forward Windows- Clear Safety Glass
Side Windows- Clear Safety Glass; open-able
Rear View Mirror- N/A

Safety Equipment
Safety Bar- Front & side windows to prevent accidental fall
Horn- Electric warning horn
Fire Extinguisher- 1.5kg Dry Powder

Accessibility
Headroom- 2.1 meters
Door- Side slip door with lock
Maintenance
- Removable panels for access to cables & hoses
- Rooftop access for air conditioner maintenance
- Side access to front of cabin for window clearing and wiper replacement

Other Accessories
Chair- Fully adjustable cushioned type
Hour Meter- Digital / Analog
Communication-
Equipment (PA Speakers Telephone set, VHF/UHF radios and lound speaker with
microphone system) free issue by shipyard.
Control Console- See Controls and Instruments
Power- Power socket
Lighting- See electrical system
Windshield Wiper- Electrical type
Air Conditioning- Roof top unit
Engraved Stainless Steel Plate
- Design certified load chart
Rope specification chart
- API monogram

Prime Movers
Prime Mover Data – Diesel Engine
Brand : Caterpillar
Model : 3406
Rating : 345KW @ 1800RPM

Starting System -
Primary Battery : Attempts x seconds
Secondary : Attempts x seconds

Drive Output -
Primary Battery : Splitter Gearbox

Consumables -
Primary Battery : Fuel Grade
Secondary : ASTM D975 No.2-D Diesel fuel or equivalent

Primary Battery : Coolant
Secondary : ASTM D4985 or equivalent

Primary Battery : Lubrication
Secondary : API CG-4 oils or equivalent

Prime Mover Sizing
The prime mover is appropriately sized for the following conditions:
1 operation @ full load with full speed

Safety Features
Cabin
An annunciator is mounted in the cabin to alert the operator of possible risky
crane operation to avoid unfavorable incidents. This will be a solid state unit “first out” alarm
sequence giving both audible and visual warning and fitting with test and acknowledgement buttons.

The audible and visual alarming signals are provided as following :

- High Return Pressure(filter jammed)
- Hoist Up Limit
- Hoist Down Limit
- Luff Up Limit
- Luff Down Limit with override for stowing
- Engine Overspeed
- Engine Water High Temperature
- Engine Lube Oil Low Pressure
- Engine Fuel Low Pressure
- Hydraulic Temperature High
- Hydraulic low level

Powerpack
The following are provided at the power pack for status monitoring:
- Engine Lube Oil Pressure Gauge- Engine Lube Oil Temperature Gauge
- Engine Fuel Pressure Gauge- Engine Water Temperature Gauge
- Engine Tachometer- Engine Emergency Stop Button
- Fuel Tank Level Switch- Hydraulic Oil Level Gauge
- Hydraulic Pump Cavitations- Hydraulic Pump Filter Indicator

Crane Operation Limit
Limit switches are provided to define safe working limits of all crane operations
including hoisting and luffing.

Operation : Main/Aux. Hoist
Detection Level : Upper Working Limit
Action : Stop Up Motion
Deactivation : Hoist Down

Detection Level : Lower Working Limit
Action : Stop Down Motion
Deactivation : Hoist Up

Operation : Boom Hoist
Detection Level : Lower Working Limit
Action : Stop Boom Down Motion
Deactivation : Boom Up or Override for Stowing

Detection Level : Upper Working Limit
Action : Stop Boom Up Motion and A&V warning
Deactivation : Boom Down

Detection Level : Ultimate Up Limit
Action : Stop Boom Up Motion and A&V warning continued
Deactivation : Boom Down

Luff-in decelerator and stop in limit is controlled by the incoming boom and provides gradual
deceleration until minimum radius. Operation shutdown occurs and luff brakes automatically
engage overriding the manual control in the operator cabin.

Safe Load Indicator
The Safe Load Indicator will provide the following to the operator:

- Crane rated capacity (T)
- Actual load on hooks (T)
- Boom radius (meters)
- Boom angle (Deg rees)
- Visual alarm at 90% SWL
- Intermittent horn at 100% SWL
- Loud continuous horn at 105% SWL
- Overload cut off switch
- Mechanical boom angle installed at the boom where visible from operator cabin

Standard Practises

- All ladders are welded with square rungs in diamond orientation with ladder cages.
- All handrails are made of galvanized pipe 48.3mm OD, except those on boom sections
for weight saving purposes
- Cable trays are SS316 perforated. Cables and hoses are secured with SS cable ties.
- All machined pins, end covers, and small adaptors are zinc plated to approximately 15
micron thickness.
- All fasteners M12 and below used are SS304. All fasteners above M12 are Grade 8.8 or
equivalent, fluorocarbon coated.
- Slew bearing fasteners are ISO Grade 10.9, fluorocarbon coated
- Clear labels on all critical equipment onboard
- SS304 and/or white traffolyte with black inscriptions are chosen as standard for labeling

Surface Treatement
External Treatment :
Pedestal, crane house and boom -
- Surface preparation to ISO 8501-1, SA 2.5
- First coat zinc rich epoxy primer to 50 µm dry film thickness
- Second coat two pack epoxy to 100 µm dry film thickness
- Third coat polyurethane finish to 65 µm dry film thickness
- Total : three coats to 200 µm dry film thickness

Internal Treatment :
Pedestal and crane house -
- Surface preparation to ISO 8501-1, SA 2.5
- First coat zinc rich epoxy primer to 40 µm dry film thickness
- Second coat two pack epoxy to 75 µm dry film thickness
Oil tank (integrated in crane house) -
- 16.2.2.1 Surface preparation to ISO 8501-1, SA 2.5
- 16.2.2.2 First coat zinc rich epoxy primer to 40 µm dry film thickness

Boom -
No treatment as fully closed steel box structure

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
--------------------------------------------------------------
Search words (for official use only) -
Offshore Lattice Boom Crane for sale
Offshore Crane - 80 Ton - For Sale
80 ton Offshore Lattice Boom Crane
New Offshore Crane for Sale
New 80 ton Offshore Crane for Sale
80 ton New Offshore Crane
--------------------------------------------------------------

Offshore Lattice Boom Crane - 80 Ton - New for Sale

ID 1091

Worldoils Marketplace

Worldrigs ID: WR962

Cameron Accumulator for sale
Cameron Closing Unit for sale
Drilling Equipment - Accumulator for Sale

Description
AWK Control System
Accumulator : Class 67AS (complete system)

This closing unit ws built for an offshore program in the Beaufort Sea.
It was designed to shear a 9" Drill collar.

Quantity : 1
Enclosure with skid.
AWK control system
1 AWK shear closing unit, 3 valve, 2 air pump,1 electric pump and a 280
gallon reservoir

Quantity :1 - Drillers control panel
Quantity : 1 - Toolspushers control panel

Quantity : 1
Assembly- Accumulator rack
12 each 9.7” diameter bottles. LH
6000 PSI wp

Quantity : 2
Assembly- Accumulator rack
12 each 9.7” diameter bottles. RH
6000 PSI wp

Quantity : 1
Assembly- Accumulator rack
12 each 9.7” diameter bottles. LH
6000 PSI wp

Quantity : 1
Assembly- Accumulator rack
6 each 9.7” diameter bottles. LH and RH
6000 PSI wp

Quantity : 1
Precharge KIT 6000PSI Hydac Accumulator
Top repairable ,INC Gauge and Hose Assembly
Hydac Model No FPO414 F3 K TR

Quantity : 2
Anchor Shackle G2130CT, Bolt Type with thin Bolt and nut, 7/8” nominal size, 6 ½ tonne
working load Limit,1.44 Throat x 1 Pin diameter per DNV rules for lifting Appliances- Loose
gear individually serialized with certification.
Bow and bolt to meet charpy impact testing of 31 Ft/lbs Min Avr Tem-4F

Quantity : 1
Sling, 2-leg ¾” – 6X19 KIP/IWRC 96” complete with master link and thimbles each eye,
both ends no sleeves c/w certificate of testing

Quantity : 1
Interconnect electrical cable for drillers panel 1
Interconnect electrical cable for Toolpushers panel

Quantity : 1
Sing: type MO3 Use ear protection diameter 200MM.Material PVC –Foil adhesive

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------
Search words (for official use only) -
Cameron Accumulator For Sale
Used drilling Accumulator for sale
Drilling Equipment - Accumulator
Accumulator for sale
--------------------------------------------------------------------

Cameron Accumulator for sale

ID 962

NGL Fractionation Storage Tanks - Built 1974

Worldoils Marketplace

Worldrigs ID: WR1348

LPG Storage Tank for Sale
NGL Fractionation Storage Tanks - Built 1974
30,000 Gallon NGL Fractionation Storage Tanks for Sale

Description
Quantity : 1
Manufacturer : Trinity
Year : 1974
Dimensions : 109" OD x 47' OAL
Pressure : 250 psi
Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------------------------------------------------------
Search words(for official use only) :
LPG Storage Tank for Sale
30,000 Gallon NGL Fractionation Storage Tanks for Sale
1974 Built - 30,000 Gallon NGL Fractionation Storage Tanks
Used NGL Fractionation Storage Tanks for Sale
LPG Storage Tanks for Sale
NGL Fractionation Storage Tanks - Built 1974
LPG NGL Storage Tanks for Sale
Used 30,000 Gallon NGL Fractionation Storage Tanks for Sale
------------------------------------------------------------------------------------------------------------------------------

Used NGL Storage Tank - 30,000 Gallon 1974 Built - For Sale

ID 1348

Atlas Copco T4W DH Drilling Rig - 2016 Built - For Sale

Worldoils Marketplace

Atlas Copco T4W DH Drilling Rig - For Sale

ID 811

Mack Coiled Tubing / Flushby Combo Unit

ID 1080

Worldoils Marketplace

Schramm T130 Drilling Rig - For Sale

ID 846

Featured equipments for sale

Caterpillar 637G Wheel Tractor Scrapers - For Sale

Worldoils Marketplace

Worldrigs ID: WR590

Caterpillar 637G Wheel Tractor Scrapers For Sale
Mining Equipment - 2011 Caterpillar Wheel Tractor Scrapers

2011 Caterpillar 637G

Engine ARR 219-9507 S/N RHX10868
Transmission ARR 238-0255 S/N MWK01257
Rear Engine ARR 221-8050 S/N THX34380
Rear Transmission ARR 198-6395 S/N CWE01017
Scraper Bowl S/N DEX00420
Catalog # : CU1747011
SMU/Hrs : 1579

