Superior 700 10,000’ Mechanical Drilling Rig

Drawworks
Superior 700, drum grooved for 1-1/8” drilling line, Foster Catheads, driven by (2) 3406 Cat engines into a Superior drive
compound model number HVA-500, S.N. 1-122 to an Allison Automatic 6 speed transmission

Derrick
133’ Dreco manufactured in march 1981, S.N. E8550-550, 428,000# SHL with 10 lines

Substructure
Dreco Bosx on Box, S.N. E-8245-459, manufactured in march 1981. Bottom box dimensions ;50’L x 8’W x 10’H, Bottom (pony)
Subs 49’10”L x 6’4”W x 5’H, Top Subs 45’3”L x 6’4”W x 9’H.

Mud Pumps
Pump #1 – Emsco F800, S.N. 222 p/b Cat 398, pulsation dampener – Emsco K75. Pump #2 – Gardner Denver PZ-9 p/b Cat 398,
pulsation dampener – Hydril K20. Both pumps equipped with 3” x 5,000 Oteco pop offs

Mud System
600 Bbl total in (2) tanks, Swaco Mongoose 4-screen shale shaker, S.N. A7102611, (2) vertical mounted and (1) horizontal
mounted agitators, (1) Cat model 310 power washer

Traveling Equipment
Ideco 255 Ton Shorty Block, S.N. 276, Ideal Model N69 Swivel

Rotary Table
Ideco 23B, 23”

Buildings & Structures
Water Tank (old) 40’2”L x 10’W x 11’H, Water Tank (new) 40’3”L x 10’W x 9’H, Mud Tank (suction) 35’L x 10’W x 9’H,
Mud Tank (shale) 40’L x 10’W x 9’H, Pump HSE (F800) 28’3”L x 12’W x 10’9”H,
Pump HSE (PZ9) 24’L x 9’2”W x 10’9”H, Light Plant, Fuel 43’L x 12’W x 9’9”H,
Koomey 16’L x 10’W x 9’H, Parts 37’7”L x 10’W x 9’7”H, Dog HSE 21’L x 10’W x 9’2”H, Boiler 30’L x 10’W x 9’2”H.
All structures measured skin to skin except sub and mud tanks which are measured skid to skid.

Accumulator
Koomey 5 station with (16) 10 gallon bottles with a Cat model 660 and (2) air accuated pumps.

BOP
Annular – 11” 5,000PSI Texas Topper, Rams – Hydril 11” 5,000 PSI double gate with 4” 5,000# mud cross,
(1) HCR valve 3” 5,000 PSI flange by flange R35 ring gasker, (2) McEvoy manual gate valves 3” 5,000 flange by flange,
(1) 11” 5,000 by 11” 3,000 crossover spool 14” long, (2) double stud adapters 3” 5,000 by 4” 5,000.

Choke Manifold
(7) 3” National Manual Valves, (1) 2” National Manual Valve, (1) 3” National Manual Choke Valve,
(1) 3” Willis Super Choke, (1) Double stud adapter 3” by 2-9/16”, Choke manifold rated at 5,000PSI,
(1) Choke steel cased choke hose 31’ long with 3” 5,000 R35 ring gasket flange + 4” 5,000 R39 ring gasket flange.
Drill Pipe / Collars: 4 ½” 16.6 “G-105” Grade 4 ½” XH Connection (80 Joints), 4 ½” 16.6 “X-95” Grade 4 ½” XH
Connection (185 Joints), 4 ½” 20.00 “X-95” Grade 4 ½” XH Connection (20 Joints).
(2) 8” Collars – 6 5/8” (box) x 6 5/8” Reg (pin), (15) 6” Collars – 4” H90 (box) x 4” H90 (pin).

Auxillary Equipment
Kelly 5 ¼” hex with 6 5/8” R (left hand box) x 4 ½” XH (right hand pin), Bales ;250 ton 8’ Long,
Elevators Varco 250 ton for 4 ½” pipe, Tongs Varco HT-55, Slips and Collar Clamps,
Kelly hose 4”x 60’, (2) vibrating hoses 4” x 16’ long, Air Tugger (Ingersoll rand), Air compressors,
survey machine, operating instruments, torque sensor, pump pressure gauges,
spare rotary table drive shaft, seat puller, (6) pipe tubs, (4) sets hi pipe racks,
(1) set short pipe racks, Boiler Lister 80 HP s/n B-6771.2