Drawworks :
Mesa, Model 1500 Hp, M, Split Level with Catworks, Brake Parkersburg, Model RC60 Hydromatic with Overriding Type “A” National Clutch with Gardner Denver Inline Compound for 3 Engines And with 1) Air Compressor Complete Package, Rebuilt By Spartan Equipment, June 2006

(3) Power Units :
Caterpillar Model C-18, Diesel Engines, 630hp Ea Complete, And with radiators, approx 1200 Hrs On Each Engine Since New, Skid Mounted.

(3) Torque Converters :
Oilworks, Model 195-100, Odessa, Used Approx 1200 Hrs Since New

Mast :
Lee C Moore, 142’, 1,385,000 Lbs, SHL Capacity, Angle Leg with Crown Block 1-3/8” 6 Sheave And with (1) Fastline Sheave, with Derrick Boom, Racking Finger Board

Substructure :
Elevating Type, 22’ High, 1,000,000 SHL Capacity, 750,000 Set Back, with National Deadline Anchor And Sensator, Type “E-B” with Derrick Raising Becket And Derrick Stand

Mud Pumps :
Two (2) Lewco, 1300 Hp Complete with Matco Pulsation Dampener with Charging 5” X 6” Centrifugal Pump, Matco 8000 Psi Guages, 5000# Psi Fluid Ends, with Pump Skidded, Powered By Caterpillar D399 Diesel Engine. (1) Engine Has 1360 Hrs And 1) Has 1148 Hrs Since Overhaul, Each with Radiators, Master Skidded.  (Note: Pumps Were New 2006 And Has Same Hours As Power Units Above.)

Mud System :
Complete 1650 Bbl Mud System with (3) 550 Bbl Mud Tanks, with 15 Hp Mud Agitators And Mud Guns, 3) Shale Shakers, Derrick, 3 Stage, Desilter - 16 Cone, 3 Cone Derrick Desander Each P/B 5x6 Centrifugal Pump And GE 75 Hp Electric Motor with (3) 6”X8” Centrifugal Mud Mixing Pumps, Each P/B Ge 100hp Electric Motors, with Swaco Degasser, (1) 50 Bbl Slugging Tank, All Tanks Are Ultra Sound Inspected And Are Capable Of Handling Mud Weight Up To 25 Lbs Per Barrel – All Rebuilt And Finished Before May 6, 2006.

BOP :
(1) Shaffer 13-5/8” 5000 Psi, Spherical, with 5000 Psi Std Top And 10,000 Psi Flanged Bottom (1) Shaffer Sl, Double, Ram Type Flanges Top And Bottom, with (4) Flanged Outlets, with Blind And Pipe Rams (1) Shaffer Sl, Single Ram Type, Flanged Top And Bottom, 10,000# Psi with Pipe Rams. Bop’s Were Completely Refurbished By Church Energy, May 2006

Traveling Block :
National, 500 Ton, with Clevis, 6 Sheaves X 1-3/8”

Hook :
Joy, Hydra Hook with Clevis, 500 Ton

Rotary Table :
Ideco, 27-1/2” with Varco Pin Drive, Master Bushing, with Drive Sprocket

Swivel :
National, Model N-1324, 500 Ton

Kelly Drive Bushing :
5-1/4” Hex, Pin Drive

Kelly Spinner :
International With 2) Motors Forward And Reverses

Accumulator :
Koomey, Model 80, 18 Bottles, 20 Gal, with (6) Stations, with Triplex Electric Powered Pump And with (2) Air Pumps, Master Skidded, with Koomey 80 Remote Control Unit And with 100’ High Pressure 1” Lines

Choke Manifold :
New 2006, By Church Energy, 4” X 10,000 Psi with 4) 3” Valves, 1) Manual Choke, 1) Hydraulic Choke Church with Control Panel, Total Values (8) with Master Skid

Generator House :
9’w X 35’ Long X 8-1/2’ H, Crimped Metal, with 2) Cat 3412 Ta Diesel Engines, Each Powering 550 Kw Sr4 Generators, with Distribution Elect Panel, Transformers And with 2) Screw Type Air Compressors

Top Dog House :
8’w X 20’l X 10’h with Knowledge Box, Lockers, Bench Storage

Drilling Spool :
13-5/8” X 10m, with 2) 4” Flg Outlets, with Cross Valves, 10,000# Psi, 1) Hydraulic 4”, 1) Manual 4”, 2) 2” Manual And 1) Bell Valve

Auxiliary equipment :

Fresh Water Tank, 600 Barrel

2) Rotary Hoses, 3”, 1) New, Still In Box

Set Cat Walks And Pipe Racks for Rig

Complete Set Suite Cases And Walkways for Rig

Complete Set Rig Lighting And Lighting Controls

Complete Set Of Hand Tools To Operate Rig

Approx 7000’ Of Drilling Line, 1-3/8” w/ Electric Spool Rack And Metal Spool, Mtd On Master Skid

4) Air Hoist, Ingersol Rand, 8 To 12 Tons Each

Set Of Tongs, Bj Type “B” with Jaws

Pipe Spinner, Spinner Hawk

Drill Pipe Elevators, Ww 350 Ton

2) Drill Pip Slips, Varco

2) Drill Collar Slips

Mud Bucket

Tool Basket, 8’w X 18’l X 3-1/2’h with Tool Box

Lot, Extra Mud Pump Parts

Set Of 2) Elevator Links 132”, 350 Ton, Complete Set Of Fire Extinguishers for Rig Requirements

One Complete Set Of Hard Wood Matting Boards for The Rig