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

Caterpillar 637G Wheel Tractor Scrapers - 2011 built For Sale

ID 590

Multi purpose vessel - 1982 Built for Sale

Worldoils Marketplace

Worldrigs ID: WR1896

Multi purpose offshore vessel for sale
Offshore Vessel - 1982 Built for Sale

Description :

Type : Multi purpose offshore vessel
Dimensions : L: 36.5m / B:10.2m / D: 3.02m
Class : Bureau Veritas
Build : 1982
Accom / Pax : Total Berths 30 Berths
Machinery : 2X Volvo TAMD 120A Power Total : 424 KW (TTL 576 HP)
Speed : Cruising Speed : 8 Knots
Deck :
*Stern A-Frame 1 X 10T SWL Hydraulic *Telescopic Cargo Crane:1 X 3.2T Tadano Super

Capacities :
Capacities Fuel Capacity 109MT Fuel Consumption 1.2MT/Day
Water Capacity 82.14 MT Water Making 12MT/Day Autonomy 21 Days

Location : UAE

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------------------------------------------------
Search words (for official use only) -
1982 Built Multi purpose offshore vessel for sale
30 Berths Accomodation Capacity offshore vessel
Multi purpose offshore vessel 36.5m for sale
36.5m offshore vessel for sale in UAE
Multi purpose offshore vessel for sale in UAE
--------------------------------------------------------------------------------------------------------------------

Multi purpose offshore vessel - 1982 Built for Sale

ID 1896

Worldoils Marketplace

Worldrigs ID: WR643

Ocean Going Tug for sale
1340 HP Ocean Going Tug - For Sale
1996 Built Ocean Going Tug For Sale

Year of built : Nov 1996

Principal dimensions :
Length overall : 25.00 m
Length B.P. : 23.50 m
Breadth moulded : 7.50 m
Depth moulded : 3.20 m
Draft design : 2.50 m
GRT/NRT : 174/52

Capacity :
F.W. Capacity : 30 tonnes
F.O. Capacity : 115 tonnes
F.O. Consumption : 4.7 T.P.D.
Cruising F.O. Consumption : 3.8 T.P.D.
Endurance : 28 days

Nozzle : 2 kort nozzles

Navigational equipment :
Furuno FS-1500
Furuno FM-2510/DC24V/25W
Furuno 1941
Furuno GP 50
Furuno FCV-665
PA system

Accommodation :
10 persons (air conditioned)

Main propulsion :
Twin caterpillar D.3412 TA BTA
2 x 671 bhp

Gear box :
Twin disc 520-2

Bollard pull : 15 tonnes

Speed : 10 knots

Auxiliaries :
Generators
2 x cummins 4 BT 39 (m)
GCI 415V/50 HZ/40 kW

Ocean Going Tug - 1340 HP - For Sale

ID 643

Speedstar DSI QuikDrill Drilling Rig for Sale

Worldoils Marketplace

Speedstar DSI QuikDrill Drilling Rig - For Sale

ID 1046

Deck Cargo & Ballast Tank Spud Barge for Sale

Worldoils Marketplace

Worldrigs ID: WR1989

Deck Cargo & Ballast Tank Spud Barge for Sale
64m Deck Cargo & Ballast Tank Spud Barge

Description :
Type : Deck Cargo & Ballast Tank Spud Barge
Dimensions : Loa : 64m / B:21,3m / D:2,86m
Class : ABS A1 Deck Cargo Barge & Ballast Tank Barge

Build : Under construction delivery 2012
Deck : Deck load : 20 ton / m2 Deck Plate : 16mm
Capacities : Cargo Deadweight : Approx. 2175 Tonnes
Location : Far East

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Deck Cargo & Ballast Tank Spud Barge in Far East
64 m Deck Cargo & Ballast Tank Spud Barge
Deck Cargo & Ballast Tank Spud Barge for Sale
2012 Built Deck Cargo & Ballast Tank Spud Barge
---------------------------------------------------------------------------------------------------------

Deck Cargo & Ballast Tank Spud Barge for Sale

ID 1989

Worldoils Marketplace

Cabot 1500Hp Rig for Sale

ID 2194

Worldoils Marketplace

Worldrigs ID: WR1810

ASD Tug Boat for Sale
New ASD Tug for Sale

Description :

Type : ASD Tug
Dimensions : 28m x 10m x 4.8m
Class : BV + FIFI 1 / Water Spray
Build : NB (just launch)
Accom / Pax : 8 person
Machinery : 2 x Yanmar 6N21A – SW (Each 883kW at 850 RPM)
Speed : Max 12knot
Capacities :
Fuel Oil : 116t
Fresh Water : 38t

Location : S.E.Asia

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need, please send us an
email to mail@worldoils.com stating your requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed

----------------------------------------------------------------------------------------------------
Search Words (for official use only) :
ASD Tug for Sale
8 person Accommodation ASD Tug for Sale
ASD Tug for Sale in Asia
New ASD Tug for Sale in Asia
28m ASD Tug Boat for Sale
-----------------------------------------------------------------------------------------------------

ASD Tug for Sale

ID 1810

Worldoils Marketplace

Worldrigs ID: WR833

Driltech D40K Drill Rig for Sale
Drilling Rig - Driltech D40K For Sale
Used Drilling Rig for sale in USA

Model : D40K drill rig
Manufacturer : Driltech
Year : 2000
Condition : Used

Description :

2000 Driltech D40K drill rig
Sullair 1170 cfm / 350 psi air compressor
CAT 3456 disel deck engine
70000 lbs of pullback
Water injection pump
Hammer lubicator
Carousel
Mounted on a stering Truck
CAT C-12 diesel engine
Location : USA

Price & terms : Please enquire using the email form below

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------------------------------------
Search words(for official use only) -
Driltech D40K drilling Rig for sale
Used Driltech D40K Drill Rig For Sale
Land Drilling Rig 2000 Built for sale
Driltech D40K Drill Rig
Drilling Rig For Sale in USA
Oilfield Drilling Rig for Sale in USA
--------------------------------------------------------------------------------------------------------------

Driltech D40K Used Drill Rig for sale

ID 833

Worldoils Marketplace

Worldrigs ID: WR1817

Tug Boat for Sale
Tug Boat - 1982 Built for Sale

Description :

Type : Tug Boat
Dimensions : Loa : 27,62m / B:7,30m / D:3,21m
Class : Rina
Build : 1982 Built
Accom / Pax : 6pax.
Machinery :
Main engine: N.1 Nohab Diesel typeF38A
1860bhp
Speed : 12 knots
Capacities :
Bollar Pull:30 Tons
gasoil and fresh water capacities: 65MT -57MT

Location : Black Sea

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------------------------------------
Search words (for official use only) -
1982 Built Tug for Sale
6 Passenger Accommodation Tug Boat
27.62m Tug Boat for Sale
Tug for Sale
Tug Boat - 27.62m for Sale
------------------------------------------------------------------------------------------------------------

Tug Boat for Sale

ID 1817

Geoprobe 54DT Soil Sample Drilling Rig for Sale

Worldoils Marketplace

Geoprobe 54DT Soil Sample Drilling Rig - For Sale

ID 2993

Worldoils Marketplace

Worldrigs ID: WR2827

Crew Boat - 2005 Built - For Sale
2005 Built/Refitted Crewboat for Sale

Description :

General
Year Built / Refitted : 2005
Tonnage : 98-GRT, 67-NRT
Zero Discharge Capable

Main Particulars
Length Overall : 157.0 Ft.
Beam (Hull) : 29.0 Ft.
Beam (Max.) : 31.5 Ft.
Depth : 14.0 Ft.
Draft (Light) : 5.75 Ft.
Draft (Max.) : 9.25 Ft.
Air Draft : 42.0 Ft.
Displacement (Lightship) : 165.4 Lt
Displacement (Max.) : 490.0 Lt

Performance
Speed Light Boat : 25 Kts @ 190 gph
Speed Loaded : 21 Kts @ 265 gph

Deck Cargo
Clear Deck : 100ft X 25ft
Tonnage : 225 Lt (As Per Stability Letter)

Capacities
Fuel : 133.95 M3
Rig Water (Potable) : 192.33 M3
Ships Potable : 4.16M3
Lube Oil Tank : 0.61 M3
Dirty Oil / Bilge Water : 5.51 M3
Rig Water (Grey) : 26.54 M3
Sewage Holding Tank : 3.74 M3
Grey Water Holding Tank : 2.04 M3

Accommodations
Passengers : 65 (Seated)
Staterooms : (6) 2-Man (12 Total Bunks)
Heads : 2
Galley Seating : 8
Air Conditoning/Heating : 3 Units
Walk-In Cooler : 196 Cubic Feet
Walk-In Freezer : N/A

Transfer Rates
Fuel : 240 GPM @ 150 ft.
Rig Water (Potable) : 240 GPM @ 150 ft.

Machinery
Total Horsepower : 6,300 Bhp
Main Engines : (4) Cat 3512B @ 1575 Hp
Gears : (4) 2.52:1 ZF 4600
Propellers : 50 X 50 4-Blade
Bow Thrusters : Cat 3306 With 125 Hp Key Power
Generators :
(2) 75 Kw John Deere 6068 TFM76

Fire Monitor(S) : 1000 GPM

Additional Equipment
Davit Retrieval System : 1 Stbd. Side
Anchor Windlass : 1000ft 1 in cable, 750 lb anchor

Electronics
VHF : 3
SSB : 1 Furuno
Radars : 2 Furuno
GPS : 1 Furuno
Compass : 1 Magnetic
AIS System : 1 Furuno
Navtex : 1
Depth Sounder : 1 Furuno

Price & terms : Please enquire using the email form below

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
-----------------------------------------------------------
Search words (for official use only) :
157FT Crew Boat for Sale
25 Knots Crew Boat for Sale
65 Passenger Crew Boat for Sale
Crew Boat - 157ft - for Sale
47.85M Crewboat for sale
-------------------------------------------------------------

Crew Boat - 157ft - for Sale

ID 2827

Used Dresser Rand D6R/S compressor - For Sale

Worldoils Marketplace

Worldrigs ID: WR2925

Dresser Rand D6R/S compressor for Sale

Used Dresser Rand D6R/S compressor - For Sale

Description :

Compressor	Axial y Centrifuge	Weigh
Type	DO6R7S	3800
Manufacturer	Dresser Rand	-
Fluid type	H2S+HC+H2	-
Weight Flow (Kg/hs)_Normal	10 077	-
Torque	476 N.M.	-
Pressure	1200 PSIG	-
Operating Speed	1246 RPM	-
Trip Speed	1497 RPM	-
Electric Motor	-	6390
Power	0,875MW	-
Operating Speed	1475 RPM	-
Trip Speed	1550RPM	-
Baseplate	-	12200
Gas Seal instruments board	-	1810
Pipping+Misc	-	1669
Gear	-	1705
Total Weight	-	27574

Price & terms : Please enquire using the email form below.

