750 HP Single Drum Drawworks six axle Carrier Mounted Rig
Workover Rig For Sale
Carrier Mounted 775 HP Single Drum Rig

Drawworks :
775 Drum Main Barrel :
Dimensions : 18. in. x 43 in.
Wireline size : 1-1/8 in. (Drawworks Drum Is Dynamically Balanced To Ensure
Smooth Running. Wide Barrel Design Reduces Line Interference.)

Auxiliary Host : Hydraulic Rotzler hoist mounted on the rig deck. Hoist
capacity is 10,000 lbs. and includes hydraulic controls & internal braking
System plus 275’ of ½ in wire line.

Mast :Telescoping 112' square tubed mast

Crown block : set up for a 8 line string-up.

Substructure :
12’ cantilever sub base with a 12” mud ramp
and 30’ base beam with turnbuckles that attaches from the y-base to the
base beam for increased stability .

Power plant & transmission :
Engine : (2)new detroit 60 series set at 425 hp, inline 6 cylinder,
4-stroke turbo charged, after-cooled engine rated at 425 hp. at
2,100 rpm.

Engine specifications : Model number DD4, six (6) cylinders 4-stroke /
cycle engine. Engine displacement 14.0 liters, rated power output each (gross)
475 hp @ 2,100 rpm.

Tansmission : Allison 4500 automatic transmission

Power swivel :
XK-250 Power Swive250 Ton@5,000 P.S.I.

Air system :
One (1) engine driven 48 CFM compressor pressurizing
a 8-tank air system

Electrical system : 12-volt electrical system, consisting of 100-amp
alternator, (6) batteries, 12V Starter and voltmeter. B

Hydraulic system : 53 Gallon per minute system provides 2,500 psi.
Working pressure for all rig hydraulics and accessory drives.

Tong circuit : Rig hydraulic system provides a 2500 PSI / 50 GPM
tong circuit.

6-axle carrier : Carrier is a heavy-duty 6-axle oilfield carrier with three front steering axles,
two rear-driving axles and one push axle.

Final estimated assembled specification :  Length: 48 ft. 0 in. est
Carrier Length: 64 ft. 8.in. est
Mast Width (traveling) 11ft. 2-1/2 in. est
Finished Weight: 118,000 lbs.

Carrier front axle : (3) three Arvin Meritor 60,000 lb capacity total
wheels: (6) six 22.5 x 12.25 hub piloted, brakes: 16.5 x 6 abs, with / auto slack
adjust, tires: Wanli 445/65r225, Front Suspension: 6 h.d. springs, Steering:
Shepard MCP-110 with 2 boosters front and rear for steering ease.

Rear axle : Arvin Meritor RP23160,RR23160 dual-drive, mixed ratio 6.83
Wheels: (8) 22.5 x 8.25 hub piloted 72,000 lb capacity each, Tires: 8 each,
ply/tread 16 ply 11R225, Brakes: 16.5 x 7 abs with auto slack adjust.

Rear suspension : Front rear axle Ridewell 25,000lbs capacity
tandem rear axle equalizer beam 46,000 lb capacity, 54” centers

Rig leveling system : Rig leveling is done with (4) hydraulic leveling
jacks with locks.

Block : (1) new Sentry 190-ton block/hook combination. Fixed rotating hook.
Set up for 8 line string.

Wireline : Wire line package consisting of 14,400 Ft. 9/16 in sand line
(4) belly guy lines Included in Package.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------
Search words(for official use only) - 
Workover Land Rigs for sale - 775 hp 6-axle
Land Rig for Sale - New 375hp Rig
All American made Carrier Mounted 6-axle workover rig - new
New Land Rigs from America - Workover Rig
US made Land Rigs For Sale
New Workover Rig For Sale - Four Axle carrier Mounted
775hp Workover Rig For Sale
-------------------------------------------------------------------------------------------------------