Dresser Rand D6R/S compressor - For Sale

ID 2925

Coiled Tubing Unit - 80K Trailer Mounted - for Sale

ID 976

Worldoils Marketplace

Worldrigs ID: WR738

NGL/LPG Tanks for Sale
Used 90,000 Gallon Propane, LPG, NGL Storage Tanks for Sale
1982 Built - Propane, LPG, NGL Storage Bullet Tanks for Sale

Description
Quantity : 2
Manufacturer : Dacro
Year : 1982
Pressure : 250 psi
Location : Mid-west

Price & terms : Please enquire using the email form below.
If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------------------------------
Search words(for official use only) :
LPG/NGL Storage Bullet Tanks for Sale
Used 90,000 Gallon Propane, LPG, NGL Storage Bullet Tanks for Sale
90,000 Gallon Used Storage Bullet Tank for Sale
Propane, LPG, NGL Storage Bullet Tanks
Used NGL/LPG Tanks for Sale
NGL/LPG Pressure Vessels - 1982 Built
90,000 Gallon Propane, LPG, NGL Storage Bullet Tanks for Sale
1982 Built 2 Storage Bullet Tanks for Sale
2 Used Propane, LPG, NGL Storage Bullet Tanks for Sale
-------------------------------------------------------------------------------------------------------------------------------------

Used Propane, LPG, NGL Storage Bullet Tanks - 90,000 gallon - for Sale

ID 738

Worldoils Marketplace

Worldrigs ID: WR690

Tugboat for Sale
1000hp Tugboat For Sale
1996 built Tugboat for Sale

General
Year Built : 1996
Class : GL

Length O. A : 21.50 M
Breadth : 7.30 M
Depth : 3.50 M
GRT / NRT : 139 / 42

Main Engine :
2 X 375KW Cummins – KTA 19M @1800 RPM

F.O. : 94.5 M3 (approx)
F.W. : 30 M3 (approx)

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
------------------------------------------------------------------------------------------
Search words(for official use only) -
Tugboat for sale in Singapore
1000HP - 1996 built Tugboat for sale
Used Tugboat for sale in Asia
Tugboat for sale
1000HP Tugboat for sale
1996 built Tugboat for sale
------------------------------------------------------------------------------------------

Tugboat - 1000 hp - for sale

ID 690

Worldoils Marketplace

Worldrigs ID: WR2646

New Hose Float - For Sale
Offshore Hose Float for Sale

Description :

Hose & Cable Floats are primarily meant for the Single Point Mooring.
Mining and Cable Floatation applications. The floats have open roundes
edges to provide flexibility of movement to the hoses/cables to adjust
to currents and wind. Rubber pads are provided for tight fitment.
Floats are PU filled as a standard.

Application :

Single Point mooring
Floating Pipes for gold and other mines
Floating cable offshore

Small area marking

Pipe Size	ID	OD	Length	Approx Byoyancy(kgs)	Approx Floats/100m at SG2.4at 50%solids
Upto110mm	110	300	600	21	23
130mm	130	300	600	20	33

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------
Search words (for official use only) :
Hose Float -110mm for Sale
600 length Hose Float for Sale
PU filled Float for Sale
130mm Hose Float for Sale
Dredging Hose Float for Sale
-------------------------------------------------------------------------------

Hose Float - For Sale

ID 2646

Worldoils Marketplace

Worldrigs ID: WR310

The Future of the Offshore Drilling Industry to 2015 - Market Analysis,
Capital Expenditure and Competitive Landscape
Drilling Industry Future report
Offshore Drilling Future - report

The report provides a complete overview of the future prospects of the
offshore drilling business with forecasts of the offshore drilling expenditure
to 2015. It analyzes the offshore drilling expenditure in the major regions
of the world’ includes the exploratory and development drilling expenditure
forecasts to 2010. The report discusses the top lease holders like BP Plc,
Anadarko Petroleum Corporation, Hess Corporation, ExxonMobil Corporation,
Petroleo Brasileiro S.A., Repsol YPF, S.A and analyzes the strategies of
the major offshore drilling contractors such as Transocean Ltd, Noble
Corporation, Diamond Offshore, Ensco International plc, Seadrill.

Report Highlights :

--> Global Offshore Drilling Expenditure is expected to grow to more than
$490 billion in the period from 2009 to 2015

--> South and Central America is expected to be one of the top regions for
Offshore Drilling Expenditure by 2015

--> Increasing trend towards Deep and Ultra Deep water exploration and
production is driving the growth of the Offshore Drilling Industry

The new report “The Future of the Offshore Drilling Industry to 2015 -
Market Analysis, Capital Expenditure and Competitive Landscape” provides an
in-depth analysis of the offshore drilling industry and highlights the various
concerns, shifting trends and emerging regions in the global offshore drilling
industry. The report provides forecasts on the offshore drilling expenditure to
2015. The report includes exploratory and development drilling expenditure
forecasts to 2015. The report also provides an in-depth analysis of the key trends
and challenges in the global drilling industry. The report also discusses the
major offshore projects globally and provides an analysis of the competitive
scenario in each of the geographies. The report is built using the data and
information sourced from proprietary databases, primary and secondary research
and in-house analysis by the team of industry experts.

This report will provide you with...

• Business strategies with the help of specific insights about the offshore drilling industry.
• Opportunities and challenges in the global offshore drilling industry.
• Market positioning of the offshore drilling contractors.
• Future revenues and profitability with the help of insights on the future opportunities
• Critical success factors in the global offshore drilling industry.
• Benchmark your operations and strategies against the major players in the
global offshore drilling industry.

Report Information

Order “The Future of the Offshore Drilling Industry to 2015 - Market Analysis, Capital
Expenditure and Competitive Landscape” before the 30th June and receive a 15%
discount!

• Published: Feb 2010

Please send an email to mail@worldoils.com
----------------------------------------------------------
Search words(for official use only) :
Offshore Drilling report
Offshore Drilling Figures
Drilling Report
Oil Drilling Future - report
Drilling Industry Future - report
----------------------------------------------------------

The Future of the Offshore Drilling Industry to 2015 - Report

ID 310

Worldoils Marketplace

Worldrigs ID: WR497

Supply Vessel For Sale
22M Supply Vessel For Sale

Specifications and list of Standard Equipment

Classification :
Type of class : Bureau Veritas (NonCon)
Type of vessel : Crew/Supply vessel
Type of hull : Aluminium alloy
Passenger : 12 pax

Dimensions :
Lenght overall : 22.24m
Length waterline : 20.47m
Beam (maximum) : 5.66m
Draught (full load) : 1.10m
Depth at sides : 2.75m
Weight (full load) : 70 tonnes

Tank Capacities :
Fuel oil : 10,000 litres
Fresh water : 28,000 litres

Performance :
Maximum speed : 20 - 22 knots
Crusing : 20 knots

Propulsion System :
Main engine :
2 x Cummins KTA 19 - M3
600bhp @ 1800 rpm
Continuous duty rating
Propulsion : Twin conventional screw

Auxiliary Equipment :
Generator :
2 x Perkins (or equivalent) marine diesel generator
Rating : 17.5KVA, 230V, 50Hz, single phase
Bilge/GS : 4 x TMC submersible bilge pump

Deck Equipment :
Anchors : 1 x 60kg
Chain : 1 x 1.5m studlink chain
Blower : 2 x in-line blower

Joinery and Arrangement of Service Spaces :
- Accommodation room for 4-6 persons
- Daikin split air conditioning (2 x18,000 BTU) or equivalent
- Toilet
- Pantry

Hull and Superstructure :
- Welded aluminium alloy hull
- Structure frame (2 watertight)
- Wheelhouse
- Welded aluminium tampered/toughened glass windows with frame
- Kapur timber deck
- Aluminium fuel tank
- Aluminium bow rail
- Aluminium side rail

- Aluminium aft rail
- Main deck engine hatch
- Aluminium mooring bitt
- Aluminium side border
- Fully welded strong aluminium engine bed
- 12 passenger seat + 2 crew seats
- Helmsman chair & commander chair c/w base
- Aft lockable door

- Stbd side lockable door
- Rudder's room hatch
- Tank's room hatch
- Fender eye plates
- Anodes base
- 4 clear view
- 1 x hydraulic steering systems(forward of wheel house) & 1 x
hydraulic steering systems (aft of wheel house)
- Wet exhaust system

Nautical, Navigation and Communication Equipment :
- Navigation lights and switches
- Masthead lights, search light
VHF radio : Icon M302
Compass : Magnetic compass
GPS : Furuno GP 32
Radar : Ray marine SL 70

Paints and Coatings :
Painting to colour with marine polyurethane paint

Fire Fighting Equipment and Life Saving Apparatus :
Fire Fighting Equipment :
8 x 9kg ABC dry powder, 1 x 45 litres form trolley,
1 x engine driven pump, 1 x electrical driven pump
and 2 x 2" x 15m c/w nozzle fire hose

Life Saving Equipment :
Life jacket and 20-pax life raft

Construction Material :
Welded Aluminium Hull
- Bottom of hull : 8.0mm
- Side of Hull : 8.0mm
- Main decks : 6.0mm
- Superstructure : 6.0mm
- Engine bed : 10mm - 12mm

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------
Search words(for official use only) -
Supply Vessel For Sale
Offshore Supply Boat For Sale
Supply/Crew Vessel For Sale
Used Supply Vessel
Used Supply Vessel For Sale
------------------------------------------------------------

Supply Vessel For Sale

ID 497

Worldoils Marketplace

Worldrigs ID: WR285

SK 775D Carrier Mounted Drilling Rig for Sale
Carrier Mounted Drilling Rig for Sale

Description

Drawworks :
Service King-775D (775 HP)

Power :
(2) 500 HP Detroit 60 Series Diesel Motors

Mast & Substructure :
Derrick Mast Model #SK112-350., Rated Capacity of 350,000 Lbs
12’ KB Substructure, Rated Capacity of 300,000 Lbs

Rotating & Traveling Equipment :
Rotary Table- Sentry S1-RT 17 ½” e
Blocks/Hook- Sentry 190 Ton
Hydraulic Kelly Spinner
Varco Hydraulic Pipe Spinners

Generators :
320 KW Generator with 3406 CAT Motor
365 KW Generator with 3406 CAT Motor

Air Compressor :
100 Gal Tank w/2 Cycle Quincy Pump Driven
by a 20 HP. Electric Motor

Mud Pumps :
(2) F-1000 Triplex Pumps with D-398 CAT Motors

B.O.P. Equipment :
Annular Preventer- N.A.
BOP- Shaffer 11” x 5M Double Ram
5 Station, 100 Gal. Accumulator
Choke Manifold- Swaco 3-1/8’’ X 5M

Mud Systems :
400 Bbl Mud Tank System
(2) Swaco Mongoose Shale Shakers
Swaco 2 Cone Desander
200 Bbl Pre-Mix Pit

Tubulars :
6200’ G105 Drillpipe With 4-1/2’’ XH Connections
1100’ 4-1/2’’ HWDP with 4-1/2’’ XH Connections
(15) 6 ½” Drill Collars with 4 ½” X-Hole Connections

Pipe Handling Equipment :
Tongs- 1 Set BVM Denver Type C Tongs. 1 Set Varco BJ HT55 Tongs
Pipe Spinners- NOV SSW-30 Hydraulic Pipe Spinner
Slips- 4-1/2’’DP, 6’’DC,
Collar Clamp
Elevators- WTM 225T 4-1/2’’ DP
Lift Subs for Drill Collars

Assorted crossover, bit subs :
6’’ Hex Kelly
4’’ Square Kelly
3 Sets Pipe Racks
Wireline Machine
Pressure Washer
Mud Bucket

Spare Rotary Table

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Carrier Mounted Drilling Rig for Sale
775 hp Service King Drill Rig for Sale
Drill Rig - 775hp for Sale in USA
Service King Carrier Mounted Drilling Rig in USA
SK 775D Carrier Mounted Drilling Rig in USA
---------------------------------------------------------------------------------------------------------------

SK 775D Carrier Mounted Drilling Rig for Sale

ID 285

Worldoils Marketplace

Worldrigs ID: WR728

Maintenance Work Vessel for sale
66M Maintenance Work Vessel for sale in USA
New Maintenance Work Vessel for sale

General :
Classification : BV
Length overall : 66.60 metres
Breadth moulded : 20.00 metres
Depth moulded : 6.50 metres
Draft designed : 5.00 metres
Cargo deck area : 600sqm

Main engines : 2 x Cummins KTA50M2, each 1193kw at 1800rpm
Gearboxes : 2 x Reintjes WAF665, Rated 5.05:1
Propulsion : 2 x Mentra Propulsion FPP, each 2,000 dia. c/w kort-nozzle
Steering Gear : 1 shipset Kobelt independent hydraulic gear control system

Generators : 3 x Cummins KTA19-D(M1), each 300kwe
Emergency genset : 1 x Cummins 6CT8.3-D(M), 113kwe
Bow thrusters : 1 x Kammome FPP type,
Norminal thrust : 7.00 tonnes
Bow thruster c/w gear box : 1 x Cummins KTA19-M3

Navigation Area : Unrestricted
GMDSS radio equipment : for area A3

Winches :
ME 4 point mooring winches, 40 tonnes single drum,
local and central remote control

Capstan : 2 x ME, each 6 tonnes
Anchor windlass : 1 x ME, 8.20 tonnes

Crane :
1 x SCM offshore pedestal type complying to API spec., main
boom 43 metres and aux. boom 3 metres, 25.00 tonnes-20 metres
(5.0 tonnes – 46metres)

Life saving & equipment :
Accordance with the requirement of the government authority
for an ocean going tug with total complement of sixty (60)

Rescue boat : 1 x rescue boat with single arm davit c/w engine on board (25hp)

Cabins :
12 x 4 men each = 48 person
4 x 1 men each = 4 person
4 x 2 men each = 8 person

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------
Search words(for official use only) -
Maintenance Work Vessel for Sale
New Work Boat for sale
Maintenance Work Vesses - 66M
66M Maintenance Work Vessel for Sale in Asia
New Maintenance Vessel for Sale
-----------------------------------------------------------------------------------------

Maintenance Work Vessel for sale

ID 728

Subsea Cameron BOP Stack for sale

ID 322

Worldoils Marketplace

Worldrigs ID: WR2259

32M Ocean Going Tug for sale
2007 built Ocean-Going Tug for Sale

General

Classification : Bureau Veritas
Year Built : 2007
Accomodations : 12
Working Speed : 11 Knots
Gross / Net Tonnage : 296 GT ITC / 88 NT ITC

Particulars
Length overall (LOA) : 32 Meters (104.96 Feet)
Breadth Molded : 9.114 Meters (29.89 Feet)
Depth Molded : 4.2 Meters (13.776 Feet)
Extreme Draft : 4 Meters (13.12 Feet)

Main Engines : 2-Cummins 50-M2
Generator : 2-Cummins 6 CTA 8.3-D 125 Kw
Emergency Generator : 1-Yanmar Diesel 32 Kw
Fuel Capacity : 243.6 m3 (64,352 US Gallons)
Fuel Consumption : 1300 US Gallons/Day (Estimated)
Potable Water Capacity : 54.9 m3 (14,500 US Gallons)

Horsepower (Break) : 3600
Bollard Pull (Ahead) : 35 Metric Tons (38 US Tons)

Towing Winch :
Taxing Expansion Marine Double Drum
40 Ton Hydraulic Towing Winch

Towing Wires : 2 Each, 52 mm x 700 m
Lube Oil Capacity : 3.6 m3 (951 US Gallons)

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------------------------
Search words (for official use only) :
32M Ocean Going Tug for sale
2007 built Ocean-Going Tug for Sale
12 Pax Oceangoing Tug - For Sale
Used 32M Ocean Going Tug for sale
Ocean Going Tugboat - 2007 Built - For Sale
-----------------------------------------------------------------------------------------------

Ocean Going Tug - 32m - for Sale

ID 2259

18,000 LPG Propane Tank - 1948 Built - for Sale

Worldoils Marketplace

1948 Built 18,000 LPG Propane Tank - For Sale

ID 2863

279FT Anchor Handling Tug Supply Vessel for sale

Worldoils Marketplace

279FT Anchor Handling Tug Supply Vessel for Sale

ID 2809

Drilling Rig - Continental EMSCO - For Sale

Worldoils Marketplace

Continental EMSCO Drilling Rig - For Sale

ID 2982

Worldoils Marketplace

Worldrigs ID: WR1101

SAEZ TLS 65 Tower Crane for Sale
Used Tower Crane for Sale
2006 built Tower Crane for Sale

Description
Year of manufacture : 2006
36 M hook height
65 M boom
8 TON max capacity

Cabin EKO
Foundation is by anchor
Mint condition

Immediate delivery

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------------------------------
Search words(for official use only) :
SAEZ TLS 65 Tower Crane for Sale
2006 built Tower Crane for Sale in Europe
Tower Crane - SAEZ TLS 65 - for Sale
Used SAEZ TLS 65 Tower Crane for Sale in Europe
Used SAEZ TLS 65 Tower Crane for Sale
Tower Crane - 8 ton Max Capacity - For Sale
---------------------------------------------------------------------------------------------------

SAEZ TLS 65 Tower Crane for Sale - 2006 built

ID 1101

Worldoils Marketplace

Worldrigs ID: WR1999

Accommodation Crane Barge for Sale
300 Men Accommodation Crane Barge

Description :

Type : Accommodation Crane Barge
Dimensions : Loa:111,3m/B:30,48m/Draft max:4.85m
Class : ABS
Build : 2008 built
Accom/Pax : ACC:300 men
Deck : Clear Deck Area: 2000m2 Deck Strength: 20 T/sq.m
Capacities : Fuel oil: 1030m3 fresh water: 1300m3
Dead weight : 13942mt 8 point mooring

Location : Asia

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Accommodation Crane Barge - 300 men - For Sale
2008 Built Accommodation Crane Barge
111.3m Length Accommodation Crane Barge for Sale
300 men - Accommodation Crane Barge
Accommodation Crane Barge for Sale in Asia
---------------------------------------------------------------------------------------------------------

Accommodation Crane Barge - 300 Men - for Sale

ID 1999

Worldoils Marketplace

Worldrigs ID: WR1918

Superior 1000 Mechanical Drilling Rig for Sale
2006 Built Superior Drilling Rig for Sale

Description :

Drawworks:
Superior 1000M New (2006) Single Drum Drawworks, 1,000 Hp
Lebus grooved for 1-1/4” Drilling Line, Air operated Makeup
& Breakout Catheads, Over-Running Clutch, Air
Driller’s Console, Crown-O-Matic, Right Angle drive for rotary table.

Compound:
2-Engine, In-Line Compound, w/ Right Angle Drive RT
Box For rotary & Draw works drive

Brake:
PARMAC Dual V-80 Hydromatic Brake coupled together

Drawwworks Power:
No. 1 – CATERPILLAR C-18 Diesel Engine S/N# WJH01728,
600 Hp Rated, w/24 Volt Electric Start, Radiator, Gauges,
OILWORKS C-195-100 Torque Converter S/N3444
Air clutch
Hours# 21,597
No. 2 – CATERPILLAR C-18 Diesel Engine S/N# WJH01706,
600 Hp Rated, w/24 Volt Electric Start, Radiator, Gauges,
OILWORKS C-195-100 Torque Converter S/N1616
Air clutch
Hours# 21,664

Mast:
DRILLMASTER New 2008 SN#07632 20’1 1”W x 136’H Cantilever Mast,
With a Gross Nominal Capacity of 930,000 Lbs. and a
650,000 Lb. Static Hook Load, Max wind 91 Knots,
with ten (10) lines. Crown Block w/ (5)42” Sheave Cluster &
1-56”Fast line Sheave grooved for 1-1/4” diameter drilling line.
Each Crown Sheave wire rope groove is flame hardened.
Each Crown Sheave is fitted with Timken roller bearings and grease seals.
Derrick complete with Crown Safety Platform, 20 finger Racking Board W/ electric mule,
Bridal Lines, Tong Counter Weights, Survey Line Sheaves,
Tugger Sheaves, Ladder, Derrick Climber, Geronimo line,
4” Standpipe & Manifold and
Derrick Stand.
Last Certification 8/23/2012

Substructure:
DRILLMASTER New (2009) 29’10”W x 20’H x 48’8”L
(4) Box-On-Box Substructure w/ Rotary Beams, V-Door Ramp,
Stairs, (2) Air Receiver Tanks, NATIONAL Deadline Anchor,
Safety Rails, inside Catwalk Trolley, 7’W x 14’L built in Tool
Room (ODS) (3) Stairs, Outside wall Winterized, Jacking door,
12’ X 12’ Setback spreader, internal stairway, Vapor proof lighting,
Skidded with oilfield tail rolls

Pump: (Primary)
HT F-1000 Triplex Mud Pump New 2006,
S/N HT 20060088, 1,000Hp.
w/ LANZOU Pulsation Dampener S/N HT20060070,
MF 5,000 Psi. Pressure Gauge
FIVE STAR 6”x8”x14” Charging Pump S/N5268 p/b TECO 75 Hp. Electric Motor,
Chinese 3”Shear Relief Value, Master Skidded w/ (2) Engines belt compound

Pump Power:
CATERPILLAR C-18 Diesel Engine S/N WJHO1283,
575 HP w/24 Volt Electric Start, Radiator, Gauges,
V-Belt Drive EATON 18CB500 Air Flex Clutch,
Mounted Pump Master Skid.
Hours # 17,376
CATERPILLAR C-18 Diesel Engine S/N WJH01322,
575 HP w/ 24 Volt Electric Start, Radiator, Gauges,
V-Belt Drive EATON18CB500 Air Flex Clutch,
Mounted Pump Master Skid
Hours#16,277

Pump (Secondary)
HT F-1 000 Triplex Mud Pump New 2006,
S/N HT 20060070, 1,000 Hp.
w/ LANZHOU Pulsation Dampener S/N HT20060069,
MF 5,000 Psi. Pressure Gauge
Five Star 6” x 8” x14” Charging Pump S/N5268 p/b Worldwide 75 Hp.
Electric motor,
3” Shear Relief Valve, Master Skidded w/ (2) Engine belt compound

Pump Power
CATERPILLAR C-18 Diesel Engine S/N WJH-00457,
575 HP w/ 24 volt Electric Start, Radiator, Gauges,
V-Belt Drive, EATON 18CB500 Air Flex Clutch,
Mounted pump Master Skid.
Hours#13,788
CATERPILLAR C1-8 Diesel Engine S/N WJH-00373,
575 HP w/ 24 Volt Electric Start, Radiator, Gauges,
V-Belt Drive, EATON 18CB500 Air Flex Clutch,
Mounted Pump Master Skid.
Hours#16,643

Rotating Equipment:
Rotary Table
Chinese ZP 27-1/2”, New 2006, complies with API split master bushings,
W/ drive shaft coupling.

Swivel
Ideco 300

Kelly
5-1/4” x 42’ Hex Kelly W/ HDS Kelly Drive Bushing

Kelly Spinner
OWI 1500 Kelly Spinner S/N 00475B w/ (2) Air Motors, New

Kelly Valves
Upper Kelly Valve.
Lower Kelly Valve

Travelling Equipment
Sentry Rig Equipment Company
260 Ton Capacity New 2006
4G260 Traveling Block w/ (5) 36” Sheaves, 1-1/4” Line,
Unitized “Hydra-Hook” 260 Ton Capacity

Blowout Preventer and Valves
1 Each -13-5/8" X 5000# Jiangsu Xianz hong Petroleum
Double Gate BOP, Top & Bottom Stud configuration
Including - 1set of 5" Pipe Rams Blocks & 1set of Blind Rams,
With 2 - 4" outlets on each side of Body of BOP

1 Each - 13-5/8" Jiangsu Xianz hong Petroleum ANNULAR BOP
Includes rubber element

1 Each - 13 5/8" X 5000# Type D Drilling Spool W/ - 2" Side Outlet & 3" Side Outlet
[Matched To Choke Manifold

1 Each - Choke Manifold - 3" X 5000# Complete
Inc - Steel Flex Line W/ Flanges To Connect
To BOPS or Drilling Spools

Closing Unit
2008 Jiangsu Xianz hong Petroleum Model FXQ640-6
Closing Unit Accumulator, 6 Station,
Rig Floor Controls and monitor panel,
Complete W/ 15 Bottles, 30 HP Cat 3517 Charge Pump, 21 Air Pumps, & set up
for Nitrogen Bottle Backup
Suitcase Closing Unit Skid 7’-1 0” x 35’ with junk basket

Choke Manifold and Valves
Jiangsu Xianz hong Petroleum Choke Manifold w/ (1) 5-Way Cross,
(3) 4-1/16”x 5M
Gate Valves, (4) 2-9/16” x 5M Gate Valves, (1) Manual
Adjustable Chokes, Hydraulic Adjustable Chokes, Mounted Oil Field Skid.
W/ 2 Kill Valves- & 2-Choke Valves mounted at drilling spool

Rig Houses:
Dog House, DRILLMASTER 9’ 1 1”W x 39’ 1 1”L
Doghouse / Change house Combination w/ 17’5”L
Driller’s House w/ Knowledge Box (5) Lockers, Bench Storage, Heater, Lights.
5’L Breezeway, 1 7’5”L Change House, w/Bench Storage, (16-Lockers,
Cabinets, Heater & Lights. Oil Field Skidded

Generator/Utility Houses
DRILLMASTER 1 1’10”W x 37’9”L x 11’ 6” T
Utility House w/Lights, Oil Field Skidded to include the following items.

No #1 380 Kw. AC CATERPILLAR Generator Package Powered by Caterpillar C-15
Diesel Engine S/N JRE01986 w/ 24 Volt Electric Start, Radiator, HD Air cleaner Gauges.
Marathon 572RSL4025 Generator End SN# 550989-0506, complete with Oil Field skid.
Hours# 17,278

No #2 380 Kw. AC CATERPILLAR Generator Package Powered by Caterpillar C-15
Diesel Engine S/N JRE01985 w/ 24 Volt Electric Start, Radiator, HD Air cleaner Gauges.
Marathon 572RSL4025 Generator End SN# 550989-0507, complete with Oil Field skid.
Hours# 16,933

NO. 1 GARDNER-DENVER EBE99N New 2006
Electro Saver II Rotary Screw Air Compressor S/N# S237421,
P/b TOSHIBA 30 Hp. Electric Motor, Mounted 240 Gallon Horizontal Tank.
Hours# 15,128

SIEMENS Interlock Panel, 600 Amp 480 Volt Main Lockout Disconnects breakers.

ALLEN BRADLEY Electrical Load center with magnetic starter & breakers,

SQUARE D 225 amp 240 volt panel with breakers

SQUARE D 75KVA Transformer 480 volt to 240 volt

DRILLMASTER 7’9”W x 13”H x 43’1”L Electrical
Suitcase.

DRILLMASTER 2’5”W x 1 3”H x 36’3”L Electrical Suitcases.

Mud System:
DRILLMASTER 9’6”W x 7’H x 34’5”L, 394 Bbl. Suction Tank
10’L Covered Porch, (3) Compartments,
(3) MAX 2000 Mud Agitators p/b TECO 25 Hp. Electric Motors,
Sloped Bottom, Top Mounted Walkways, Safety Rails, Lights, Oil Field Skidded.
FIVE STAR 6”x8”x14” Centrifugal Mixing Pump S/N 5284, p/b BALDOR 75 Hp. Electric Motor.
FIVE STAR 6”x8”x14” Centrifugal Mixing Pump S/N 5284, p/b BALDOR 75 Hp. Electric Motor.
With internal jetting system, 3 dump gates,

DRILLMASTER 9’6”W x 7’H x 34’7”L, 394 Bbl. Shaker Tank
10’L Covered Porch, (3) Compartments
MAX 2000 Mud Agitator Agitators p/b TECO 25 Hp. Electric Motors,
Sloped Bottom, Top Mounted Walkways, Safety Rails, Lights, Skidded.
With internal jetting system, 3 dump gates,

FIVE STAR 6”x8”x14” Centrifugal Mixing Pump S/N 5269,
p/b BALDOR 75 Hp. Electric Motor.

FIVE STAR 6”x8”x14” Centrifugal Mixing Pump S/N 5283,
p/b BALDOR 75 Hp. Electric Motor.

SHALE SHAKER, Fluid Systems Inc., Single Screen,
Linear Motion Shale Shaker S/N2450,

SHALE SHAKER, Fluid Systems Inc., Single Screen,
Linear Motion Shale Shaker S/N3089,

NOI DSN-ZH-10CTX Desander S/N 8714-5732,w/ (2) 10” Cones.

NOI DSL-10GG-4CTX Desilter S/N 8714-5731,w/ (10)4” Cones.

DRILCO “Deep Pit” Degasser p/b TECO 10 Hp. Electric Motor

Bubble Buster: Geothermal Type Bubble Buster

Mud House
DRILLMASTER 9’ 1 1”W x 26’L Mud House w/Mud Hopper, Test Sink,
Ventilation Fan, Electric Heater, Lights, Double Side Door, (2) End Doors, Skidded.
Includes 7’H Tri-Stand on one end the other end sets on suction tank.

Fuel Tank
DRILLMASTER 7’1 1”Wx8’Hx30’L, 13,860 Gallon Fuel Tank
w/ (2) AMT 1/2 Hp. Fuel Transfer Pumps p/b BALDOR 1/2 Hp. Electric Motors,
with Three (3)Compartment, Combo Lubester Oilfield Skidded.

Water Tank
DRILLMASTER 10’10”W x 8’1”H x 35’L, 529 Bbl. Water Tank
w/ 10’L Covered Extension, Pump Room, OilField Skidded
FIVE STAR 3”x4”x1 1” Centrifugal Water Pump
S/N 5420, p/b TECO 20 Hp. Electric Motor.
FIVE STAR 3”x4”x1 1” Centrifugal Water Pump
S/N5267, p/b TECO 20 Hp. Electric Motor.

Instrumentation
Weight Indicator
Mud Gauges.

Ancillary Equipment
DRILLMASTER 5’W x 2’4”H x 60’L, 2-Section Catwalk w/ Steel Deck and stands for string blocks.
Pipe Racks 5 Sets 29” x 30’ 1 set 29” x 12’ 1 set 41” x 30’
FIVE STAR “Retriever” Electric Measuring Device S/N 862, w/ 15,000 Ft. of. 092 Wire line
2 sets drill pipe elevators 5”
2 sets of drill pipe slips 5”
2 sets of drill collar slips 7” & 9”
2 sets tongs with all head for pipe & casing
2 sets of safety clamps
Mud box with 5” rubbers
108” X 4” elevator bails
Crossover, bottom hole, lifting Subs
Air Hoist Air Wrench, Model HUL40, S/N-REM10370, 9000 lb. Pull Rating
Air Hoist Air Wrench, Model KSUL, S/N-REM13962, 10,500 lb. Pull Rating
4,000 Ft. of 1-1/4” Drill Line, Mounted Spooler Stand
3-1/2” X 5,000 Psi. Rotary Hose
Vibrator Hose 2 Each 3 ½” x 18’
Rat hole
Mouse hole
8 rig matting boards
Small hand tools & wrenches
Fluorescent & Mercury-Vapor Rig Lights & Wiring Explosion proof
Atco Office/ living shack all electric w/ oil field skid

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Superior 1000 Mechanical Drilling Rig for Sale
2006 Built Superior Drilling Rig for Sale
1000hp Superior Drilling Rig for Sale
Superior 1000 M Drilling Rig for Sale in USA
Mechanical Drilling Rig for Sale in USA
---------------------------------------------------------------------------------------------------------

Superior 1000M Drilling Rig for Sale

ID 1918

Gardner Denver 1000hp SCR Drilling Rig for sale

Worldoils Marketplace

Worldrigs ID: WR150

Gardner Denver SCR Drilling Rig for Sale
1000hp SCR Drilling Rig for sale

Drawworks
Gardner Denver 1000 HP Drawworks with water brake.
Powered by (1) 752 series type traction motors.

Mast
DSI
142’ x 25’ mast rated at 750,000 lb. static hookload, 500,000 lb. setback

Substructure
DSI
22’ substructure with rotary capacity at 750,000 lb. and a setback of 500,000 lb.
Sub is a box-on-box type.

Pumps
Two (2) F1600 pumps
Independently powered by two (2) 752 traction motors.
Pumps complete with all plumbing, pulsation dampeners, and 5x6 charge pumps.

Rig Houses, tanks
Drillers top doghouse= 9’ H x 8’6” W x 35’L
Mudhouse= 9’H x 10’ W x 35’ L
Partshouse= 9’H x 10’ W x 45’ L
Water Storage= 9’ H x 10’ W x 45’ L with two (2) 2” x 3” centrifugal pumps.
Fueltank= 12,000 gallons

Mud system
Two (2) 8’6” H x 10’ W x 47’ L mudtanks (1000 BBL)
Tanks to have necessary piping, valves, dump gates, & compartments
One (1) 2-cone desander
One (1) 10-cone desilter
Two (2) derrick style linear shaker
Four (4) mud agitators with 10HP motors
Four (4) 5” x 6” centrifugal pumps with 75HP motors

Rotary Equipment
One (1) 27-1/2” rotary table
One (1) 400 ton swivel
One (1) Varco model HD Kelly drive bushing

Traveling Equipment
One (1) 400 ton block
One (1) set of 3 ½” x 108 elevator links

Well Control
One (1) 11” x 5000 PSI annular
One (1) 11” double ram preventor
One (1) 180 Gallon Koomey type closing unit
One (1) Koomey type remote
One (1) 2” x 5000 choke manifold
One (1) B.O.P. lines suitcase

Instrumentation
One (1) Totco type 50 weight indicator
One (1) Totco 100 rotary torque
Two (2) mudpump SPM
One (1) rotary RPM
All above mounted in Totco drilling console
Geolograph

SCR House
Ross Hill 3 generator x 4 SCR system
9’ W x 40’ L x 9’ H house

Power Equipment
(3) 3512 C Cats with 1050 KW generators
Generators mounted on 10’ W x 35’ L x 9’ H skids
(2) Gardner Denver 30 HP screw type compressors
(1) Gardner Denver cold start compressor

Auxilliary Equipment
One (1) Mathey wireline unit
Two (2) air winches
Misc. (1) set of handling tools
(1) Spinnerhawk powertong
(1) Kelly Spinner
(3) 18” x 30’ pipe racks

For more photos please visit : http://www.worldoils.com/landrigs/rig2002.php

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------
Search words (for official use only) :
Gardner Denver SCR Drilling Rig 1000hp for Sale
1000hp SCR Drilling Rig
Gardner Denver Drilling Rig for Sale
--------------------------------------------------------------------------------------------------

Drilling Rig - Gardner Denver SCR - 1000hp - for sale

ID 150

Worldoils Marketplace

Worldrigs ID: WR2070

12 pax Crew Boat for Sale
Over 20M Fast Utility Craft for Sale
Used Crew Boat and Fast Utility Craft for sale

General
Year Built 2004
Classification Bureau Veritas
Notation I, Hull, MACH, Crewboat, Unrestricted Navigation

Dimensions
Length OA 20.83m
Breadth 4.80m
Depth 1.35m
Draft (max) 1.05m
Clear Deck Area 18m²
GRT/NRT 31.96/ 28.76

Performance
Maximum Speed 27 knots at 5.5mt/24hrs
Cruising Speed 24 knots at 4.5mt/24hrs

Capacities
Deck Cargo / Deck Strength
Fuel Oil 9m³
Fresh Water 2m³

Propulsion System
Main Engines 2 x 570 bhp, Caterpillar C12/ Catpillar 3196
Main Generators 2 x 25 kva/ 50hz, Yanmar/ Meccalte
Propellers 2 x FPP

Life Saving Equipment
Life Rafts 2 x 15 men
All other life saving appliances as per SOLAS requirements

Accommodation
Passenger Seats 12 pax

Fire-Fighting / Anti-Pollution Equipment
External
FiFi System Nil
Fire Pump Nil
Monitors - (water) Nil
- (water/foam) Nil
Oil Dispersant System Nil

Internal
Emergency Fire Pump As per SOLAs requirements
CO2 system in engine room
Fire Detection & Alarm System in living spaces & engine room

Navigational and Communication Equipment
SSB 1 x Icom ICM 700TY
VHF 2 x Icom ICM 45
Radar 1 x JRC JMA 2344
1 x JRC JMA 1800
Navtex Receiver 1 x Furuno FA-100
DGPS Navigator 1 x Furuno GP 32
AIS 1 x Furuno FA-100
SART 1 x Sailor 9Ghz
EPIRB 1 x Samyung SEP 406
FBB-150 1 x unit for E-mail/telephone

Miscellaneous
Fresh Water Maker Nil
Oily Water Separator Nil
Sewage Treatment Plant Yes

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where
needed.

The details mentioned above are believed to be accurate but are not guaranteed.
----------------------------------------------------------------------
Search words (for official use only) -
12 pax Crew Boat for Sale
Over 20M Fast Utility Craft for Sale
20M Used Crewboat for Sale
2004 built Crewboat for Sale
Used Crew Boat and Fast Utility Craft for sale
Fast Utility Craft - 2004 built - For Sale
12 pax Crew Boat and Fast Utility Craft for sale
Used 2004 built Fast Utility Craft for Sale
-------------------------------------------------------------------------

Fast Utility Craft / Crewboat for Sale

ID 2070

Chicago Pneumatic T650 Drilling Rig for Sale

Worldoils Marketplace

Chicago Pneumatic T650 Drilling Rig - For Sale

ID 2544

Worldoils Marketplace

Worldrigs ID: WR647

Towing Tug for Sale
2007 Built Towing Tug For Sale
3200 BHP Towing Tug - For Sale

General :
Year build : 2007
Dimensions : 32 (LOA) x 9.20(B) x 4.60(D) m
Draft : maximum 3.80m
GRT/NRT : 296/88

Tankage :
Fuel oil : 250 cub.mt
Potable water : 40 cub.mt

Accomodation :
1 man cabin : 2 nos
2 men cabin : 1 nos
4 men cabin : 2 nos
Total complement : 12

Navigation & communication :
All round view wheelhouse
Forward and aft control
Radars, echo sounder, autopilot, GPS,
Weather fax, navtex receiver, satellite mini-M,
MF/AF radio, VHF radio, satellite tracking
system, Intercom/PA system

Towing equipment :
Winch : 1 x ME40THTW electro-hydraulic
Line pull : 40MT
Brake : 100MT
Drum cap : 700m x 44mm dia. wire
Tow hook : 1 x 50MT swl pneumatic spring
tow hook

Trial speed :
12 knots

Main machinery :
Main engine : 2 x CAT3512B, 1597B hp each, total 3194 bhp
Auxiliary engine : 2 x cummins
Diesel alternator : 2 x 124 KVA each, 400V/3P/50Hz

Anchors and cables :
Anchor : 2 x stockless bower anchor, each 480kg
Chain : 302.5m total length, 22m dia.,
grade 2 steel stud link chain

Cargo pump & misc equipment :
Fuel oil : 1 x 8m3/hr at 60m head
Portable water : 1 x 36m3/hr at 25m head
Sewage treatment : 1 x SBT-15 type, capacity 1000L
Fresh water maker : 1 x 2MT/day
Oily water weparator : 1 x IMO type, 0.5m3/hr x 2kg/cm2

Bollard pull :
40MT

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
--------------------------------------------------------------------------------------------------------
Search words(for official use only) -
Towing Tug For Sale
3200 BHP TowingTug - For Sale
Tugs For Sale in Middle East, India
2007 Built Towing Tug For Sale
Used 3200 BHP Towing Tug for Sale
Towing Tug For Sale in Singapore, Malaysia, Indonesia
-------------------------------------------------------------------------------------------------------

Towing Tug - 3200 BHP - For Sale

ID 647

Worldoils Marketplace

Worldrigs ID: WR1171

Anchor Handling Tug Supply Vessel for Sale
2011 built AHTS Vessel
8200 bhp AHTS for Sale
Bollard Pull AHTS for Sale

Principal Particulars
Length Overrall : 75.00 m
LengthWaterline : 72.88 m
Beadth Moulded : 16.00 m
Depth Moulded : 7.50 m

Draft (max) : 6.10 m
Built : 2011
GRT/NRT : 2150 / TBA
Class : American Bureau of Shipping
Notation : ABS + Al E Offshore Support Vessel AH, Towing Vessel
Fire Fighting ship Class 1, + AMS, ACCU + DPS-2

Performance
Maximum Speed : 14 Knots
Economical Speed : 10 Knots
Type of Fuel : Marine Gas Oil
Bollard Pull : 110 Tons

Fuel Consumption :
19 cbm/24 hr @ max speed
12 cbm/24 hr @ econ speed

Cargo Capacities
Deadweight : 2500 Ton (approx)
Deck cargo : 800 mt (approx)
Deck Strength : 7.5 Ton/sq.cm uniform loading
Clear Deck Area : 500 sq.cm meter (approx)

Fuel Oil : 850 cbm (approx)
Fresh Water : 355 cbm (approx)
Ballast/Drill Water : 1330 cbm (approx)
Liquid Mud : 395 cbm (approx)

Cement Tank : 226 cbm (approx)
Freezer / Chiller : l0 cbm / l0 cbm
Foam / Detergent : l0 cbm / l0 cbm

Pumps
Fuel Oil : 1 x 150 cbm/hr @ 75m head
Fresh Water : 1 x 150 cbm/hr @ 75m head
SWB/Drill Water : 1 x 150 cbm/hr @ 75m head
Liquid Mud : 2 x 100 cbm/hr @ 75m head

Bilge/Ballast : 2 x 60 cbm/hr @ 50m head
GS/Fire Pump : 1 x 80 cbm/hr @ 75m head
Bulk Cement Compressor : 2 x 28 cbm/min @ 6bar

Propulsion System
Main Engine : 2 x 3060kw (Wartsila 9L26)

Main Generator :
2 x 380 kw diesel driven, 415 V/3 Ph/50 Hz
2 x lSOOkw shaft driven

Emergency Generator : 1 x 94 kw, (brand/model TBA)
Bow Thruster : 2 x 10 Ton Thruster, approx 600 kw, CPP
Stern Thruster : 1 x 10 Ton Thruster, approx 600 kw
Steering Gear : 2 x 45 deg, twin screw type
Propulsion : 2 x CPP with kort nozzle, (brand/model TBA)
Rudders : 2 x high performance streamline type

Deck Equipment
Anchor Windlass : 1 x electro hydraulic, Zicom
Gypsies : Suitable for 44mm dia U2 chain rated pull 8 mt @ 12 m/main
Bow Anchors : 2 x 1850 kg HHP anchor
Chains : 467.5 m (L). 44 mm (Dia), GradeU2

Capstan : 2 x 5 mt @ 0-30 m/min electro hydraulic Zicom
Tugger Winch : 2 x 10 mt @ 0-15 m/min electro hydraulic Zicom
Drum Capacity : 200 m x 20 mm Dia
Deck Crane : 1 x 5 Ton @ 12 m
Towing/AH Winch : 1 x electro hydraulic double drum, Zicom
Upper Drum (Tow) : 1500 m (L) x 64 mm (Dia) SWR
Lower Drum Cap (AH) : 1500 m (L) x 64 mm (Dia) SWR

Line Pull :
200/250T on @ 0-5 m/min(low)
35 ton @ 0-23m/min (high)

Static Brake :
300 Ton @ 1st layer
Remoted and Local Control

Stern Roller : 5 m (L) x 1.8 m (Dia), SWL 300T
Lock Jaws : 1 x 300T SWL, electro hydraulic, Zicom
Tow Pin : 2 x electro hydraulic operated Zicom
Storage Reel :
1 x 5T @ 20 m/min,suitable for
1500 m (L) x 64 mm (Dia) SWR

Accommodation
Berths : 8 x 1 berth cabin = 8
16 x 2 berth cabin = 32
Total = 40
Hospital : 1 x 1 berth cabin = 1

All cabins fully air-conditioned & c/w attached washroom.

Radio and Navigation Equipment
GMDSS Area A3, consist of :
SSB : l x JRC/Furuno
Inmarsat C : 2 x JRC/Furuno
VHF Radio : 2 x JRC/Furuno
Navtex Receiver : l x JRC/Furuno

SART : 2 x JRC/Furuno
EPIRB : l x JRC/Furuno
Portable VHF Radios : 3 x JRC/Furuno
Radar : 2 x JRC/Furuno
Echo Sounder : l x JRC/Furuno

DGPS : l x JRC/Furuno
Gyrocompass : 2 x JRC/Furuno/Anschutz/Tokimec
Autopilot : 1 x JRC/Furuno/Anschutz/Tokimec
Magnetic Compass : l x JRC/Furuno
Weather Fax : l x JRC/Furuno

Speed log : l x JRC/Furuno
Wind Indicator : l x JRC/Furuno
AIS : l x JRC/Furuno
DP : DP 2 Sys. Kongsberg/Alstom/MT/Nautronix
Joystick : 1 x Kongsberg/Alstom/MT/Nautronix

Vessel also fitted with PA Talkback System & Self-·powered Telephone.

Fire-Fighting Equipment and Anti-Pollution Equipment
External :
Fifi system : Class 1 with water curtain all round
Fire Pump Monitor : 2 x 1500 cbm/hr @ 12 bar, FFS/Kvaener driven by front PTO ME
Water/Foam : 2 x fire monitors
Water : 1 x 300 · 1200 cbm/hr, FFS/Kvaener

Oil Dipersant System :
1 x 1200 cbm/hr, FFS/Kvaener
2 x cluster Nozzles

Internal :
Liferafts : 6 x 20, SOLAS standard, China Make
Rescue boat : 1 x c/w outboard engine, China Make
C02 system in engine room.

Fire Detection & Alarm in living spaces and engine room

Miscellaneous :
Liferafs : 6 x 20, SOLAS standard
Rescue boat : 1 x c/w outboard engine
Oily Water separator : 1 x 1.0 cbm/hr
Water Maker : 1 x 10 T/day
Sewage Treatment Plant : 1 x 40 men/day

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Anchor Handling Tug Supply Vessel for sale
8200 bhp AHTS for Sale
AHTS Vessel - 2011 built - for Sale
110 Ton BP AHTS for Sale
110 Tons Bollard Pull AHTS for Sale
2011 built AHTS Vessel
Anchor Handling Tug Supply Vessel - 2011 built
Overall 75m long AHTS for Sale
--------------------------------------------------------------------------------------------------------------------

Anchor Handling Tug Supply Vessel 8200 bhp for Sale

ID 1171

Worldoils Marketplace

Worldrigs ID: WR2421

Deck Crane for Sale

Description :

Technical Data
General :
Type of crane : L403 2/3033.5-2

Weight : 66 ton
Type of current : 3 - 60Hz
Supply voltage : 440V
Control voltage : 100V

Mechanical Data :
Jib radius ( At SWL = 40 tons) : max. 32.0m
Jib radius ( At SWL = 30 tons) : max. 33.5m
Jib radius : min. 2.4m
Lifting height H : 7.845m
Lifting height K : 27.155m

Hoisting capacity at jib radius 32m : max. 40 ton
Hoisting capacity at jib radius 33.5m : max. 30 ton
Hoisting speed at 0 -40/30 ton : 0 - 20 m/min.
Hoisting speed at 0 - 16 ton : 0 - 40 m/min.
Luffing time from max. to min. jib radius : 65 sec.
Slewing speed : max. 0.6 rev/min.

Wire rope, hoisting winch : ø 34 mm x 291.0m
                                              No. 388 8065-805
Wire rope, hoisting winch : ø 28 mm x 116.5m
                                               No. 388 3261-810
Wire rope, stabilizing winch : ø mm m
                                                  No.
Sling, stabilizng winch : No.

Cable for cable winchs : No.

Cable load-relieving : No.

Socket plug : No.

Clamp : No.

Electrical Data :
Main motor
Type of current : 3-60 Hz
Rated power, cont. : 185 kw
Rated power, 40% int. : 295 rev./min.
Speed : 1785 rev./min.
Rated voltage : 440 v
Starting current : 640 A

Gear box data :
Gear box type : 388 3140-801
Gear ratio : i = 0.683
Speed : rev/min

Hydraulic data :
Hoisting winch circuit : 187 5241-801
Pump type : 2 x 119 cm3
Hydraulic motor type : 078 0040-803
Flow rate, per rev. theoretical : 33780 cm3/rev.

Luffing winch circuit :
Pump type : 187 5241-802
Displacement : 2 x 119 cm3
Hydrualic motor type : 178 1322-801
Flow rate, per rev. theoretical : 16300 cm3/rev.

Slewing circuit :
Pump type : 187 5241-802
Displacement : 119 cm3
Hydraulic motor type : 388 3127-801
Flow rate, per rev. theoretical : 59.8 cm3/rev.

Feed and control circuit :
Pump type : 388 1669-801
Displacement : 49.1cm3
Feed pump motor
Type of curent : 3-60 Hz
Rated power 2 poles : 20 kw
Rated power 4 poles : 13 kw
Speed 2 poles : 3360 r/min
Speed 4 poles : 1680 r/min
Starting current 2 poles : 141A
Starting current 4 poles : 107A

Oil tank
Oil volume; Oil filling : 650 litres

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------
Search words (for official use only) :
Deck Crane for Sale
Used Deck Crane for Sale
66 Ton Deck Crane
-------------------------------------------------------------------------------------------

Deck Crane for Sale

ID 2421

Worldoils Marketplace

Worldrigs ID: WR536

Traction Winch for Sale
150 Ton Traction Winch

Description
- Storage winch c/w 1750m of 78.5mm wire
- 150t Capstan Winch
- 20ft containerised HPU
- Running line load cell
- Cooler for winch gearbox

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
-----------------------------------------------------------------------
Search words (for official use only) -
Traction Winch for Sale
Used Traction Winch for Sale
150 Ton Capstan Winch for Sale
Traction Winch - 150 Ton - For Sale
Capstan Winch for Sale - 150 Ton
Used 150 Ton Traction Winch for Sale
150Ton Traction Winch
---------------------------------------------------------------------

Traction Winch - 150 Ton - for Sale

ID 536

Tech RT 400 Hydraulic Drilling Rig for Sale

Worldoils Marketplace

Worldrigs ID: WR2890

Tech RT 400 Hydraulic Drilling Rig for Sale
525HP Tech RT 400 Hydraulic Drilling Rig - For Sale

Descriptions :

- Rig Tech Rt 400 525 Hp Grooved F/ 1-1/8" Line P/B Detroit Series 60 Diesel Eng,

Allison 6610 Trans, Eatonauxiliary Brake, International Derrick Service 67ft h X 8ft w,

500,000# Gnc, Hyd. Raised Mast Mtd. On 3-Axle

- Carrier W/ Venture Tech XK250 Hyd. Top Drive, Ids 12ft hx 10ft w Substructure W/ Mud Boat

Skid & Pipehandlingboom Arm (Note: 10ft 7" Clearance Under Rotary Beams) Sub & Mast

- Brake Cooling Unit, Approx. 600-Gal Water Tank W/ Allen Bradley Switch Gear,

(2) Cobra 2 X3 X 11 Cent Pumps, P/B 25 Hp Elec. Motors, Skidded.

- Kohler Model 400dse 380 Kw Ac Gen, S/N: 2023744,P/B Detroit Series 60, 585 Hp @

1800 Rpm Diesel Eng, S/N: 06R0815243, W/ Elec. Starter,Radiator, Gauges, Skidded;

Marathon Model 400d8E 380 Kw Ac Gen, S/N: 2019092, P/B Detroitseries 60,

685 Hp @ 1800 Rpm Diesel Eng, S/N: 06R0805025, W/ Elec. Starter, Radiator, Gauges,

Skidded; Venture Tech Hpu 250-Ton Hyd. Power Unit, P/B Detroit Series 60

Diesel Eng, S/N:06r0805644 W/ Elec. Start; Paletec Model 25DG Air Compressor,

P/B 25 Hp Elec. Motor W/ Air volume Tank; 12ft w X 50ft l Utility House W/ Cutler-Hammer

Series 2100 Elec. Controlpanel W/ Wiring, 75 Kva Elec.Transformer, Fluorescent Lights, Skidded.

- Rs-F1000 Triplex Mud Pump, 1000 Hp, Steel Fluid End, W/ Quick-Change Caps,

Odrill 3" Shear Relief Valve,Rod Cooling Pump, Wedco 6000# Pressure Gauge,

Bull Wheel, Master Skidded; Mud Hog 5" X 6" Chargingpump, 5000# Pulsation Dampener,

P/B Detroit.

- Hydril GK-10-900, 11" 3000# Annular Bop.

- 8ft w X 20ft l Crimped Steel Top Doghouse W/ Round Top, Knowledge Box, (4) Lockers,

Bench Storage, Cabinets, Parts Bins, 4-Station B.O.P. Remote Closing Unit, Fluorescent

Lights, Heater, Skidded; Drillers House Telescopes Down To 21ft l Porch Extension

W/ Junk Box Unitized On A Skid W/ 7ft 9"W X 20ft l Crimped Steel Change House

W/ 7ft 3"L Covered Porch Ext., Round Top, (13) Lockers, Bench Storage,

Parts Bins, 5-Station Type 80 Closing Unit.

- 7ft 10"W X 8ft 4"H X 40ft l 423-Bbl. Water Tank W/ 8ft l Porch Covered Ext. W/ Mud Hog

& Double Life 2" X 3" Cent Pumps, Skidded.

- 8ft Dia X 27ft 3"L 13,000-Gal Fuel Tank W/ 4ft 11"L Porch Ext. & 7ft 10"L Porch Ext. (2)

Fuel Transfer Pumps P/B 3 Hp Elec. Motors, 5-Compartment Lubester, Skidded

Tech RT 400 Hydraulic Drilling Rig - For Sale

ID 2890

Worldoils Marketplace

Worldrigs ID: WR1106

IDECO H-1000 Drill Rig Package for Sale
Used IDECO H-1000 Drill Rig Package for Sale
IDECO H-1000 Drill Rig with Package for Sale in USA

Model : H-1000 Drill Rig Package
Manufacturer : IDECO
Year : N/A
Condition : Used

Description :

Ideco H 1000 Drill Rig with Oil & Gas Package :

Ideco H-1000 Rambler Bir 800 1,000 Hp has been rebuilt
Capable of drilling to a depth Of 12,000’ ft deep
Sand line drum capable Of 25,000’ ft
1 1/8” drilling line and grooving
Ideco H-1000 Rambler Bir 800 1000 Hp. with 7 Axles -
Drawworks has been gone through completely, rebuilt new.
Drumshaft And Catshaft made of Astreloy installed with new bearings.
Rotary drive torn down and rebuilt new
Clutch pads and new clutch drum installed with new splined hub.
New 2 catipillar C-18’s 630 Hp each were installed with new 6061 transmissions.
Right angle gear boxes were inspected and rebuilt new
Srr-28 Hydromatic was sent to Parkersburg rebuilt new
Drawworks has all new chains, bearings and U joints

Main drum clutch has new pads with new clutch drum.
All oiler, Air And Hydrolic lines are new. Drillers conslole is new
The Ideco H-1000 unit has all new tires and wheel bearings front and back.
All rear-ends are rebuilt new and all gear boxes are new
Mast : ideco 358,000lb Hook load Quicklift 112-358 with racking
board complete with stand pipe.

Crown rebuilt new. New main cylinders and hydraulic tongs cylinders
were added to mast
Racking Board was rebuilt new - Work done by Delta Oilfield Tank Co.
Substructure : New 10’ H X 10’ W X 18’ L with 2’h X 10’w X 18’l Pony sub,
winterized, with stairs.
It has rebuilt new hydraulic back up system and all new flourescent lights
and wiring that meets all specifications. Sub was sandblasted and has new
beams - work done at delta oilfield tank co.
Rotary table : Ideco 37 ½” table, work by Farleys Machine Shop
Blocks : Rebuilt new Ideco 265 ton 5 Sheaveshorty block inspected and
rebuilt new by Farleys Machine Shop

Swivel : National N-815 with quick change - Work done Burgess rig repair
Kelly Hose : 4” X 55’
5 ¼ Hex Kelly
Bop : Used 11” 5000# Schaffer double gate
Annular : Used 11” 5000# Hydril annular
Used 3” X 4” 5000# Choke manifold

Mud Tanks (Refurbished) :
Shale Tank :
Equipped with 2 Swaco Als shakers with two new 5” X 6” circulating pumps
with 50 hp. motors, 1 – new 2 cone desander and one poor boy gas buster, 1 agitator,
with all lighting and electrical and wedge type mud gates

Suction tank :
Equipped with two new 5” x 6” circulating pumps with 50 hp. One 10 cone desilter,
three agitators and mixing hopper.complete with all lighting and electrical.
New wedge type mud gates. Mud tanks were rebuilt new in Delta Oilfield Tank’s Shop.

Mud Pumps :
Rebuilt new Gardner Denver PZ-9, American made, in a house with new 3508 Catipillar
engine, 1200 rpm, and a new 5” x 6” charging pump with 50 hp electirc motor.
New dampner and new valving radiator is independently driven with electric motor.
Generator house :
Contains 2 new 3406 Catipillar 410 kw generators, also two new Gardner Denver 30hp
screw air compressors, 1 four station rebuilt new accumulator with new remote,
1 new 10kw electric heater, 75 Kva transformer and a new complete 480 volt
electric panel. New fuel daytank and new oil bunker included.

Water Tank :
10’w X 38’l X 9’ H 350 Bbl capacity with 2 New 2” X 3” circulating pumps
Doghouse : Like new 8’W x 18’L contains new electric panel and lockers.
Have electrical controls for equipment in doghouse.
Doghouse drops into water tank.
Hands change and parts house : contains lockers and shelving for parts.
Rig complete with new all lights and electrical
Martin decker diaphram and indicator
Fuel tank : 8,000 gallon with new electric pumps
New cat walk : 42” H x 4’ W x 52’ L with new beaver slide
Complete new set of stairs, railings and tarps

Ramps : 3 piece (2 - 2’ H x 71’L and 1 – 9’10” W x 34’5” L)
American made in Navasota, Texas in Tuboscope - 18,000 feet of new g-105 16.60
drill pipe, inlaid hardband, internally coated and made-up and broke out twice
by Tuboscope in Houston, Texas (never been used)
American made in Navasota, Texas in Tuboscope - 21 new 6 ½” spiral drill
collars (never been used)
21 4 ½” spiral wt. pipe
6 Pipe baskets
4 Pipe racks
All electrical work done was by Rocky Mountain Electric

Canvas
Used handling tools
Used tongs
Used elevator
Spare equipment
6061 transmission
1 1/8” Lebus grooving
Spare drive lines & U-joints
Rebuilt new main hydraulic cylinders
Set of brake bands
Set of cables for doghouse and water combo
Both catheads that were taken off

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------------------------------------
Search words (for official use only) -
IDECO H-1000 Drill Rig Package for Sale
Used IDECO H-1000 Drill Rig Package for Sale
IDECO H-1000 Drill Rig Package for Sale in USA
Used IDECO Drill Rig Package
Drill Rig Package for Sale in USA
Used IDECO H-1000 Drill Rig for Sale
IDECO H-1000 Drill Rig with Oil & Gas Package
Oil & Gas Package for Drilling
------------------------------------------------------------------------------------------------------------------------

IDECO H 1000 Used Drill Rig with Oil & Gas Package for Sale

ID 1106

Worldoils Marketplace

Anchor Handling Tug Supply Vessel - For Charter

ID 2933

Worldoils Marketplace

Worldrigs ID: WR1430

Schramm TH130 Drilling Rig for Sale
750 hp Schramm TH130 Drilling Rig for Sale

Description :

Schramm TH130 -,760 hp deck engine, 28 inch (711 mm) table opening ,
1350/350 – 1150/500 variable volume compressor (38 cu. m/min
@ 24.1 bar & 32.6 cu m/min @ 35.5 bar), 50 feet (15.25 m) of clear
head travel, Capable of handling Range III casing

Mast : telescoping, 130,000 lbs. (59,090 kg) actual pullup

Back on Ramp

Mud System : 12 x 50 pit with shale shaker

Mud Pump : D500 Emsco Duplex Pump
(2) 1150 HD x 350 Sullair Comp Hurricane Booster Trailer-Mounted
(2) 1150 HD x 350 Comp Hurricane Booster Trailer Mounted

WB12 Joy Booster

Doghouse, fuel tank, light plant, trailer mounted

Drill Pipe : 3500’, 4 ½” Range 2

Pipe & Collar Trailer

Rig can be set up with mud or air

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Schramm TH130 Drilling Rig for Sale
750hp Schramm TH130 Drilling Rig for Sale
Schramm Drilling Rig for Sale
Schramm TH130 Drilling Rig in USA
2003 Built Schramm Water Well Drilling Rig
Used Schramm Drilling Rig for Sale
---------------------------------------------------------------------------------------------------------